- Out-of-Stock
Gravity: SHT1x Temperature & Humidity Sensor - module with SHT10 temperature and humidity sensor
ID: 581609
Module with an analog temperature and humidity sensor based on the SHT10 system. It is characterized by high reliability and stability with low energy consumption. It is compatible with 3.3V and 5V controllers. DFRobot DFR0066
Description
Module with an analog temperature and humidity sensor based on the SHT30 system by Sensirion. It is characterized by high reliability and stability with low energy consumption, fast response and resistance to interference. The sensor is internally calibrated and rugged to generate analog output voltages that are linear with temperature or humidity. It is compatible with 3.3V and 5V controllers such as Arduino, micro:bit, ESP32. On the Wiki page there is a user manual and sample programs.
Features
- System (sensor): Sensirion SHT10
- Temperature sensor:
- Range: -40 ~ 128.8 ° C
- Resolution: 0.01 ℃, 14 bit
- Accuracy: ± 0.5 ° C
- Response time: 5 to 30 seconds
- Humidity sensor:
- Range: 0-100% RH
- Resolution: 0.05%, 12 bit
- Accuracy: ± 4.5%
- Response time: 8 s
- Interface: analog output (PH2.0-3P, analog output voltage 0.3-2.7V)
- Input voltage (VCC): 3.3V to 5.5V
- Dimensions: 27 × 32 mm
- Weight: 5 g
Kit contains
- Gravity module with SHT10 temperature and humidity sensor
- 2 x Gravity-3P cable
581609
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 55
Available
Available
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
zł21.65
24h
Available quantity: 2
Available
Board with ATmega1280 microcontroller from the AVR family, the user has 54 I/O lines, 14 PWM channels, 16 analog inputs. DFRobot DFR0003
zł89.20
Delivery date unknown
No product available!
Other products in the same category (16)
No product available!
HK Heavy Duty Alloy 1in Servo Arm - Hitec (Red) (18374)
Retired
No product available!
Dagu Rover 5 Tracked Chassis with Encoders
Retired
No product available!
No product available!
USB camera module with 8 MP resolution based on Sony IMX179 1/3.2" matrix compatible with UVC. It has variable focal length adjustable from 5 to 50 mm. Equipped with a lens with CS mount with integrated UV filter. ArduCAM UB0213
Retired
No product available!
No product available!
A small size module with 5 pins led to the USB Mini-B connector. The system can be connected to a contact plate or used as an unregulated and unlimited voltage source 5V and current up to 100mA. BOB-09966
Retired
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
7-segment LED display, 1 13.20mm digit, red color (660nm), 6 mcd / seg (10mA), common anode, Pb-free. LED1-AS-B-05211BS
Retired
No product available!
Module with a relay with a permissible maximum current of 10A with a 5V coil (MOD-03.Z). The module has a transistor relay control transistor and an overvoltage / self-inductive diode from the coil.
Retired
No product available!
No product available!
Module with an analog temperature and humidity sensor based on the SHT10 system. It is characterized by high reliability and stability with low energy consumption. It is compatible with 3.3V and 5V controllers. DFRobot DFR0066