This module allows independent control of two Omron G5LE-14-DC5 SPDT relays, supporting currents up to 10A. Thanks to built-in BSS138K MOSFETs, it can be controlled directly from 3.3V or 5V development boards such as Arduino or Raspberry Pi. Each channel is equipped with an LED to indicate relay activation and 5mm screw terminals for convenient circuit connection. Pololu 5665

ARK terminal connector spring 2-pin, pitch 2.54 mm, non-detachable.. Set of 5 pieces

USB 2.0 Full-speed/UART converter integrated circuit, SO16 housing

Zeenko ZK07-BM is a low-noise, wideband amplifier with very high gain, powered by a battery and intended for operation in the 30 MHz – 6 GHz band. Ideal for compensating losses in long antenna lines, it provides up to 43 dB of gain and very good noise performance. Recommended for installation as close to the antenna as possible in receiving and measurement paths.

USB-C to USB-C and 3.5 mm Jack adapter allows simultaneous charging and music listening on devices without an audio port. With a built-in DAC converter, it provides high sound quality and broad compatibility.

Zeenko ZK08-BM is a low-noise, wideband amplifier with a built-in battery, intended for operation in the 50 MHz – 8 GHz range. It provides high signal gain and compensation of losses in antenna paths. Thanks to its compact design and battery power, it performs excellently in mobile and measurement applications.

IMX708-75 Camera NoIR is a high-resolution camera module with autofocus and night vision function, designed for Raspberry Pi projects. It offers 12 MP image quality with HDR and the ability to operate in darkness when using IR illumination, making it a suitable choice for monitoring, image recognition systems and 24/7 video recording.

IMX708-120 Camera is a wide-angle 12 MP camera module with autofocus and IR filter, dedicated for daytime operation in Raspberry Pi projects. It provides high image detail and a wide field of view, making it suitable for vision systems, monitoring and advanced image analysis projects.

16-channel PoE GPI/GPO module enabling connection of a PC to other electronic circuits via a network. It does not need a separate cable for power and data transmission. It can be controlled via a simple web interface or Telnet. Numato Lab NLGP1001-A

A switching converter that regulates 12V voltage from an input range of 2.6V to 20V. It offers high efficiency of 70-95% and the ability to operate with a continuous input current of up to 900mA and a peak current limit of 2.2A. With a switching frequency of 1.6MHz and a power-saving mode, it is suitable for both high-performance and low-power applications. Pololu 5585

A compact ESP32-S3-based LoRa transceiver offering stable field communication without the need for a cellular network. The device comes pre-installed with Meshtastic, a 1.3" OLED display, and an SX1262 transceiver supporting the EU868 MHz band. A built-in 1000 mAh battery ensures long battery life, while Bluetooth and USB-C support simplify setup and everyday use. The Elecrow ThinkNode M2 ​​Walkie-Talkie Mini

A compact camera module with a Sony IMX335 sensor, offering 5MP (2592 x 1944) resolution and 2K @ 30 FPS video support. Thanks to WDR technology and high low-light sensitivity, it delivers clear and detailed images in all conditions. The camera uses a 3.25mm M12 lens with a wide 91.7° viewing angle and minimal distortion, supports MJPG and YUY2 formats, and is plug & play thanks to the USB 2.0 interface. A built-in microphone enables audio recording, making it ideal for machine vision, surveillance, AI, and video conferencing systems. Waveshare IMX335 5MP USB Camera (C)

2-pin ARK mounting strip, 5.0 mm pitch. 128-5.0-02P-14-00A(H). Set of 10 pieces

2-pin ARK mounting strip, 5.0 mm pitch. 306-5.0-02P-12-00A(H). Set of 10 pieces

5 mm green LED. Set of 10 pieces

A compact evaluation board that allows you to quickly connect the FLIR Lepton thermal imaging camera module to a Raspberry Pi or your own hardware projects. The board provides a local 3-5.5V power supply and an on-board clock necessary for proper module operation, with the option to bypass these components via a jumper. FLIR Lepton Breakout Board v2.0

Seeed Studio NVMe M.2 2280 SSD 1TB is a fast and reliable storage device based on PCIe Gen3x4 and NVMe 1.3c, equipped with a heatsink for stable operation. It is a universal solution for desktops and laptops requiring high performance and a compact form factor. Seeed Studio 112990267

ISG1321 is an industrial camera module with a global shutter, wide field of view and high refresh rate, dedicated to vision systems, high-speed motion capture and inspection tasks. Equipped with a MIPI-CSI interface, it enables integration with modern computing platforms.

LWIR thermal imaging module with a 160x120 pixel matrix and integrated automatic image correction. The device provides precise temperature measurement at each pixel and video output in 14-bit, 8-bit AGC, or 24-bit RGB formats. The module features high thermal sensitivity, low power consumption, and a small footprint, making it ideal for drones, robots, and portable surveillance systems. FLIR Lepton 3.5

Zeenko ZK06-BM is a portable, low-noise RF amplifier with battery power, operating in the 10 MHz – 6 GHz band. It offers high gain stability, good overload resistance and full compatibility with spectrum analyzers, including tinySA ULTRA. Particularly recommended for measurement applications and antenna systems.