![Zestaw tagów UHF RFID (5 szt) Zestaw tagów UHF RFID (5 szt)](https://kamami.pl/29190-large_default/uhf-rfid-tag-set-of-5.jpg)
![Zestaw tagów UHF RFID (5 szt) Zestaw tagów UHF RFID (5 szt)](https://kamami.pl/29190-large_default/uhf-rfid-tag-set-of-5.jpg)
zł8.71 tax excl.
WRL-14147
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Ever wanted to play with those newfangled RFID tags? Although it’s been around for a while, the technology has been extremely cost-prohibitive and difficult to implement without being an RF engineer. This affordable product opens the door for using RFID in your own projects!
These paper-thin EPCglobal Gen2 tags work with our Simultaneous RFID reader. The tags can read and be written to — and also have a kill feature. Each tag comes with a TID (Truly Unique ID) that can’t be changed, but there’s plenty of memory for you to write and read from.
Adapter for RFID reader (125 kHz). Works with ID-3LA, ID-12LA and ID-20LA series systems. SparkFun SEN-13030
Adafruit 789 - Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras
Module with RFID reader designed to work with micro:bit. It is equipped with a buzzer and can control two modeling servos. SB Components 21291
The module for the RFID reader (125 kHz) is equipped with a USB interface. Works with ID-3LA, ID-12LA and ID-20LA series systems. The selected RFID reader is simply plugged into the module\'s connectors. SparkFun SEN-09963
Intelligent RFID identifier cooperating with iNode Control Point
The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. These can be read by almost any 13.56MHz RFID/NFC reader. Adafruit 360
Demo kit for prototyping applications and devices based on NFC ST25DV64KC tags. STMicroelectronics ST25DV64KC-DISCO
The ID-20LA RFID reader from ID Innovations has an operating frequency of 125 kHz. It has a built-in antenna and pins with 2 mm spacing. Among other things, it is designed to work with the RFID USB Reader module. SparkFun SEN-11828
No product available!
KAmodNFC is an expansion board with M24LR64E-R chip – dynamic tag with 64kb EEPROM memory and dual communication interface (I2C/RF). On board is placed also signalization of energy harvesting function, which is in M24LR64E-R chip embedded.
A NFC-compatible Raspberry Pi expansion kit with integrated antent. It has the ability to work in reader mode, P2P
and card emulation mode. NXP PN7150
A set of RFID tags consisting of three key rings in different colors and two white cards. The tags operate at 125 kHz and comply with the EM4100 standard. Seeed Studio 110990035
Intelligent RFID identifier cooperating with iNode Control Point
The RFID / NFC transponder reader module (tags) works in the PN532 chip and is compatible with Arduino. Data is available via SPI, I2C or HSU (High Speed UART). Supplied with a RFID card and key ring. ELECHOUSE NFC MODULE V3
RFID identification key with dimensions of 40.5 mm x 32 mm x 4.2 mm, operating on the 13.56 MHz frequency. RFID Tag Key
The dynamic NFC / RFID tag with I2C bus and ISO 15693 RF interface in the SOIC8 housing has a built-in 64k EEPROM memory. Producer: STMicroelectronics
WRL-14147