Round LCD IPS module 1.28" 240x240 with touch panel - Waveshare 24155
ID: 1184100
5906623427338
zł82.52
Tax included
zł67.09 tax excl.
Module with a 1.28" round colour IPS LCD display with a resolution of 240x240 pixels. Equipped with a touch panel. Communication is via SPI (display operation) and I2C (touch panel) interfaces. Waveshare 1.28inch Touch LCD
Description
A module with a circular colour LCD IPS display and touch panel. It has a diagonal of 1.28" and a resolution of 240x240 pixels. It is equipped with a GC9A01 controller to operate the display (communication is via the SPI interface) and a CST816S controller for the touch panel, which communicates via the I2C bus. It is compatible with both 3.3 V and 5 V systems. Support in the form of use cases with Raspberry Pi, Jetson Nano, Arduino and STM32 is available on the Wiki page.
Features
- Diagonal: 1.28"
- Display type: LCD IPS
- Display controller: GC9A01
- Touch panel controller: CST816S
- Resolution: 240x240 px
- Communication interface: SPI (display), I2C (touch panel)
- Colour: 65K RGB
- Pixel size: 0.135 x 0.135 mm
- Operating voltage: 3.3 or 5 V
- Dimensions (diameter): 32.4 mm
Kit contains
- 1.28inch Touch LCD display
- GH1.25 13-pin cable
1184100
Data sheet
- Screen type
- IPS
- Diagonal (inch)
- 1,28
- Resolution
- 240 x 240 px
- Interface
- SPI
- Touch
- Yes
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 125
Available
NUCLEO series starter kit equipped with STM32G474RE microcontroller (512 kB Flash, Cortex-M4), with built-in programmer-debugger ST-Link-V3E, equipped with connectors compatible with Arduino.
zł96.31
24h
Available quantity: 4
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł299.00
Delivery date unknown
No product available!
Other products in the same category (16)
320x240 pixels display driven with the ILI9341 chipset, PiTFT, TFT shield v2 and 2.8" TFT breakout. Adafruit 1774
zł105.83
4 weeks
No product available!
IPS LCD 7 "touch screen display for Raspberry Pi. The display is equipped with HDMI interface for image display and USB for touch screen. Resolution 1024x600 pixels. Waveshare 7inch HDMI LCD (C) (with bicolor case)
zł199.00
24h
Available quantity: 10
Available
10.1 inch 1024*600 Multicolor Graphic LCD, with capacitive touch screen and stand-alone touch controller
zł435.83
24h
Available quantity: 1
Available
1024×600, 10.1 inch Capacitive Touch Screen LCD, Supports Multi mini-PCs, Multi Systems, Multi Interfaces
zł489.00
24h
Available quantity: 1
Available
Display 7 "1024x600 IPS compatible with LattePanda V1.0 mini computer. Display powered from LattePanda, no additional power supply needed DFRobot FIT0477
zł227.96
24h
Available quantity: 3
Available
LCD TFT display with a diagonal of 2.4 "and a resolution of 320x240 pixels. Equipped with a resistive touch panel and microSD slot. Designed for use with Feather series plates. Adafruit 3315
zł207.40
4 weeks
No product available!
IPS, 1280×800, 10.1 inch Capacitive Touch Screen LCD, Supports Multi mini-PCs, Multi Systems, for Raspberry Pi and other boards
zł555.00
24h
Available quantity: 14
Available
800×480, 7 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems + Bicolor case
zł206.30
24h
Available quantity: 1
Available
TFT LCD display with a diagonal of 3.5" and a resolution of 480x320 pixels. Equipped with a resistive touch panel and a microSD slot. Intended for use with Feather series boards. Adafruit 3651
zł209.89
24h
Available quantity: 1
Available
LCD display with a resolution of 800x480 pixels with a resistive touch panel. Designed for Raspberry Pi minicomputers. Waveshare 4inch HDMI LCD
zł148.39
4 weeks
No product available!
4inch Touch LCD Shield for Arduino is an overlay with a 4-inch LCD display. The screen has a resolution of 480x320 pixels. Communication with the display is via the SPI interface. Waveshare 4inch TFT Touch Shield
zł113.50
24h
Available quantity: 9
Available
7 "LCD TFT display module, 800 x 480 pixels (8: 5) resolution, 8080 interface, LED backlight, I2C touch panel, Waveshare 7inch Capacitive Touch LCD (C)
zł264.09
4 weeks
No product available!
IPS LCD color screen module with DPI interface 7 "1024 x 600 pixels for Raspberry Pi.
zł119.00
4 weeks
No product available!
HDMI 3.5 "480 x 320 pixel color LCD module with touch panel for Raspberry Pi. Waveshare 3.5inch HDMI LCD
zł145.35
24h
Available quantity: 3
Available
7" LCD display with capacitive touch screen. The display is equipped with HDMI interface for image display and USB for touch screen. It has a resolution of 1024x600 pixels. DFRobot DFR0506
zł372.71
24h
Available quantity: 1
Available
IPS Touch LCD (capacitive) display 13.3 inch with 1920x1080 pixel resolution by Waveshare. Works with all Raspberry Pi computers, as well as with Banana Pi, Banana Pro, BeagleBone Black. The display has an HDMI interface, a touch panel with USB. Waveshare 13.3inch HDMI LCD (H) (with case).
zł944.09
24h
Available quantity: 28
Available
Module with a 1.28" round colour IPS LCD display with a resolution of 240x240 pixels. Equipped with a touch panel. Communication is via SPI (display operation) and I2C (touch panel) interfaces. Waveshare 1.28inch Touch LCD