Set of bullet terminals with insulation for wires from 0.5 to 1.5 mm². The box contains 50 male and 50 female connectors in five colors: black, red, green, yellow and blue.

The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5240

A low-power development platform designed for creating LoRa-based tracking devices. It combines the Nordic nRF52840 chip with the Semtech LR1110 module, offering wide range, low power consumption, and compatibility with Meshtastic software. The board supports over 300 Seeed Grove sensors and has built-in environmental sensors and an accelerometer for expanded monitoring capabilities. Seeed Studio 114993370

LCD TFT 3.50 ", 320x240, without controller, resistive touch panel, Winstar, RoHS

A set of ferrules terminals. The box contains 870 connectors in three colors: red, green and yellow. Connectors are designed for wires from 10 to 20 AWG.

Ultra-low-power 32-bit MCU ARM®-based Cortex®-M0+, 64 KB Flash, 8 KB SRAM, 2 KB EEPROM, USB, ADC, DAC, LQFP48, RoHS

16 Mbit, low voltage, Page-Erasable Serial Flash memory with byte alterability and a 50 MHz SPI bus interface, STM, SO8, RoHS

The Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller makes basic control of a stepper motor easy. Pololu 3140

LPC55S28JBD64K, ARM Cortex-M33 Microcontroller, 32 bit, 150 MHz, 512 KB Flash, HTQFP-64

This board is a simple carrier of Broadcom’s bidirectional ±50A ACHS-7125 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. Pololu 4034

Differential pressure sensor 0 - 10 kPa, 5%, 5V, housing 867C-05, Freescale, RoHS

The BST-12095-DC-FT buzzer is an active sound transducer with a 12 mm diameter, powered by a 5 V DC supply. It generates a continuous sound signal without the need for an external driving signal, making it ideal for use in alarm and signaling systems.

Advanced electronic compass module that precisely calculates direction to within a few degrees, and its tilt compensation allows operation in difficult environmental conditions. The module is easy to use and allows to obtain measurement data via I2C interface at 5 Hz. SparkFun SEN-12916

RF module providing wireless connectivity compliant with the IEEE 802.15.4 standard. It operates in the 2.4 GHz ISM band and allows local configuration via BLE with the Digi XBee mobile application. It is equipped with a Silicon Labs EFR32MG SoC transceiver chipset. The range in buildings is up to 60 m, while in open space it reaches up to 1200 m. SparkFun WRL-22626

ARM Cortex-M3 CPU, 64kB Flash, 10kB RAM, 3xUART, 2xI2C, 2xSPI, ADC, STM, LQFP48, RoHS