Panel Mount USB Cable - B Female to Micro-B Male, length 280mm, RoHS

The module is based on the GD32E103 microcontroller, supporting CAN FD at up to 5 Mbps, making it ideal for automotive and automation applications. With AT command support, Grove connector and compatibility with XIAO RP2040 boards, the module offers easy integration in IoT projects such as monitoring or automation. Seeed Studio 114992978

Adapter with built-in Power Delivery (PD) trigger. It has a USB type C socket and a 5.5x2.5 mm DC plug. Maximum power up to 100 W

Adapter with built-in Power Delivery (PD) trigger. It has a USB type C socket and a 7.4x5.0 mm DC plug. Maximum power up to 100 W

Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal points on each digit and an extra wire for colon-dots in the center (good for time-based projects). Adafruit 812

Step-Down converter with adjustable output voltage from 4.2 V to 15 V and output voltage up to 45 V. It is equipped with reverse voltage protection, input undervoltage lockout, overload and short circuit protection. Pololu 4874

Cooling fan with a Molex 51021-0200 connector designed for Odroid N2+ minicomputers

Energy-saving environmental sensor, enabling precise measurement of temperature in the range from -40℃ to +85℃ and atmospheric pressure from 300 to 1100 hPa. Supports I2C and SPI interfaces, and thanks to the FIFO function allows to minimize energy consumption - even to 0.5 μA in standby mode. Compatible with Arduino, Raspberry Pi and Micro:bit, it is ideal for use in DIY projects, educational projects and weather stations. Seeed Studio 110992164

Step-Down converter with adjustable output voltage from 4.2 V to 15 V and output voltage up to 45 V. It is equipped with reverse voltage protection, input undervoltage lockout, overload and short circuit protection. Pololu 4854

Unshielded UTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCU6-10CC-0500-O

The compact MIDI synthesizer based on the XIAO ESP32-C3 and SAM2695 chip is a portable sound studio that lets you create music anywhere. With a built-in speaker, hundreds of instrument presets and support for up to 64-voice polyphony, it offers rich sounds and three modes: test, metronome and multitrack. With its open source, ease of use and pocket-sized format, it is the perfect tool for musicians, hobbyists and DIY creators. Seeed Studio 107990333

Module with a digital temperature and humidity sensor based on the SHT31-F system. Communication via the I2C interface. DFRobot SEN0332

Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal points on each digit and an extra wire for colon-dots in the center (good for time-based projects). Adafruit 865

8x8 matrix or a 4-digit 7-segment display. Matrices like these are \'multiplexed\' - so to control all the seven-segment LEDs you need 14 pins. Adafruit 878

8x8 matrix or a 4-digit 7-segment display. Matrices like these are \'multiplexed\' - so to control all the seven-segment LEDs you need 14 pins. Adafruit 879

Grove module with temperature, humidity and pressure sensor. The board is equipped with a Grove connector and communicates via I2C or SPI. Seeed Studio 101020193

SEN-11207 - Flexiforce Pressure Sensor - 25lbs (1" area)

Pololu 2450

Full 8-pin breakout for the SIM socket allowing direct access to SIM communication. BOB-00573