- Out-of-Stock
Filament ROSA3D PVB 1.75mm Smooth Green Transparent
ID: 587911
5907753131652
ROSA3D filament made of high quality PVB. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PVB Smooth Green Transparent
Description
1.75 mm PVB filament for 3D printing by ROSA3D. 0.5 kg of filament is wound on the spool. The recommended printing temperature is in the range of 200°C to 225°C, and the bed temperature during printing in the range of 65°C to 75°C, however, when using adhesives, heating the bed is not necessary.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and high accuracy of the diameter and roundness of the filament.
PVB filament (polyvinyl butyral) from ROSA3D is a polymer that allows you to obtain effective-looking, transparent prints. To achieve this effect, the surface of the finished printout is sufficient to treat with isopropyl alcohol (IPA). The ease of printing makes it suitable even for people starting their adventure with 3D printing. The material is characterized by low shrinkage and no odor. Thanks to the possibility of obtaining a transparent structure, it is perfect for printing a wide range of designer, single-walled items such as vases or lamp shades. Made of PVB, filled figures or sculptures, after surface treatment look as if they were removed from the injection mold.
Please note that PVB filament is hygroscopic. For this reason, it should be stored tightly closed and dried immediately before printing.
Features
- Color: Smooth Green Transparent
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02mm
- Printing temperature: 200°C to 225°C
- Bed temperature: 65°C to 75°C
- Print speed: 60 to 80 mm/s
- Density 1.09 g/cm3
- Odorless smell
- Tensile modulus 2500 MPa
- Heat deformation temperature 55°C (HDT A according to ISO 75)
- Vicat softening temperature 70°C
- Charpy impact strength unnotched, 23°C: 106 kJ/m2; Notched, 23°C: 2 kJ/m2
- Net weight: 0.5 kg
587911
Data sheet
- Rodzaj filamentu
- PVB
- Ilość filamentu
- 0,5 kg
- Diameter
- 1,75 mm
- Colour
- Green
You might also like
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł52.90
24h
Available quantity: 22
Available
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Red Jasper Satin
Delivery date unknown
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter White Pearl Satin
Delivery date unknown
No product available!
Easy PLA filament in Pink, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Pink
zł75.01
24h
Available quantity: 1
Available
3D printer with a filament sensor and colorful LED backlight. For self-assembly, included with the necessary accessories. BIQU B1
Regular pricezł1,099.01zł639.60
24h
Available quantity: 5
Available
Other products in the same category (16)
Minicomputer with Realtek RTD1395 ARM Cortex-A53 quad-core processor, Mali 470 MP4 GPU graphics card, 1 GB RAM, 8 GB eMMC, WiFi, BT 4.2 and numerous connectors. Banana Pi BPI-M4
Retired
No product available!
An expansion board for building a vehicle or a mobile robot designed to work with BPI:bit or micro:bit modules. Banana Pi BPI:bit robot expansion board
Retired
No product available!
Evaluation kit with the ESP-WROOM-32 system. Provides WiFi and BT4.2 communication. Dimensions and pin layout are compatible with the standard used in Arduino Uno kits. Banana Pi BPI-UNO32
Retired
No product available!
Minicomputer with Allwinner H616 Cortex-A53 quad-core processor. It is equipped with a Mali G31 MP2 GPU and 512 MB of RAM. The set provides WiFi communication and Bluetooth 5.0. Orange Pi Zero2
Retired
No product available!
Filament by PlastSpaw with an excellent quality-price ratio. Made of high-quality PLA granules. 1 kg of filament with a diameter of 1.75 mm is wound on the spool
Retired
No product available!
Filament by PlastSpaw with an excellent quality-price ratio. Made of high quality ABS granules. 1 kg of filament with a diameter of 1.75 mm is wound on the spool
Retired
No product available!
Filament by PlastSpaw with an excellent quality-price ratio. Made of high quality ABS granules. 1 kg of filament with a diameter of 1.75 mm is wound on the spool
Retired
No product available!
Universal charger for 1-6S Li-Ion, LiPo, LiFe, LiHV, Pb, Ni-Cd and Ni-MH batteries. It has a built-in function of generating and measuring PWM, PPM and S.BUS signals. ToolkitRC M6
Retired
No product available!
Programmable self-balancing robot based on the micro:bit module. It has a built-in driving algorithm and is equipped with an ultrasonic distance sensor, an infrared sensor to avoid obstacles, an IR receiver and a color sensor. Qbit
Retired
No product available!
Audio recorder module that allows for multiple recording and playback of sounds up to 6 seconds long
Retired
No product available!
Shield Arduino with dual driver for DC motors VNH2SP30. It allows you to control two DC motors with a supply voltage of up to 16 V and a current consumption of up to 30 A. Monster Moto Shield
Retired
No product available!
Module with a single-channel driver of DC motors VNH2SP30. It allows you to control a DC motor with a supply voltage of up to 16 V and a current consumption of up to 30 A. Mini Monster Moto Driver
Retired
No product available!
No product available!
3D stereo camera module, which was built of two cameras with OV9281 sensor. Designed to work with Raspberry Pi, Jetson Nano and Xavier NX. ArduCAM B0263
Retired
No product available!
The camera set with the AR1335 sensor allows you to control zoom. Works with Raspberry Pi minicomputers. The camera is equipped with a matrix with a resolution of 13 MPx. ArduCAM B016713MP
Retired
No product available!
Retro wireless controller with built-in Bluetooth 4.0 module and USB type C output. SparkFun WIG-17264
Retired
No product available!
ROSA3D filament made of high quality PVB. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PVB Smooth Green Transparent