Step-Down Regulator APM81815 12V 0.8A - Pololu 5269
ID: 1203000
5902186335554
zł25.14
Tax included
zł20.44 tax excl.
Step-down voltage regulator module based on the APM81815 providing a fixed 12 V output at up to 0.8 A with an input voltage range of 12.1 - 72 V. Pololu 5269
Description
The Pololu 5269 is based on the APM81815 synchronous buck regulator and enables step-down conversion from an input voltage range of 12.1 - 72 V to a stable 12 V output. The design uses an Allegro MicroSystems IC intended for demanding industrial and automotive applications, including systems powered from 48 V supply rails.
The regulator operates at an internally set switching frequency of 2.15 MHz and features low quiescent current and integrated power-stage components, simplifying PCB layout and reducing EMI emissions. The module supports continuous output current up to 0.8 A. Integrated protection features include undervoltage lockout (UVLO), cycle-by-cycle current limiting, short-circuit protection, output overvoltage and undervoltage protection, and thermal shutdown. The PGOOD output allows monitoring of the output voltage status.
Features
- Integrated circuit: APM81815
- Converter type: Synchronous step-down (buck)
- Input voltage: 12.1 - 72 V
- Output voltage: 12 V
- Maximum continuous output current: 0.8 A
- Output type: Fixed 12 V
- Switching frequency: 2.15 MHz
- Maximum quiescent current: 3 mA
- No reverse voltage protection
- Cycle-by-cycle overcurrent protection
- Output short-circuit protection
- Output overvoltage and undervoltage protection
- Thermal shutdown protection
- PGOOD open-drain status output
- Dimensions: 10.16 x 19.05 x 3.3 mm
- Weight: 1.0 g
1203000
Data sheet
- Output voltage
- 12V
- Output current
- 0,8 A
- Converter type
- Step-down
- Supply voltage min
- 12,1 V
- Supply voltages max
- 72 V
- APM81815 datasheet (1,48 MB)
- Dimension diagram of the APM81815 Step-Down Voltage Regulator Carrier (292,29 kB)
- 3D model of the APM81815 Step-Down Voltage Regulator Carrier (3,3 MB)
- Drill guide for the APM81815 Step-Down Voltage Regulator Carrier (11,95 kB)
- Typical dropout voltage 12V - jpg (71,20 kB)
- Quiescent current - jpg (108,39 kB)
- Maximum continuous output current - jpg (98,12 kB)
- Typical efficiency - jpg (81,12 kB)
- Schematic - png (40,85 kB)
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 80% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł101.88
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 6 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł88.84
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 7.5 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł91.16
24h
Available quantity: 2
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 9 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł86.59
4 weeks
No product available!
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V with an available output current of around 9 A.
zł138.88
24h
Available quantity: 1
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board measures only 0.7″ × 0.8″, but it allows a typical continuous output current of up to 5 A. Typical efficiencies of 85% to 95% make this regulator well suited for high-power applications like powering motors or servos.
zł117.07
24h
Available quantity: 4
Available
Step-Down Voltage Regulator D24V25F5. Pololu 2850
zł82.64
4 weeks
No product available!
The compact (0.4″ × 0.5″) D24V5F15 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 15 V while allowing for a maximum output current of 500 mA. Pololu 2847
zł35.76
24h
Available quantity: 1
Available
The compact (0.4″ × 0.5″) D24V5F12 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V while allowing for a maximum output current of 500 mA.
zł34.02
24h
Available quantity: 2
Available
The compact (0.4″ × 0.5″) D24V5F9 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 9 V while allowing for a maximum output current of 500 mA. Pololu 2845
zł35.60
4 weeks
No product available!
The compact (0.4″ × 0.5″) D24V5F6 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 6 V while allowing for a maximum output current of 500 mA. Pololu 2844
zł31.45
24h
Available quantity: 6
Available
The compact (0.4″ × 0.5″) D24V5F5 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 5 V while allowing for a maximum output current of 500 mA. Pololu 2843
zł30.44
24h
Available quantity: 7
Available
The compact (0.4″ × 0.5″) D24V5F2 synchronous buck voltage regulator takes input voltages between 3 V and 36 V and efficiently reduces them to 2.5 V while allowing for a maximum output current of 500 mA. This regulator offers typical efficiencies between 80% and 90%. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
zł35.08
4 weeks
No product available!
The compact (0.4″ × 0.5″) D24V5F1 synchronous buck voltage regulator takes input voltages between 3 V and 36 V and efficiently reduces them to 1.8 V while allowing for a maximum output current of 500 mA. This regulator offers typical efficiencies between 75% and 90%. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
zł35.09
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage from 4 V to 36 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.6 A and features reverse voltage protection.
zł82.07
24h
Available quantity: 2
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36V and efficiently reduces it to 5V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.5A and features reverse voltage protection. Pololu 2858
zł75.30
24h
Available quantity: 3
Available
Step-down voltage regulator module based on the APM81815 providing a fixed 12 V output at up to 0.8 A with an input voltage range of 12.1 - 72 V. Pololu 5269