- Out-of-Stock
Filament ROSA3D PLA-Silk 1.75mm Copper
ID: 588217
5907753131904
ROSA3D filament made of high-quality PLA-Silk granules characterized by intense color and exceptional gloss. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. Filament ROSA3D PLA-Silk Copper
Description
1.75 mm PLA-Silk filament for 3D printing by ROSA3D. 0.8 kg of filament is wound on the spool. The recommended printing temperature is in the range from 185°C to 225°C, and the bed temperature during printing in the range of 40°C - 60°C, however, when using adhesives, heating the bed is not necessary.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. Filament PLA Starter from Rosa3D was designed for beginner users of 3D printers. The simplicity of PLA Starter printing will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects.
PLA-Silk is a durable and easy-to-use filament characterized by intense color and exceptional gloss. It is characterized by low shrinkage and no unpleasant odor. The prints are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a mixture of plastics based on the biodegradable PLA biopolymer. It was made only of ingredients approved for contact with food. PLA-Silk can be printed with the same settings as PLA Starter. There is no need to slow down the printing speed. The filament is shiny already on the spool, the gloss does not only arise during printing, so it allows quite a lot of freedom in choosing the temperature. Nevertheless, we always recommend that you print the temperature tower first.
Features
- Color: Copper
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +0.02 mm
- Printing temperature: 185°C to 225°C
- Bed temperature: 40°C to 60°C (when using washers or other means to increase the adhesion heating of the table is not required)
- Density 1.24 g/cm3
- Odorless smell
- Elongation at tensile 6%
- Tensile strength (to break) 53 MPa
- Modulus of elasticity at tensile 3500 MPa
- Heat deformation temperature 55°C
- Net weight: 0.8 kg
588217
Data sheet
- Rodzaj filamentu
- PLA
- Ilość filamentu
- 0,8 kg
- Diameter
- 1,75 mm
- Colour
- Brązowy
You might also like
Easy PLA filament in inox, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Inox
zł85.01
24h
Available quantity: 2
Available
Easy PLA filament in Vertigo, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Vertigo
zł85.01
24h
Available quantity: 1
Available
Filament by PlastSpaw with an excellent quality-price ratio. Made of high-quality PLA granules. 1 kg of filament with a diameter of 1.75 mm is wound on the spool
zł35.90
24h
Available quantity: 56
Available
Filament by PlastSpaw with an excellent quality-price ratio. Made of high-quality PLA granules. 1 kg of filament with a diameter of 1.75 mm is wound on the spool
zł48.90
24h
Available quantity: 1
Available
3D printer with a filament sensor and colorful LED backlight. For self-assembly, included with the necessary accessories. BIQU B1
Regular pricezł1,099.01zł639.60
24h
Available quantity: 5
Available
Other products in the same category (16)
No product available!
No product available!
No product available!
Minicomputer equipped with SoC Rockchip RK3399 (ARM Cortex-A72 / ARM Cortex-A53). The computer has been well-equipped, including in the Gigabit Ethernet interface, mSATA interface, miniPCIe connector, USB type C, dual CSI interface, etc. On the board you can run Android 6.0 and Linux
Retired
No product available!
Paul Horowitz, Winfield Hill, WKiŁ Publishing House
Retired
No product available!
No product available!
iPazzPort KP-810-19S is a miniature wireless keyboard for 2.4 GHz band with built-in touchpad. Designed specifically to work with Smart TVs and PCs. Can also be used with Raspberry Pi. KP-810-19S
Retired
No product available!
The Multi-Touch Display Shield is a gorgeous 2.8“ touchscreen display with a powerful on-board microcontroller that performs graphics processing tasks. The display is a capacitive touchscreen with QVGA resolution (320×240) and 2 finger multi-touch support. Digilent 410-317
Retired
No product available!
A miniature module that allows you to control devices using a button, without connecting them with wires
Retired
No product available!
μRemote PRO in a black metal housing is a fourth generation pilot for controlling all devices in the home and garden. Configurable from the application, loaded like a smartphone
Retired
No product available!
SparkFun Variable Load Kit is a self-assembly set, used to determine the current drawn from a given power source. This module can be used to test power stability at various loads, battery life tests etc. It can test voltage up to 30 V and generate load from several mA to 4 A. SparkFun KIT-14449
Retired
No product available!
Board with a 32-bit Nuvoton NUC123ZD4AN0 microcontroller with an ARM Cortex-M0 core, the user has 31 I / O lines, 6 analog inputs and UART, SPI, I2S and I2C interfaces. Compatible with Arduino. DFRobot DFR0392
Retired
No product available!
Module with 4-channel DC motor driver (2 x TB6612FNG) designed for FireBeetle boards. It communicates via the I2C interface. DFRobot DFR0508
Retired
No product available!
Development board with the PSoC5LP ARM Cortex system. Equipped with two processors: the CY8C5868LTI-LP039 debugger / programmer and the system supporting the application code CY8C5888AXI-LP096. Both processors are based on the Cortex-M3 core and have 256kB flash memory, 64kB SRAM and 2kB EEPROM. Sparkfun DEV-13714
Retired
No product available!
A single board computer based on the Intel Celeron N3160 quad-core processor. It combines the ability to run software for PCs and Arduino. SB02-3740-0000-C0
Delivery date unknown
No product available!
OpenMV M7 is a small PCB with an OV7725 camera and a STM32F765VI microcontroller. The module allows easy implementations in devices / robots where there is a need for image processing (including face detection, color recognition, or reading QR codes). SparkFun SEN-15325
Retired
No product available!
ROSA3D filament made of high-quality PLA-Silk granules characterized by intense color and exceptional gloss. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. Filament ROSA3D PLA-Silk Copper