A module with line sensors designed to work with the Kitronik kit. It has two sensors in the form of phototransistors that generate an analog voltage that can be read by the microcontroller. The module is equipped with a 4-pin connector (3V, 0V, L, R), which allows for power supply and reception of signals from the sensors, and the output voltage changes depending on the detected surface, which allows it to be used not only with the Kitronik kit, but also with platforms such as Arduino or Raspberry Pi Pico. Kitronik 56111

Module with a voltage level converter 3.3 V - 5 V intended for use in the Qwiic system. It has a built-in Step Up converter providing power supply with a voltage of 5 V and a current of up to 100 mA. SparkFun SPX-17238

FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. Black EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-200mm

HSIC USB 2.0 interface controller to 10/100 Ethernet. Microchip LAN9730I-ABZJ

Infrared sensor module with TCRT5000. Can be used to detect objects in close proximity or detect lines in "Line Follower" robots

Pololu Carrier with Sharp GP2Y0D810Z0F Digital Distance Sensor 10cm

Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT

Green LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP21

The Adafruit 5974 module with the HX711 converter enables precise reading of signals from strain gauges and load cells based on a Wheatstone bridge, offering 24-bit resolution and selectable gain. With an integrated screw terminal and options for sampling rate and channel configuration, it is used in projects involving force, pressure, or weight measurement in IoT systems, electronic scales, and mechanical testing.

The Lanberg USB cable allows for seamless communication between devices equipped with a USB-C port and computers via a USB-A port. Additionally, it supports charging compatible with the Quick Charge 3.0 standard. CA-USBO-15CU-0010-BK

Module with 1.51 "OLED transparent display. Communicates via SPI or I2C interface. Waveshare 1.51inch Transparent OLED

6p male plug angled for PCBs, 2.54mm, tinned, white. Set of 10 pieces

DFR0464

Finder 55.34.8.230.0054 is an industrial electromagnetic relay with a 230 V AC coil, equipped with four changeover contact sets (4PDT) with a maximum current of 7 A. The relay features AgNi contacts and a lockable test button, facilitating diagnostics and maintenance.

ARM Cortex-M3 MCU, 512 kB Flash, 96 kB SRAM, 4032 B EEPROM, Ethernet, USB Device/Host/OTG, 2xCAN, 3xSSP, 3xI2C, I2S, DAC, ADC, EMC, QEI, SD/MMC, LQFP208, RoHS

Lanberg brand power cord from CEE 7/7 to IEC 320 C13 for PC, laptop and server power supplies. Lanberg CA-C13C-10CC-0018-BK

Module with 4-channel ADC ADS1015 converter. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 1083