- Out-of-Stock
A compact digital oscilloscope that is ideal for a variety of applications. Equipped with a 2.8" colour display. It offers a real-time sampling rate of 2.5 MS/s and a bandwidth of 200 kHz. This enables it to accurately analyse both analogue and digital signals. Trigger functions in single, normal and automatic modes provide the flexibility to adapt the instrument to different signal types. In addition, the oscilloscope allows easy switching between rising edge trigger mode and falling edge trigger mode.
The oscilloscope offers the ability to measure voltage signals up to to ±40V and to ±400V using the X10 probe. In addition, SQW 1 KHz calibration and automatic one-button adjustment make using this instrument simple and convenient. The oscilloscope has a USB Type C port for firmware updates and charging. It will find use as a device for measuring, DIY, car repair, household appliances or for research and teaching. It is also ideal for outdoor use, allowing precise measurements in a variety of conditions.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
A 3-in-1 device that combines a digital oscilloscope with an LCR tester and a DDS generator. It allows oscilloscope measurements and testing of electronic components, including diodes and transistors, as well as generation of digital signals. Fnirsi DSO-TC3 Standard
A multi-purpose multimeter that can measure DC and AC voltage, resistance and capacitance, as well as frequency and temperature. Features include a diode tester, circuit continuity test, hold function , automatic switch-off and LCD backlight. Fnirsi S1
Handy generator of ±12V voltage and 4-20mA current signals. Powered by a built-in battery, USB connection or external voltage of 15 V to 30 V. Fnirsi SG-002
No product available!
USB tester for precise monitoring of the performance of devices connected to the USB port. It can recognise fast charging modes and monitor and convert PD modes. It has a metal housing. Fnirsi FNB58
No product available!
Needle bending needle, for precise glue application, Flux 0.413mm internal diameter and 0,7176mm outside diameter
No product available!
Needle bending needle, for precise glue application, Flux 0.337mm internal diameter and 0,6414mm outside diameter
No product available!
Needle bending needle, for precise glue application, Flux 0,311mm internal diameter and 1.26mm outside diameter
No product available!
Needle bending needle, for precise glue application, Flux 0.25mm internal diameter and 0,5144mm outside diameter
No product available!
Needle bending needle, for precise glue application, Flux 0,26mm internal diameter and 0,4636mm outside diameter
No product available!
Needle bending needle, for precise glue application, Flux 0,21mm internal diameter and 1.26mm outside diameter
No product available!
Needle bending needle, for precise glue application, Flux 0.81mm internal diameter and 1.26mm outside diameter
No product available!
Silicone protective case for the Huskylens vision module. It was made of a soft and flexible material, it perfectly fits the shape of the tile. DFRobot FIT0647
No product available!
Module with a CCS811 air quality sensor for measuring the concentration of carbon dioxide (CO2) and volatile organic compounds (VOC) in the air. It communicates via the I2C interface. DFRobot SEN0339
No product available!
Evaluation kit with SiFive Freedom E310 microcontroller with RISC-V (ISA) architecture. It includes 32MB QSPI flash memory, NXP K22 ARM Cortex-M4 microcontroller for USB support and JTAG interface, Qwiic and USB Type-C connector. SparkFun DEV-15594
No product available!
Cable with a length of 150 mm, on one side terminated with a Qwiic connector, and on the other side with single female goldpin connectors. It allows you to connect Qwiic modules, e.g. with development board. SparkFun CAB-14988
No product available!
Extension module for Raspberry Pi designed to build the user interface. It is equipped with a 2.4-inch TFT LCD display, microphones, speaker, buttons, joystick and RGB LEDs. SparkFun DEV-16653
No product available!
Adapter board from SODIMM200-2.5 to 2.54mm connectors
No product available!
Evaluation kit with Bluetooth 5.0 Sparkfun Artemis module. Equipped with a microphone, kmaers and accelerometer. Himax HM01B0 camera included. SparkFun KIT-17071
No product available!
The expansion module to support two cameras is designed for Raspberry Pi minicomputers. The board allows you to connect two cameras via CSI connectors to one minicomputer connector. ArduCAM B016601
No product available!
Evaluation kit with LittleBee GW1N-1 FPGA chip. Offers 1152 LUTs and 864 Flip-Flops (FF). The board has an FPC connector for the display and a USB type C. Sipeed Lichee Tang Nano
No product available!
Digital oscilloscope with compact dimensions. It offers a frequency bandwidth of 200 kHz and a sampling rate of 2.5 MS/s. Equipped with a 2.8" colour display with a resolution of 320x240 pixels. Fnirsi DSO152