Pulse generator module based on the NE555 system with frequency control using a potentiometer. It is powered with the voltage ranging from 5 V to 12 V

Module with a relay and WiFi communication. Compatible with ESP-01 or ESP-01S

UART-CAN converter module based on the TJA1050 transceiver system. It allows for communication, for example, of a microcontroller via the CAN bus

Module with a button and blue LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020046

Module with a button and yellow LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020045

High-Flying WiFi module, IEEE802.11b / g / n, with integrated PCB antenna, RoHS. HF-LPB100-1

Transceiver module equipped with SoC ESP8285 IoT enabling communication with WiFi networks. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 113020011

Module with a microswitch (limit switch). The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020044

WiFi antenna with SMA male plug working in the 2.4 GHz frequency band. It has a gain of 3 dBi

Adafruit 2324

Module with 4-channel 12-bit DAC MCP4728 converter with built-in EEPROM memory. Equipped with a STEMMA QT connector, it communicates using the I2C bus. Adafruit 4470

USB - UART converter based on the FT232RL chip. Compatible with voltages of 3.3 V and 5 V, it is equipped with a microUSB connector. Cytron UC00A

Camera module designed for NVIDIA Jetson Nano/Xavier NX. The camera is equipped with a Sony IMX477 sensor and focus controlled by the I2C interface. ArduCAM B0273

Module with IMX298 sensor working with NVIDIA Jetson Nano. The sensor used has a 16 MP matrix and allows you to record video at resolutions of 16MP/30fps. Acrylic case included. ArduCAM B0214

Kit containing a module with two cameras with a sensor OV5647 with a resolution of 5 MP and an expansion module for NVIDIA Jetson Nano. ArduCAM B0217J5

Camera module with IMX219 sensor with a resolution of 8 MP equipped with programmable focus. Designed for NVIDIA Jetson Nano and Raspberry Pi Compute Module. ArduCAM B0181

Camera with OV9782 sensor designed for DepthAI systems. It is a replacement element for DepthAI OAK-D modules. ArduCAM B0352

Two-channel driver for DC motors with an operating voltage from 7 to 35 V and a continuous current up to 10 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDDS10

BLE module based on Cortex-M4F core with integrated 2.4GHz antenna. It has been equipped with numerous peripheral systems, including UART, I2C, SPI, I2S interfaces and ADC inputs. Has support in the Arduino IDE. SparkFun WRL-15484

This is a little 5" TFT display with WVGA 800x480 resolution and it has a resistive touchscreen overlay. The driver board only has an HDMI input but for Raspberry Pi, BeagleBone Black and other computers. Adafruit 2109