Category: RETIRED PRODUCTS

Designed to protect electrical and electronic devices against electromagnetic interference, the EMI EN2010-10-F network filter supports high-power devices up to 10 A, ensuring better performance and extended life of servers, audio-video equipment and industrial machines. Akyga EN2010-10-F

Replaceable concrete scraper blade 150x350 mm, made of 65 Mn steel, 0.9 mm thick, with two holes for mounting with M5 screws, intended for leveling hard surfaces and removing old felt or floor coverings. Vorel-05774

Steel clamps are an essential tool in every workshop, both amateur and professional. Their versatility and resistance to external conditions make them the choice of many specialists in various fields. They ensure not only durability and reliability, but also the safety of the assembled elements. Yato YT-70569

SkyRC iMax B6 V2 is an advanced 60W charger that can charge, discharge and balance LiPo, LiHV, NiCd, NiMH, AGM and Pb batteries up to 6S with a current of up to 6A. Equipped with automatic battery parameter detection and overload and overheat protection, it is an ideal choice for modelers and RC enthusiasts thanks to its compact size and intuitive interface.

The camera is equipped with an ultra-sensitive Sony STARVIS IMX290 image sensor, which allows for recording in very low light conditions. It has an interchangeable M12 lens with an 88° viewing angle (HFOV), which provides a wide field of view. Thanks to advanced imaging technology, it is ideal for night conditions and minimal light. ArduCAM B0408

Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 150 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP1501

NanoPi R6C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor and 4 GB of LPDDR4x RAM. Supports booting from microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6C

USB Type-C PD power supply with a power of 27 W. It is dedicated to, among others: for Raspberry Pi 5 minicomputers. It has a European plug and supports USB Power Delivery 5.1V/5A, 9V/3A, 12V/2.25A, 15V/1.8A. Waveshare PSU-27W-USB-C-EU

The Siglent SDG1032X, featuring a 30 MHz maximum output frequency and two output channels, is an indispensable function generator for engineers and technicians. With a sampling rate of 150 MSa/s, 16kpts memory, and 16-bit vertical resolution, this device provides high precision and reliability. Its compact design, along with standard USB and LAN interfaces and an optional GPIB, facilitates seamless integration into measurement systems and automation of tasks. Siglent SDG1032X

NanoPi R6S minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor, 8 GB LPDDR4x RAM and 32 GB eMMC Flash memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6S

NanoPi R6S minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor, 8 GB LPDDR4x RAM and 32 GB eMMC Flash memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6S

NanoPi R5C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3568B2 processor, 4 GB of LPDDR4x RAM and 32 GB eMMC memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian. FriendlyELEC NanoPi R5C

NanoPi R5C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3568B2 processor, 4 GB of LPDDR4x RAM and 32 GB eMMC memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian. FriendlyELEC NanoPi R5C

NanoPi R5C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3568B2 processor, 2 GB of LPDDR4x RAM and 32 GB eMMC memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian. FriendlyELEC NanoPi R5C

NanoPi R6C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor and 4 GB of LPDDR4x RAM. Supports booting from microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6C

EPCglobal Gen2 Ultra-Thin Adhesive RFID Tags Compatible with Simultaneous RFID Reader. SparkFun WRL-20226

3D printer with automatic table leveling and printing resume function. Equipped with a double Z axis and a filament sensor. It offers a large working space of 240 x 240 x 260 mm and uses a metal hotend. It allows printing at a speed of 300mm/s, which translates into 30% faster printing compared to previous versions of Sidewinder printers. Artillery Sidewinder X3 Pro

3D printer with automatic table leveling and printing resume function. Equipped with a double Z axis and a filament sensor. It offers a large working space of 300 x 300 x 400 mm and uses a fully metal hotend. It allows printing at a speed of 300mm/s, which translates into 30% faster printing compared to previous versions of Sidewinder printers. Artillery Sidewinder X3 Plus

3D printer with automatic table leveling and printing resume function. Equipped with a double Z axis and a filament sensor. It offers a large working space of 240 x 240 x 260 mm and uses a full metal hotend and a dual gear extruder. It allows printing at a speed of 500mm/s. Artillery Sidewinder X4 Pro