• New
Main view
search
  • Main view
ID: 1207299
5902560999631
zł359.00
Tax included

zł291.87 tax excl.

Water-soluble Fiberlogy BVOH support filament in Natural, with a 1.75mm diameter and 0.50kg net weight, designed for multi-material FFF/FDM printing. The material adheres to PLA, ABS, PET-G and ASA and enables removable support structures for complex geometries and moving mechanisms. Fiberlogy 3S-BVOH-NATURAL-050-175

24h
Available
Available quantity: 1

Description

Fiberlogy BVOH Natural 1.75mm 0.50kg support filament is designed for multi-material FFF/FDM printing of complex models, internal channels, moving mechanisms and geometries requiring support structures that are difficult to remove mechanically. BVOH dissolves in water, allowing support material to be removed by immersing the finished print in warm water without breaking the supports away manually.

The material provides good adhesion to commonly used printing filaments including PLA, ABS, PET-G and ASA. Water-soluble supports can therefore be used for models requiring clean surfaces in support contact areas. The material is particularly useful for complex details, enclosed spaces and components where conventional support removal would be difficult.

The recommended printing temperature is 190–220°C, with a bed temperature of 60°C. Suitable build surfaces include smooth PEI, textured PEI and glass. An enclosed chamber is not required, while recommended cooling is 75–100%. Recommended drying conditions are 50°C for 4h.

BVOH is hygroscopic and should therefore be stored in a dry environment protected from moisture. Material density is 1.14g/cm³, Vicat softening temperature reaches 92°C and glass transition temperature is 68°C. Tensile strength at break reaches 45MPa, while flexural strength is 71MPa. The 0.50kg variant is supplied on the new spool system compatible with BambuLab AMS.

Features

Basic parameters

  • Brand: Fiberlogy
  • Series: BVOH
  • Color: Natural
  • Material type: water-soluble support filament
  • Printing technology: FFF/FDM
  • Filament diameter: 1.75mm
  • Net weight: 0.50kg
  • Package type: spool
  • New spool system
  • Compatible with BambuLab AMS
  • Compatible materials: PLA, ABS, PET-G, ASA

Printing parameters

  • Printing temperature: 190–220°C
  • Bed temperature: 60°C
  • Build surface: smooth PEI, textured PEI, glass
  • Drying conditions: 50°C / 4h
  • Enclosed chamber: not required
  • Cooling fan: 75–100%

Mechanical properties

  • Density: 1.14g/cm³
  • Tensile strength at break: 45MPa (ISO 527)
  • Flexural strength: 71MPa (ISO 178)
  • Flexural modulus: 2900MPa (ISO 178)
  • Elongation at break: 9% (ISO 527)

Thermal properties

  • Vicat softening temperature: 92°C (ISO 306)
  • Glass transition temperature: 68°C (DSC)
1207299

Data sheet

Rodzaj filamentu
BVOH
Ilość filamentu
0,5 kg
Diameter
1,75 mm
Colour
Naturalny
Type of packaging
Spool

Manufacturer

Responsible person

Other products in the same category (16)