modGY-87 - 10DoF module with accelerometer, gyroscope, magnetometer and barometer
ID: 565671
5906623456154
zł31.03
Tax included
zł25.23 tax excl.
The GY-87 module is composed of a module with MPU6050, QMC5883L and BMP180 sensors, allowing the measurement of traffic in nine axes and the measurement of atmospheric pressure. The module has a built-in 3.3 V voltage stabilizer
Description
The GY-87 module is composed of a module with MPU6050, QMC5883L and BMP180 sensors, allowing the measurement of traffic in nine axes and the measurement of atmospheric pressure. The module has a built-in voltage stabilizer of 3.3 V. All sensors in the module communicate with the target device by means of the I2C bus. On the outside of the module, apart from the power supply and SDA / SCL signals, interrupt, standby and synchronization signals were also output. The set includes pin connectors for soldering - straight and angled.
properties
- Module 10 DoF (Degrees of Freedom)
- Built-in accelerometer and MPU6050 gyroscope
- Built-in magnetometer QMC5883L
- Built-in BMP180 pressure sensor
- Communication bus: I2C
- Additional output signals: readiness, interruption, synchronization
- Dimensions 22 x 17 x 4 mm
- Weight: 6 g
Included
- Straight 1x8 connector for self-assembly
- 1x8 angled connector for self-assembly
565671
Data sheet
- Interface
- I2C
- Type of sensor
- MPU6050
- Module type
- 10DoF
- Power supply voltage
- 3,3 V
- Sensor type
- Akcelerometr, żyroskop, magnetometr i barometr
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pressure sensor module with I2C interface (MPL115A2)
zł44.90
24h
Available quantity: 19
Available
Motion Processing Unit, 3-Axis Gyro + 3-Axis Accel MEMS MotionTracking™ Device, I2C, InvenSense, RoHS
zł23.69
Delivery date unknown
No product available!
KA-NUCLEO-F411CE v2 is a development board based on the STM32F411CE microcontroller. It has a built-in programmer compatible with ST-Link / v2-1, it is possible to program and debug the microcontroller via the USB connector.
zł89.90
24h
Available quantity: 162
Available
Module with a 3-axis magnetometer BMM150. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020492
zł53.46
24h
Available quantity: 1
Available
Versatile development board with the ATmega328P microcontroller, which, thanks to its compatibility with Arduino UNO and variety of functions, is an excellent choice for many projects
zł49.72
24h
Available quantity: 139
Available
Other products in the same category (16)
A module with an acceleration and rotational speed sensor based on the LSM6DSOX system and the LIS3MDL magnetometer. Equipped with a STEMMA QT connector, it communicates via the I2C, SPI or I3C interface. Adafruit 4517
zł113.52
24h
Available quantity: 1
Available
BMI270 3-axis accelerometer and gyroscope module. The chip is a low-power IMU optimised for wearables, providing precise acceleration measurement, angular velocity measurement and motion-triggered interrupt functions. Equipped with a Qwiic connector, it communicates via an I2C interface. SparkFun SEN-22398
zł82.99
24h
Available quantity: 1
Available
Module with 9-axis IMU ICM-20948 sensor (3-axis accelerometer, gyroscope and magnetometer and DMP) and BMP280 pressure sensor. Communication via I2C. Waveshare 10 DOF IMU Sensor (D)
zł434.98
4 weeks
No product available!
Module with 9-axis IMU ICM-20948 sensor. The chip is an integrated 3-axis accelerometer, gyroscope and magnetometer and a digital motion processor DMP (Digital Motion Processor). Communication via I2C or SPI. SparkFun SEN-15335
zł112.84
24h
Available quantity: 4
Available
10 DoF module with ADXL345 accelerometer, HMC5883L magnetometer, ITG-3205 gyroscope and BMP280 barometer. Communication via the I2C interface. DFRobot SEN0140
zł59.04
24h
Available quantity: 4
Available
Module with 6-axis IMU sensor MPU6886, which combines a 3-axis accelerometer and a 3-axis gyroscope. M5Stack U095
zł42.00
24h
Available quantity: 3
Available
A module with an acceleration and rotational speed sensor based on the LSM6DS3TR-C system and the LIS3MDL magnetometer. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 5543
zł103.31
24h
Available quantity: 3
Available
Accelerometer and gyroscope module, allows measurement of acceleration in the range of +/- 16 G and angular velocity in the range up to +/- 2000 dps. modMPU6500 (GY-6500)
zł10.41
4 weeks
No product available!
Module with 9-axis IMU sensor BNO055. It has a built-in processing chip that returns orientation in 3D space. Communicates via I2C. Adafruit 4646
zł161.55
24h
Available quantity: 6
Available
Module with 9-axis IMU BMX160 sensor (accelerometer, gyroscope and magnetomet) and BMP388 pressure/temperature sensor. Communication via the I2C interface. DFRobot SEN0252
zł99.30
24h
Available quantity: 1
Available
Module with 3-axis accelerometer and ISM330DHCX gyroscope. Equipped with a Qwiic connector, it communicates via the I2C interface. SparkFun SEN-20176
zł202.72
3 weeks
No product available!
The LSM6DS33 combines a digital 3-axis accelerometer and 3-axis gyroscope into a single package. The sensor provides six independent acceleration and rotation rate readings whose sensitivities can be set in the ranges of ±2 g to ±16 g and ±125°/s to ±2000°/s, available through I²C and SPI interfaces.
zł72.02
24h
Available quantity: 1
Available
The Digilent Pmod NAV uses the LSM9DS1 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer, plus the LPS25HB digital barometer to provide users with 10-DOF functionality. Digilent 410-326
zł262.11
3 weeks
No product available!
Module with 6-axis IMU sensor that allows you to measure acceleration and rotational speed in the range up to ±16g and ±2000dps. Equipped with a STEMMA QT connector, it communicates via I2C or SPI. Adafruit 4503
zł50.04
24h
Available quantity: 5
Available
The module with the ADIS16470 chip, which combines a 3-axis accelerometer and a gyroscope. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020672
zł1,941.11
4 weeks
No product available!
GY-801 is a 9DOF IMU module with L3G4200D, ADXL345, MMC5883MA and BMP180 systems. It allows you to measure the movement of the object and atmospheric pressure.
zł128.01
4 weeks
No product available!
The GY-87 module is composed of a module with MPU6050, QMC5883L and BMP180 sensors, allowing the measurement of traffic in nine axes and the measurement of atmospheric pressure. The module has a built-in 3.3 V voltage stabilizer