

The MicroMod Input and Display Carrier Board is an expansion board designed for MicroMod main modules. It is equipped with a 2.4 "TFT LCD display, 6 addressable LEDs, a 5-position joystick and two function buttons that are connected to the ATtiny84 microcontroller. The board has a USB type C socket, which can be used both for power supply, system programming and The module with the processor is plugged into the M.2 connector. In addition, the board has a backup battery for the RTC and buttons (Reset and Boot). For more advanced users, SWD pins have been introduced to allow the full use of the set's capabilities. There is a tutorial with sample programs to help you get started with the kit.
MicroMod is an interface ecosystem that connects the main module to the processor or the microcontroller to various peripherals through expansion boards. Using the M.2 standard, MicroMod allows easy replacement of main modules.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The popular micro SDHC format, used in smartphones, tablets and cameras. Class 10 product with a UHS-I interface from Goodram. Reading speed: up to 60 MB / s, write: up to 15 MB / s
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
MicroMod main module equipped with Bluetooth 5.0 Sparkfun Artemis. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-16401
MicroMod main module with ESP32 chip. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun WRL-16781
MicroMod main module with SAMD51 microcontroller. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-16791
MicroMod main module with RP2040 microcontroller. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-17720
MicroMod main module with iMXRT1062 microcontroller. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-16402
Set of M.2 connectors for MicoMod modules. Necessary when designing your own expansion board. SparkFun KIT-16549
Extension board designed for MicroMod processor modules. All the pins are led out to connectors with a pitch of 2.54 mm. SparkFun DEV-16885
MicroMod main module with ESP32 chip. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun WRL-16781
The MicroMod main module with the STM32WB5MMG microcontroller, which allows communication under the Bluetooth Low Energy 5.3, Zigbee and OpenThread protocols. It is equipped with an M.2 connector and can work with MicroMod expansion boards. SparkFun DEV-21438
Function module designed for MicroMod boards. It allows you to add Ethernet communication with PoE function based on the W5500 chip to the project. SparkFun COM-18708
An expansion board designed for MicroMod main modules. It is equipped with a Qwiic connector and one place for attaching function modules. SparkFun DEV-20748
No product available!
MicroMod main module with STM32 microcontroller. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SparkFun DEV-17713
Function module designed for MicroMod boards. It allows you to add WiFi wireless communication based on the ESP32 chip to the project. SparkFun WRL-18430
The USB-UART converter is designed to work with the MicroMod Asset Tracker board. It facilitates direct communication with the SARA-R510M8S u-blox module. SparkFun DEV-17725
No product available!
Function module designed for MicroMod boards. Allows CAN network communication to be added to the design. SparkFun SPX-21775
Extension board designed for MicroMod main modules. Connects to a display or TV via HDMI. SparkFun SPX-17718
An expansion board designed for MicroMod main modules. Equipped with the LTE-M / NB-IoT u-blox SARA-R510M8S module. It allows you to monitor devices remotely. SparkFun DEV-17272
No product available!
MicroMod main module equipped with Bluetooth 5.0 Sparkfun Artemis. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-16401
Function module designed for MicroMod boards. It allows you to add WiFi wireless communication based on the DA16200 chip to the project. SparkFun WRL-18594
Extension board designed for MicroMod main modules. Equipped with LCD TFT 2,4", LED and buttons. SparkFun DEV-16985