STEMMA QT ISM330DHCX 6 DoF IMU - module with 3-axis accelerometer and gyroscope
ID: 587243
5906623430208
zł103.74
Tax included
zł84.34 tax excl.
Module with 3-axis accelerometer and ISM330DHCX gyroscope. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4502
Description
Module with a 3-axis accelerometer and an industrial-grade ISM330DHCX gyroscope. It has a user selectable measuring range of ±2g/±4g/±8g/±16g for the accelerometer and ±125/±250/±500/±1000/±2000/±4000 dps for the gyro. It is able to measure accelerations with a data rate of 12.5 Hz to 6.7 kHz and angular velocity with a frequency of 1.6 Hz to 6.7 kHz. The sensor is equipped with a calibration and compensation circuit which ensures excellent performance over a wide temperature range from -40 to + 105 ° C. It is supplied with the voltage from 3.3 V to 5 V, and communication takes place via the I2C interface (STEMMA QT connector) or SPI. Full documentation and examples of use are available on the product page.
Features
- Accelerometer measuring scale: ±2g/±4g/±8g/±16g
- Gyro measurement scale: ±125/±250/±500/±1000/±2000/±4000 dps
- 16 bit data output
- I2 or SPI interface
- Data transmission frequency: from 12.5 Hz to 6.7 kHz for the accelerometer and from 1.6 Hz to 6.7 kHz for the gyroscope
- Working voltage: 3.3V or 5V
- Included
- STEMMA QT ISM330DHCX 6 DoF IMU
- 14-pin goldpin male connector
587243
Data sheet
- Interface
- SPI/I2C
- Type of sensor
- inny
- Module type
- 6DoF
- Power supply voltage
- 3,3 - 5 V
- Sensor type
- Akcelerometr i żyroskop
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
No product available!
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.31
24h
Available quantity: 3
Available
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.31
24h
Available quantity: 166
Available
Flexible Qwiic cable, 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single female goldpin connectors. SparkFun PRT-17261
zł12.21
24h
Available quantity: 9
Available
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
zł12.44
24h
Available quantity: 10
Available
The board is equipped with a STM32F405 microcontroller with an ARM Cortex-M4 core and SPI Flash memory, GPIO pins, a connector for connecting a battery with a charging circuit and a STEMMA QT socket. Adafruit 4382
zł217.59
24h
Available quantity: 1
Available
Other products in the same category (16)
The GY-87 module is composed of a module with MPU6050, QMC5883L and BMP180 sensors, allowing the measurement of traffic in nine axes and the measurement of atmospheric pressure. The module has a built-in 3.3 V voltage stabilizer
zł31.03
24h
Available quantity: 46
Available
Module with LSM6DS3 sensor that combines a 3-axis accelerometer and a 3-axis gyroscope. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 105020012
zł60.54
24h
Available quantity: 1
Available
Module with acceleration and rotational speed sensor based on the LSM6DSOX system. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4438
zł61.94
24h
Available quantity: 3
Available
Versatile 9DOF sensor with accelerometer, magnetometer and gyroscope, supporting I²C and SPI interfaces, enabling precise measurement of motion, orientation and temperature, with easy integration with Arduino and microcontrollers. Adafruit 3387
zł115.28
24h
Available quantity: 1
Available
Module with 9-axis IMU. It combines the ISM330DHCX (accelerometer and gyroscope) and MMC5983MA (magnetometer) systems. Communication via the I2C interface. SparkFun SEN-19895
zł220.29
24h
Available quantity: 1
Available
Module with 3-axis accelerometer and gyroscope LSM6DSV16X. The chip is a low-power IMU optimized for IoT devices with data processing capabilities using machine learning. Equipped with a Qwiic connector, it communicates via the I2C interface. SparkFun SEN-21336
zł95.10
24h
Available quantity: 1
Available
A module with an acceleration and rotational speed sensor based on the ICG-20660L system. It communicates via the I2C or SPI interface. DFRobot SEN0443
zł114.13
24h
Available quantity: 3
Available
Module with acceleration and rotational speed sensor based on the MPU6050 system. It communicates via the I2C or UART interface
zł50.57
24h
Available quantity: 2
Available
Module with 9-axis IMU ICM-20948 sensor. The system is an integrated 3-axis accelerometer, gyroscope and magnetometer and a digital motion processor DMP. Communication via I2C or SPI. Adafruit 4554
zł78.45
24h
Available quantity: 5
Available
Module with a 9-axis IMU sensor, which combines an accelerometer and a gyroscope (ICM20600 system) and a magnetometer (AK09918 system). The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020585
zł58.36
4 weeks
No product available!
6DoF module with MPU6050 (3-axis accelerometer, 3-axis gyroscope) powered with 3-5V. I2C communication interface
zł12.25
24h
Available quantity: 9
Available
KAmodLSM6DS3 is a module that allows measurement of acceleration and angular velocity values. It has a built-in voltage stabilizer and level translators on SDA / SCL lines, thanks to which it can be used in 2.5-5.5V voltage systems
zł27.48
24h
Available quantity: 129
Available
GY-9250 is a 9 Degrees of Freedom (9DoF) module with the InvenSense MPU-9250 chip. It has a built-in gyroscope, accelerometer and magnetometer.
zł35.17
4 weeks
No product available!
Module with 9-axis IMU ICM-20948 sensor (3-axis accelerometer, gyroscope and magnetometer and DMP) and BMP280 pressure sensor. Communication via I2C. Waveshare 10 DOF IMU Sensor (D)
zł434.98
4 weeks
No product available!
KAmodLSM303C is a module with the MEMS LSM303C chip from STMicroelectronics. The chip has a digital signal output (I2C or SPI bus) and allows measurement of accelerations and magnetic field values in three axes
zł37.90
24h
Available quantity: 406
Available
Module with 6-axis IMU sensor that allows you to measure acceleration and rotational speed in the range up to ±16g and ±2000dps. Equipped with a STEMMA QT connector, it communicates via I2C or SPI. Adafruit 4503
zł50.04
24h
Available quantity: 5
Available
Module with 3-axis accelerometer and ISM330DHCX gyroscope. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4502