- Out-of-Stock
ArduCAM IMX219 Low Distortion IR Sensitive (NoIR) Camera - camera module for Raspberry Pi
ID: 586882
5906623403813
Camera module 8 MPx with IMX219 sensor and lens with a viewing angle of 75°. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0188
Description
Module with IMX219 sensor intended for use as a spare element on the RPI Camera Board V2. The sensor used has an 8 Mpx matrix and allows video recording at resolutions 30fps @ 8MP, 60fps @ 1080p, 180fps @ 720p.
The module requires an RPI Camera Board V2 board to be connected to Raspberry Pi or Nvidia Jetson Nano minicomputers through a dedicated socket located on the top of the board. The module uses the MIPI CSI-2 interface specially developed for cooperation with cameras.
Attention!
The set does not include the RPI Camera Board V2 board necessary to start the camera.Features
- Works with all versions of Raspberry Pi or Nvidia Jetson Nano - RPI Camera Board V2 is required for connection
- Matrix: IMX219
- Resolution: 8 Mpx
- Optical size: 1/4 inch
- Viewing angle: 75°
- EFL: 2.8mm
- F.NO: 2.8
- ADC resolution: 10-bit
- Output interface: 2-lane MIPI serial output
- Output formats: 8/10-bit BW RAW
- No IR filter
586882
Data sheet
- Resolution
- 8MPx
- Interface
- MIPI CSI-2
- Sensor
- Sony IMX219
- IR filter
- No
- Lens assembly
- M12
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
High quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It\'s capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60, and 640x480p90 video
zł79.90
24h
Available quantity: 65
Available
Flex Cable for Raspberry Pi Camera - 100mm / 4"
zł2.90
24h
Available quantity: 535
Available
Flex Cable for Raspberry Pi Camera - 300mm / 12"
zł4.31
24h
Available quantity: 88
Available
100cm flexible cable (tape) for connecting the camera module to Raspberry Pi computers. The tape has 15 wires and 1mm pitch
zł8.19
24h
Available quantity: 49
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
24h
Available quantity: 107
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł252.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł348.90
24h
Available quantity: 105
Available
Other products in the same category (16)
No product available!
Retired
No product available!
No product available!
Spring dedicated to the heating table of 3D printers. It allows you to adjust the degree of tightening the knob, and thus enables the proper leveling of the working table
Retired
No product available!
No product available!
Starter kit with LOGO! 8 230RCE, software and necessary accessories. Siemens 6ED1057-3BA03-0AA8
Retired
No product available!
John Lindon, George E. Tranter, David Koppenaal
Delivery date unknown
No product available!
No product available!
MG2639 SparkFun Cellular Shield is a perfect addition to any Arduino project that requires connectivity when there’s no WiFi or Ethernet access nearby. The ZTE MG2639 module, which this shield is built around, supports SMS, TCP, UDP, and can even be used to make or receive phone calls. CEL-13120)
Retired
No product available!
MYIR MYS-7Z0007S-C is a single board module based on the Xilinx XC7Z007S-1CLG400C chip (Zynq-7007S). This system consists of a single-core processor based on Cortex-A9 core, which can operate at a maximum frequency of 667 MHz and Artix-7 FPGA. The computer is equipped with 512 MB of DDR3 SDRAM, 4 GB of eMMC memory and 16 MB of QSPI Flash memory
Retired
No product available!
No product available!
No product available!
Jacek M. Wojciechowski
Delivery date unknown
No product available!
Display 2x24, 118x36 mm, FSTN, extended temperature range "fast"
Retired
No product available!
No product available!
No product available!
Camera module 8 MPx with IMX219 sensor and lens with a viewing angle of 75°. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0188