![Side view Side view](https://kamami.pl/47325-large_default/sensoilnitrogen.jpg)
![Side view Side view](https://kamami.pl/47325-large_default/sensoilnitrogen.jpg)
zł227.79 tax excl.
Sensor dedicated to the measurement of nitrogen content in the soil. Allows you to monitor and analyze the level of the element in the soil, and thus optimize fertilization and improve cultivation processes
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Sensor dedicated to the measurement of nitrogen content in the soil. It allows you to monitor and analyze the level of the element in the soil, and thus optimize fertilization and improve cultivation processes. The sensor is powered over a wide range of voltages from 10 to 30 V. It has an analog output ranging from 0 to 10 V through which it provides precise information about the level of nitrogen in the soil. The analog signal allows the sensor to be connected to many types of receivers, such as microcontrollers, monitoring systems or computers, which facilitates the integration of the sensor in various applications. The measurement is made using a metal measuring probe with three pointed ends and ensures long-term operation in various weather and soil conditions.
Capacitive soil humidity sensor with I2C interface powered by 3-5V. Adafruit 4026
Soil moisture sensor with analog output. The module comes with a probe with metal tips.
The arduino turbidity sensor detects water quality by measuring level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. SEN0189
Laser distance sensor with a measuring range of up to 4 m based on the ToF measurement technique. Communication with the module takes place via the I2C interface. Pimoroni PIM373
The Pololu MinIMU-9 v5 is an inertial measurement unit (IMU) that packs an LSM6DS33 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board.
Module with 3 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4443
Module with MLX90640 thermal imaging camera with a matrix of 32x24 fields and a viewing angle of 55°. The board is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 4407
Module with a light sensor (photoresistor) designed for M5Stack sets. An analog output and a digital output have been led out on the Grove connector. M5Stack U021
Module with 6 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4406
The MQ-4 sensor allows methane concentration measurement. The measuring range of the sensor reaches up to 10,000 ppm and an analogue signal is obtained at the output.
ToF distance sensor module based on the VL53L1X system. It offers a range from 4 to 400 cm and communicates via the I2C interface. TOF400C
Non-contact water turbidity sensor. It is capable of detecting the light transmittance and scattering coefficient of liquids in transparent cylindrical containers from 40 to 50 mm in diameter. It communicates via a UART interface. DFRobot SEN0554
The GY-87 module is composed of a module with MPU6050, QMC5883L and BMP180 sensors, allowing the measurement of traffic in nine axes and the measurement of atmospheric pressure. The module has a built-in 3.3 V voltage stabilizer
Module with a 3-axis motion sensor MSA301 (accelerometer), which allows to measure acceleration in the range of ±2/±4/±8/±16 g. Communicates via the I2C bus. Pimoroni PIM456
Module with PIR motion sensor SR-602. It can detect movement up to 5 meters
The current measurement of 0 - 30A is carried out by the ACS712-30 system based on the Hall effect. The sensitivity of the system is 66mV / A (analog signal).
No product available!
Module with ITR9909 proximity sensor that can detect the presence of objects in the range from 9 to 30 cm. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020175
The SST Liquid Level Sensor provides single point liquid detection via a TTL compatible push/pull output. This optical liquid level sensor features a miniature design that allows for installation in areas where space is limited. SEN-13835
Sensor dedicated to the measurement of nitrogen content in the soil. Allows you to monitor and analyze the level of the element in the soil, and thus optimize fertilization and improve cultivation processes