C-Mount lens. It has a variable focal length of 8-50 mm, FoV of 45° and manual focus. It is designed to work with the Raspberry Pi HQ camera. Waveshare 8-50mm Zoom Lens for Pi

The ESC RC controller module is designed for brush motors with a supply voltage from 3.5 to 6 V and a capacity of 1 A

Red LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection class IP65 (waterproof)

Yellow LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP21

Pink LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection level IP21

Pink LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection class IP65 (waterproof)

FLUX LED 7.62 x 7.62 [mm] 5mm ultra red, angle 90 degrees; light 1200 mcd (20mA) (2.0V) df630 nm, anode at the corner marked

Module with a voltage level converter from 5 V to 3.3 V, intended for use in the STEMMA QT/Qwiic system. It has a built-in voltage stabilizer providing 3.3 V power supply with a current of up to 500 mA. Adafruit 5637

The official camera module designed to work with Raspberry Pi minicomputers. Equipped with a Sony IMX708 sensor with a resolution of 12 Mpx and a lens with a viewing angle of 75 ° with autofocus. Version without IR filter. Raspberry Pi SC0875

GMS/GPRS 2G module operating in a wide frequency range of 850/900/1800/1900 MHz. It supports numerous protocols, including TCP, UDP, PPP, FTP, HTTP, SMTP, NITZ, PING, NTP, SSL, MQTT. Based on the latest MTK chipset, it is optimized for low-power IoT applications. Quectel M95FB

Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 3.3 V and a maximum input of up to 2 A. Pololu 4940

Module with Flash memory W25Q16 with a capacity of 16 Mbit (2 MB). It communicates via the SPI interface. Adafruit 5635

Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 6 V and a maximum input of up to 2 A. Pololu 4942

Flexible LED (LED filament) in white (warm), length 300 mm

Module with a 5 mW laser diode displaying a point. It uses a digital signal for control. It can be powered with the voltage of 5 V

Module with humidity and air temperature sensor based on the AM2302 system. It allows temperature measurement in the range from -40 to 80 ° C and the humidity measurement takes place in the range of 5 to 99% RH. The module has a connector in accordance with the Grove standard. Seeed Studio 101020019

Adapter with built-in Power Delivery (PD) trigger. It has a USB type C socket and a 4.0x1.7 mm DC plug. Maximum power up to 100 W

Retractable USB-A / microUSB-B cable with a length of 95cm. Included with the adapter for Apple iPhone devices, iPad (8-pin Apple Lightning connector). The cord is blue and is supplied in an elegant case fastened with a zipper