![TE0712-01-100-2C - a set with the Xilinx Artix-7 system TE0712-01-100-2C - a set with the Xilinx Artix-7 system](https://kamami.pl/29685-large_default/te0712-01-100-2c-a-set-with-the-xilinx-artix-7-system.jpg)
![TE0712-01-100-2C - a set with the Xilinx Artix-7 system TE0712-01-100-2C - a set with the Xilinx Artix-7 system](https://kamami.pl/29685-large_default/te0712-01-100-2c-a-set-with-the-xilinx-artix-7-system.jpg)
zł1,210.30 tax excl.
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-01-100-2C
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. All modules in this series are mechanically and also largely electrically compatible. You can use TEBA0841-01, TE0703-05 , or TE0705-04 as the base plate for this module.
Base plate for Trenz Electronics 4x5 cm modules, e.g. TE0741, TE0712. The board allows connecting to the module interfaces: USB, Ethernet, JTAG. TE0705-04
No product available!
TEBA0841 is a base plate for Trenz Electronic 4 x 5 modules, e.g. TE0741 series. The FPGA input / output ports can be connected directly to the periphery via two 50 pin goldpin connectors. TEBA0841-01
No product available!
FPGA development board with Kintex 7 FPGA system and FT2232H two-channel USB converter from FTDI. Numato Lab FPGA010A-SS
No product available!
Development board FPGA with ZYNQ XC7Z020-1CLG400C system, built-in USB, audio / video interfaces, JTAG programmer and compatible connector Arduino UNO R3 and Raspberry Pi. The set works with the open-source PYNQ project that combines FPGA with Python. TUL PYNQ-Z2
No product available!
The Digilent Genesys 2 board is an advanced, high-performance, ready-to-use digital circuit development platform based on the powerful Kintex-7™ Field Programmable Gate Array (FPGA) from Xilinx. 410-300
No product available!
The Digilent Cmod A7 is a small, breadboard friendly 48-pin DIP form factor board built around a Xilinx Artix-7 FPGA. The board also includes a USB-JTAG programming circuit, USB-UART bridge, clock source, Pmod host connector, SRAM, Quad-SPI Flash, and basic I/O devices. 410-328
No product available!
Image processing kit on the ZedBoard development board. The kit includes a Zedboard board, an adapter and two Pcam cameras. Digilent 471-034
No product available!
FPGA development board with Xilinx Kintex-7 FPGA chip with 4 GB DDR3L SDRAM memory. Equipped with a fast USB 3.1 interface. Numato Lab NLFX1004-A
No product available!
Development Kit Artix-7 256 MB DDR3L, 16 MB Quad-SPI flash memory, programming via JTAG
No product available!
No product available!
Universal Software Radio Peripheral (USRP) single-board platform operating in the frequency range from 70 MHz to 6 GHz. It allows you to start working with GNU Radio and prototyping your own GSM base station with OpenBTS. Digilent 471-043
No product available!
FPGA development board with Xilinx Spartan 6 chip. Equipped with PCIe interface and two 1Gb DDR3 SDRAM memories. Numato Lab FPGAPCIE0001C
No product available!
Development board with Xilinx Artix 7 chip equipped with M.2 connector. It offers a PCIe Gen2 interface and DDR3 2 Gb memory. Numato Lab NLFX1006
No product available!
FPGA development board with Xilinx Kintex-7 FPGA chip with 4 GB DDR3 SDRAM memory. Equipped with a fast USB 3.1 interface. Numato Lab NLFX1002-C
No product available!
Development kit with Xilinx Spartan-6 FPGA. Equipped with displays, buttons, audio and video outputs and a breadboard. Numato Lab WXDE001
No product available!
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-01-100-2C