- Out-of-Stock

Module with 5x7 LED matrix displays (30x7 in total with a decimal point) designed to work with the Raspberry Pi. It is based on three IS31FL3730 controllers and communicates via the I2C interface. It is possible to individually control each LED, making the module suitable for displaying simple animations, text and images. Documentation with a library and examples is available in the GitHub repository.
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
Module with 6 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM187
No product available!
No product available!
No product available!
Banana PI BPI-M2 Ultra is the open source hardware platform, Banana PI BPI-M2 Ultra is a quad-core cortex -A7 CPU ,use Allwinner R40 design, it support WIFI+BT on board.and support SATA interface on board
No product available!
No product available!
No product available!
No product available!
No product available!
Module with a differential I2C transceiver allowing to extend the range of the I2C communication bus. The differential signals are sent over an Ethernet cable that plugs into the RJ-45 connector. SparkFun BOB-14589
No product available!
9.7:1 Metal Gearmotor 25Dx48L mm with 48 CPR Encoder
No product available!
No product available!
No product available!
ArduCam camera module with autofocus designed for Raspberry Pi. It was equipped with a matrix (Sony IMX219) with 8 MPix resolution and an integrated IR filter. To connect the camera with Raspberry Pi is implemented using a CSI connector. Autofocus allows sharpening in the range from 4 cm to infinity. ArduCAM B0122
No product available!
No product available!
No product available!
No product available!
No product available!
Module with 6 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM187