QTRX-MD-03A - module with 3 reflectance sensor with analog output
ID: 572741
5906623479283
zł31.01
Tax included
zł25.21 tax excl.
Module with 3 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4443
Description
Reflectance sensor consisting of array 3 QTRX optocouplers with the ability to individually control the brightness of each of the infrared LEDs. The sensors on the board are medium density (MD) and the distance between them is 8 mm. The module can be supplied with the voltage ranging from 2.9 V to 5.5 V and draws current up to 9 mA. The optimum distance from the sensor to the ground is 10 mm and the maximum distance is 30 mm. The module is ideally suited for detecting changes in light reflection, so it can be used for edge detection or line tracking in linefollower robots.
Features
- Sensor type: QTRX
- Number of sensors:3
- Sensor pitch: 8 mm (distance between individual sensors)
- Full brightness LED current: 3,5 mA (regardless of the supply voltage)
- Maximum module current: 9 mA
- Output signal: analog signal (0 V to VCC)
- Optimum sensing distance: 5 mm
- Maximum sensing distance: 30 mm
- Supply voltage: 2.9 ... 5.5 V
- Dimensions: 21,0 × 20,0 × 3,0 mm
- Weight: 1,1 g
572741
Data sheet
- Type of sensor
- QTRX
- Output type
- analog
- Number of sensors
- 3
- Power supply voltage
- 2,9 - 5,5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
DRV8835 Dual Motor Driver Carrier
zł23.90
24h
Available quantity: 10
Available
Aluminum platform for building a mobile robot. Numerous holes were made in the plate to facilitate the assembly of motors and electronics. The set is equipped with 4 TT motors and 4 Mecanum multidirectional wheels with a diameter of 60 mm
zł93.85
Delivery date unknown
No product available!
Other products in the same category (16)
Module with 3 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4243
zł16.76
24h
Available quantity: 2
Available
Module with 1 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4401
zł16.16
24h
Available quantity: 3
Available
Module with 5 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4345
zł49.68
24h
Available quantity: 1
Available
No product available!
Module with 7 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4347
zł64.92
24h
Available quantity: 1
Available
A compact line-tracing board designed for Raspberry Pi Pico, BBC micro:bit, and Arduino projects. Equipped with three phototransistors, it generates an analog output voltage proportional to the substrate\'s color, enabling precise control of autonomous vehicles. The board is solderless and ready to use, with a standard 2.54mm connector for easy integration with prototype breadboards. Kitronik 5337
zł20.93
24h
Available quantity: 2
Available
This IR LED/phototransistor pair is great for precisely identifying changes in reflectance. In general, the closer the object, the higher the contrast between light and dark readings, but high-reflectance objects are generally detectable out to around 80 mm.
zł16.08
4 weeks
No product available!
This micro:bit module allows for light and object detection and line tracking, making it ideal for educational and robotic projects. Equipped with three phototransistors, it provides precise measurements, and the analog signal transmitted to the micro:bit allows for precise analysis of the surroundings. The board can be connected directly to the micro:bit or via alligator clips. Kitronik 5678
zł24.39
24h
Available quantity: 2
Available
Module with 16 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4356
zł142.59
24h
Available quantity: 1
Available
Module with 7 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4247
zł39.99
24h
Available quantity: 1
Available
Module with 6 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4406
zł67.22
24h
Available quantity: 3
Available
Module with 9 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4109
zł47.98
24h
Available quantity: 1
Available
Module with 7 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4207
zł38.87
24h
Available quantity: 1
Available
Module with 6 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4246
zł32.36
24h
Available quantity: 1
Available
Infrared sensor module with TCRT5000. Can be used to detect objects in close proximity or detect lines in "Line Follower" robots
zł2.16
24h
Available quantity: 8
Available
Module with 4 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4344
zł37.72
24h
Available quantity: 1
Available
Module with 3 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4443