Category: STARTER KITS, PROGRAMMERS, MODULES

The module with the tilt sensor, the sensor output is a digital signal. The module has a connector in accordance with the Grove standard. Seeed studio 101020025

Module with a black and white OLED display with a resolution of 128x64 px, designed for FireBeetle plates. It communicates via the I2C interface. DFRobot DFR0507

Module with a flame sensor or other light sources with a wavelength in the range of 760 to 1100 nm. It was based on the YG1006 sensor (photovolver NPN). The sensor has a connector compatible with the Grove standard. Seeed studio 101020049

Development board based on the u-blox NORA-W306 module, offering dual-band WiFi and Bluetooth Low Energy. Equipped with a microcontroller with two Arm Cortex-M33 and Cortex-M23 cores, ideal for battery-powered IoT projects. It offers USB Type-C, microSD, JST for LiPo batteries, and 20 GPIO pins, supports a variety of communication interfaces, and allows easy integration with the Qwiic system and programming via Arduino IDE. SparkFun WRL-21637

The board is equipped with ATSAMD51 microcontroller with ARM Cortex-M4 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3857

Gravity: I2C 3.7V Li Battery Fuel Gauge is a module for monitoring the parameters of the Li-ion battery allowing for precise measurement of the flow of charge to / from a 1-source source with an input voltage of 2.5-4.2V. DFRobot DFR0563

ESP32-DevKitC-32E is a development kit based on the ESP32 module, supporting WiFi 802.11 b/g/n and Bluetooth, ideal for IoT and home automation projects. The integrated dual-core Tensilica LX6 microcontroller offers high computing power and support for many interfaces, and thanks to compatibility with the Espressif SDK and the Arduino and MicroPython platforms, programming is quick and easy.

ESP8266-DevKitS – a board for quick programming and launching of ESP8266 modules without soldering. Ideal for IoT prototyping. Espressif ESP8266-DevKitS

Module with RGB LED, it is possible to control individual colors using digital signals as well as PWM signals. The module has a connector in accordance with the Grove standard. Seeed studio 101020472

Development board based on the MediaTek MT7681 chip. Provides easy access to five GPIO pins and one UART port. The MT7681 module is a compact SoC Wi-Fi system with a built-in TCP / IP stack. Seeed Studio 113990100

Development kit with an ESP32 module featuring a 1.28-inch round display. Offers Wi-Fi and Bluetooth 5.0 communication. Perfect for IoT projects with a simple GUI. Espressif ESP32-C3-LCDkit

Knit conductive 100% silver fabric with resistance of less than 1 ohm per foot in any direction across the textile. Great for use with FLORA. 20 cm x 20 cm piece. Adafruit 1167

ESP8684-DEVKITC-02C-N4 is a development board with the ESP8684 module, 4 MB Flash, Wi-Fi, and Bluetooth LE support, perfect for IoT and automation projects. Espressif ESP8684-DEVKITC-02C-N4

The platform is based on the Atmega 32U4 microcontroller with a default Arduino compatible bootloader, 26 O / I ports and a microUSB port. Polol 3145

Compact development board with Renesas RA4M1 microcontroller, ARM Cortex-M4 48 MHz core, 256 KB Flash and 32 KB SRAM, ideal for advanced applications. It offers 19 GPIO, 14-bit ADC, 12-bit DAC, CAN BUS, USB 2.0, RGB LEDs and advanced AES128/256 encryption, and is characterized by low power consumption and small dimensions of 21 x 17.8 mm. Seeed Studio 102010551

Module with red LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0021-R

Advanced new generation universal programmer, offering ultra-fast operation thanks to USB 3.0 Type-C, 200 MHz processor and Xilinx SP6 FPGA. It supports over 26,000 devices (including NAND, EMMC, BIOS), allows operation with voltages from 1.2 V and offers ISP function for in-circuit programming. Thanks to its compact design, Polish software and free updates, it is an ideal tool for both service and industrial applications. XGecu T76

Module with pressure and temperature sensor BMP280. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020192