Cmod S7 - module with Spartan-7 FPGA
ID: 575970
410-376
zł450.36
Tax included
zł366.15 tax excl.
DIP module with 36 pins, based on the Xilinx Spartan-7 FPGA chip. Provides 32 digital I/O signals and 2 analog input signals. The pins are spaced 100 miles (2.54 mm), making Cmod S7 perfect for use with breadboards. Digilent Cmod S7
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The Digilent Cmod S7 is a small, 48-pin DIP form factor board populated with 36 pins and built around a Xilinx Spartan-7 FPGA. The 32 FPGA digital I/O signals, 2 FPGA analog input signals, an external power input rail, and ground are routed to 100-mil-spaced through-hole pins, making the Cmod S7 well-suited for use with solderless breadboards. At just 0.7” by 3.05” inches, it can be loaded in a standard socket and used in embedded systems. The board also includes a programming ROM, clock source, USB programming and data transfer circuit, power supplies, LEDs, and buttons.
Digilent Cmod S7 can be configured in several ways:
- from a PC via the built-in USB programming circuit
- from an external programmer connected to the 6-pin JTAG connector
- from the built-in Quad-SPI flash memory
Configuration files can be prepared using Xilinx’s ISE 14.2 (or newer) software, using the "Digilent’s Adept system" or using older versions of Xilinx tools. The Xilinx’s ISE / Impact or Digilent’s Adept software should recognize the board and FPGA connected to the PC using a USB cable.
Xilinx’s iMPACT tool and Digilent’s Adept can be used to program FPGA and embedded Quad-SPI Flash memory. The documentation contains information on software and configuration.
Features
-
Xilinx Spartan-7 FPGA (XC7S25-1CSGA225C)
-
3,650 slices containing four 6-input LUTs and 8 flip-flops
-
1,620 Kbits of fast block RAM
-
Three clock management tile, each with a phase-locked loop and mixed-mode clock manager
-
80 DSP slices
-
Internal clock speeds exceeding 450 MHz
-
On-chip analog-to-digital converter (XADC)
-
Programmable over JTAG and Quad-SPI Flash
-
-
Memory
-
4 MB Quad-SPI Flash
-
-
Power
-
Powered from USB or 5V external supply connected to DIP pin 24 (micro USB cable NOT included)
-
-
USB
-
USB-JTAG programming circuitry
-
USB-UART bridge
-
-
Push-buttons and LEDs
-
2 Buttons
-
4 LEDs
-
1 RGB LED
-
-
Expansion Connectors
-
1 Pmod connector
-
8 total FPGA I/O
-
-
48-pin DIP form-factor headers
- 36 populated pins
- 32 total FPGA I/O
- 2 Single-ended 0-3.3V analog inputs to XADC
-
575970
You might also like
No product available!
Available
The JTAG-SMT3-NC module is a small, complete, surface-mounted Xilinx FPGA programmer board. It works with Xilinx takm software such as iMPACT, ChipScope ™, Vivado, and EDK. The module can be mounted on the main board as other components. Digilent 410-357
zł321.17
Delivery date unknown
No product available!
Other products in the same category (16)
No product available!
Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2C
zł911.23
6 weeks
No product available!
Module with Xilinx Artix-7 200T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-02-200-2C3
zł1,716.17
6 weeks
No product available!
Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX75 FPGA chip. Comes with a enclosure. Digilent 471-044
zł6,642.00
Delivery date unknown
No product available!
Development kit with Xilinx Spartan-6 FPGA. Equipped with displays, buttons, audio and video outputs and a breadboard. Numato Lab WXDE001
zł1,642.09
6 weeks
No product available!
ZedBoard is a low-cost development board for the Xilinx Zynq-7000 all programmable SoC (AP SoC). This board contains everything necessary to create a Linux®, Android®, Windows®, or other OS/RTOS based design. 410-248
zł3,299.00
24h
Available quantity: 6
Available
Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX150 FPGA chip. Digilent 6002-410-021
zł8,145.15
6 weeks
No product available!
No product available!
Image processing kit on the ZedBoard development board. The kit includes a Zedboard board, an adapter and two Pcam cameras. Digilent 471-034
zł4,353.94
6 weeks
No product available!
Module with Xilinx Artix-7, USB 3.0 / FIFO bridge, 1GB DDR3L SDRAM memory, 32 MB flash memory and pulse converters to ensure all voltages in the system. Everything fits on a small 4 x 5 cm tile. TE0713-01-200-2C
zł2,372.72
6 weeks
No product available!
FPGA development board with Xilinx Artix-7 FPGA. Equipped with 24 GB of DDR3 SDRAM memory and an Edge Rate Rugged High-Speed male connector. Numato Lab NLFX1009
zł9,833.91
6 weeks
No product available!
No product available!
FPGA development board with Xilinx Spartan 6 chip. Equipped with PCIe interface and two 1Gb DDR3 SDRAM memories. Numato Lab FPGAPCIE0001B
zł2,949.49
6 weeks
No product available!
Module with Xilinx Artix-7 35T, FLASH memory with 32 MB capacity. Everything fits on a small 4 x 5 cm tile. TE0711-01-35-2C
zł633.04
6 weeks
No product available!
The Digilent Genesys 2 board is an advanced, high-performance, ready-to-use digital circuit development platform based on the powerful Kintex-7™ Field Programmable Gate Array (FPGA) from Xilinx. 410-300
zł6,451.46
6 weeks
No product available!
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity. Everything fits on a small 4 x 5 cm tile. TE0711-01-100-2C
zł1,015.12
6 weeks
No product available!
DIP module with 36 pins, based on the Xilinx Spartan-7 FPGA chip. Provides 32 digital I/O signals and 2 analog input signals. The pins are spaced 100 miles (2.54 mm), making Cmod S7 perfect for use with breadboards. Digilent Cmod S7