WEP 852D + SE 2in1 soldering station on compressor with soldering iron 75W
ID: 578808
zł334.11
Tax included
zł271.63 tax excl.
The WEP 852D + SE soldering station is a hot air station for soldering of electronic systems, e.g. BGA, SMD, etc., and a 75W tip soldering station. Both station modules can work independently of each other. The wide application and minimal failure rate of the device gives it a leading position on the market of soldering stations. WEP 852D+SE
Description
The WEP 852D + SE soldering station is a hot air station for desoldering and soldering of electronic systems, e.g. BGA, SMD and etc. (the air source is a compressor) and a 75W soldering station with a stronger tip 907F (original Hakko heating element) Japanese production). It has two built-in LED displays informing about the set temperature of hot air and tip. The station also has Hotair airflow adjustment. It is ESD Safe antistatic designed which protects soldered components from damage. The station is additionally equipped with an automatic cooling system after finishing work. This effectively extends the life of the heating element. Thanks to the high power of 75W and heating speed, the tip station is suitable next to lead soldering for lead-free soldering. The station has a solid metal housing.
Features
- Power supply: 230 V
- Digital PID control
- LED display for hot air temperature
- LED tip temperature display
- Smooth regulation of hot air temperature in the range from 100-500°C
- Hotair temperature stability: ±1°C
- Blowing capacity max 24 l/min
- Smooth temperature control of the tip flask in the range from 100-500°C
- Temperature stability of the tip flask: ± 2°C
- Hotair cable length up to 90 cm
- Long power cord
- 3 pieces of round nozzles with 5mm, 7mm, 9mm diameters
- The heating element 50 W peak power when warming up 75 W peak can be up to 140 W
- 75 W peak power consumption
- ESD Safe system
- Earth resistance below: 2 ohm
- Potential to the ground below: 2 mV
- Length of the tip flask up to 100 cm
578808
Data sheet
- Station type
- 2in1 (tip soldering iron + hotair)
- Tip soldering iron temperature
- 100 - 500 °C
- HotAir temperature
- 100 - 500 °C
- Power
- 75 W
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The most popular Sn60Pb40 SW26 solder is a high-quality lead product with SW26 flux, intended for professional soldering in electronics and electrical engineering, meeting the EN ISO 9453:2014 standard
zł4.31
24h
Available quantity: 287
Available
RF800 flux is a medium-active rosin solution that does not require washing. AG Termopasty ART.AGT-042
zł4.66
24h
Available quantity: 33
Available
The sponge is indispensable at the time of soldering, it removes tin residues and stains from the tip. Dimensions 55x55mm
zł3.90
24h
Available quantity: 22
Available
Other products in the same category (16)
WEP 937D + soldering station with smoothly adjustable temperature in the range from 200 ° C to 480 ° C, temperature sensor and LED display. WEP 937D +
zł175.78
24h
Available quantity: 1
Available
Soldering station with a soldering iron (100 ° C ... 480 ° C) and a soldering iron with a power of 75W (200 ° C ... 480 ° C). It has 4 LED displays, a 30V 5A service power supply, and a set of 4 nozzles
zł808.29
24h
Available quantity: 1
Available
Soldering iron station with a power of 60 W, temperature control in the range from 90°C to 480°C. The set includes rosin and tip cleaner. WEP 926LED V3 Black
zł124.71
1 weeks
No product available!
Soldering station with a ceramic heating element with a capacity of 45W, temperature 200.40 ° C
zł112.00
24h
Available quantity: 1
Available
The WEP 968DA + soldering station is a hot air station and a soldering iron with LED display. It is equipped with a SAMSUNG microprocessor that checks the station\'s operating parameters and corrects them to the set values. The station is suitable for soldering and desoldering electronic components such as SOIC, CHIP, QFP, PLCC, BGA, SMD. WEP 968DA+
zł482.65
1 weeks
No product available!
WEP 938 soldering station is a powerful soldering iron that quickly reaches the set temperature and quickly compensates for heat loss during operation. Thanks to this, you can solder at a lower temperature compared to cheaper soldering irons with slow temperature compensation. The station has the functions: temperature memory, sleep function, automatic shutdown. WEP 938
zł286.80
1 weeks
No product available!
WEP 872D is a 2-in-1 soldering station with separate control of the hot-air and soldering iron handles, offering a temperature range up to 480 °C and digital PID regulation. Thanks to compressor-based airflow, a wide selection of nozzles and tips, and an ESD-Safe system, it is suitable for electronics servicing, assembly work and SMT/BGA repair tasks.
zł301.74
1 weeks
No product available!
Soldering station 2 in 1 for hot air and arrowhead. With original Japanese heating elements Hakko and PID controller correcting the temperature on an ongoing basis.
zł609.59
24h
Available quantity: 1
Available
5W1 soldering station with 800 W power: Hotair, soldering iron, service power supply 0-15V/1A, RF signal tester and voltage meter. The set includes a set of nozzles and a gripper for integrated circuits. YIHUA 853D
zł511.68
1 weeks
No product available!
937D digital soldering station + 50-100 W power
mutex / ocfipreoqyfb / mutex
zł129.90
1 weeks
No product available!
Hotair soldering station 100..480 deg. C, soldering tip 75W 200..480 deg. C. Settings are displayed on LED displays
zł356.70
1 weeks
No product available!
WEP 968DB + is a hot air soldering station and a tip soldering iron with a peak power of 70 W with fume extraction from under the tip. It is used for soldering of electronic components, shrinking, welding of plastics, heating. The station is equipped with a SAMSUNG microprocessor that checks the operating parameters of the station and corrects them to the set values. WEP 968DB+
zł507.05
1 weeks
No product available!
The WEP 995D soldering station is a station consisting of a hot air soldering iron and a tip soldering iron (75 W). It has a PID controller, LCD display, adjustable temperature and air blow out provided by the fan located in the flask. It is used for soldering and desoldering electronic components such as: SOIC, CHIP, QFP, PLCC, BGA, SMD. WEP 995D
zł573.76
1 weeks
No product available!
YIHUA 938BD soldering station + thermocouple + 2 in 1 flask
zł486.31
1 weeks
No product available!
Soldering station with soldering iron, LED lamp and magnifying glass. Station power 130 W. YIHUA 926
zł155.91
1 weeks
No product available!
A digital flask soldering station with a continuously adjustable temperature in the range of 200.40 ° C. It is equipped with a LED display.
zł130.58
1 weeks
No product available!
The WEP 852D + SE soldering station is a hot air station for soldering of electronic systems, e.g. BGA, SMD, etc., and a 75W tip soldering station. Both station modules can work independently of each other. The wide application and minimal failure rate of the device gives it a leading position on the market of soldering stations. WEP 852D+SE