emPower WiFi Module - Redpine Signals RS9113 (2.4 GHz) (6.37.03.02)

Wi-Fi module based on the ESP8266 system - simplicity of use (communication through UART, supports AT commands), 3.3V power supply, support for WPA / WPA2 encryption - these features make the EPS8266 module applicable anywhere, where reliable and effective data transmission. The module is not equipped with an antenna, it should be attached using the U.FL connector. ESP-05

WiFi module developed by AI-Thinker Co., Ltd with ESP8266 processor. Integrates a 32-bit MCU microcontroller with 80 MHz clock, RTOS support, Wi-Fi and antenna. The module supports the IEEE802.11 b / g / ni standard and has a complete TCP / IP protocol stack. AI-Thinker ESP-12S

Arduino compatible shield for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. WRL-13287

WiFi/BLE module that supports both the 2.4 GHz and 5 GHz WiFi bands, as well as Bluetooth Low Energy (BLE 4.2) communication. It has a built-in chip antenna and 2.54 mm pitch connectors, which greatly facilitate prototyping. Tibbo WA2000C

Miniature (25x40mm) WiFi b / g / n module with 2.0mm goldpin connection with TCP and UDP protocols operating in standalone and access point mode. The module is equipped with UART and Ethernet interfaces, it is also possible to control GPIO lines. Powered by 3.3V. HF-A11-1

WiFi 2.4 GHz, IEEE Std. 802.11b RF Transceiver Module, Connector for External Antenna, Microchip, RoHS

The Raspberry Pi RMC20452T is a Wi-Fi 4 and Bluetooth 5.2 module designed for use with Raspberry Pi microcontrollers like the RP2040. It offers low power consumption and simple integration thanks to its gSPI interface and full radio certification. Ideal for IoT projects, home automation, and wireless communication systems

The HLK-B35S module is a compact Wi-Fi + BLE solution for wireless communication in IoT and automation projects. modHLK-B35S

UART to Wi-Fi 802.11 b/g/n converter module with external antenna, which can connect traditional serial device and MCU controlled device to Wi-Fi network for control and management. USR-WIFI232-B2

Wireless-BE200 is a modern Wi-Fi 7 network card with an M.2 E Key interface, offering high throughput across three frequency bands and Bluetooth 5.4 for versatile wireless connectivity. With advanced technologies such as MU-MIMO and WPA4, it is ideal for upgrading computers, development kits, and modern embedded systems with fast and secure network access.

The Wireless-RTL8822CE module with the RTL8822CE-CG chip enables high-speed, dual-band WiFi and Bluetooth 5.0 connectivity, supporting wireless communication in embedded systems. Thanks to its compatibility with the M.2 A/E Key interface and NVIDIA Jetson boards, it is used in projects requiring reliable network connection and data transmission in IoT environments, robotics, or video processing.

High-Flying WiFi module, IEEE802.11b / g / n, with integrated PCB antenna, RoHS. HF-LPB100-1

WiFi module based on ESP8266. It has an embedded antenna and 0.96 "OLED display. The module can be programmed in Lua (under NodeMCU firmware control) or in the Arduino IDE. Provides 12 GPIO lines.

An integrated module combining WiFi, Bluetooth 4.0 and FM radio. It has derived SDIO, UART and PCM interfaces. Ampak AP6335

Wifi module with ESPR8266 ESPRESSIF for communication in the 2.4 GHz band. It is powered by a voltage from 3 V to 3.6 V, available in an SMD enclosure. ESP-WROOM-02

The low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. The board integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. DFR0478