Addressable LED strip controller based on the RP2350A microcontroller with dual Arm Cortex-M33 cores up to 150 MHz. It supports popular WS2812/Neopixel and APA102/Dotstar LEDs and allows for powering and programming via USB-C with current up to 3 A. It features screw-type LED connectors, a built-in RGB LED, user buttons, and a Qw/ST connector for connecting I2C sensors. Pimoroni PIM723

Step-Down XL4005 converter module with adjustable output voltage in the range from 0.8 to 30 V with a wide input voltage range from 4.5 to 30 V and a maximum output current of 5 A

AT93C46-10SU-2.7, Three-wire Serial EEPROM 1K, SOIC-8

USR-G809s-G is an industrial LTE/WiFi 6 router with an OLED display, dual SIM card support, and a wide range of VPN protocols, ideal for IoT and automation applications. With gigabit LAN ports, SFP support, and Python SDK, it is well-suited for demanding industrial applications, providing high performance and flexible configuration.

Universal test lead with LED backlight for Uni-T multimeters. Uni-T UT-L17

The Vtec by BLOW Bluetooth 4.0 OBD2 diagnostic interface is an advanced tool for monitoring vehicle parameters and diagnosing faults. It allows reading and deleting errors, analyzing performance and controlling engine operation in real time. Thanks to its compatibility with Android, iOS, Windows and MacOS systems and support for popular diagnostic applications, it is a convenient solution for every driver who cares about the technical condition of their vehicle. Vtec iTRON by BLOW

Module with ozone detection sensor. It performs measurements up to 10 ppm with a resolution of 0.01 ppm. It has a UART output and an analog output. ZE25-O3

Cap for use with shallow Feather series, with radio module RFM95W 900MHz. It offers a range of up to 2 kilometers (the range can be increased by using an external antenna). It has a SPI interface. Adafruit 3231

This industrial network switch features eight Gigabit Ethernet (10/100/1000 Mbps) ports with IEEE 802.3af/at PoE support, delivering up to 30W of power per port. The device delivers high performance with 16 Gbps throughput, 1 Mbps buffering, and a 4K MAC table, enabling stable data transmission in industrial and surveillance systems. A wide 9.6-60V DC power supply range, along with surge and EMC protection, ensures reliable operation in harsh environments. USR-ISG1008P

The DIN Half B type connector is a male, right-angle half connector with 2x32 contacts, designed for use in electronic devices. It ensures reliable signal connections in compact spaces.

URM04 v2.0 Ultrasonic Sensor

ARK terminal connector spring 2-pin, pitch 5.00 mm, non-detachable. Set of 5 pieces

The MR60FDA2 sensor kit uses 60GHz mmWave technology to reliably detect falls and people. It offers Home Assistant integration thanks to the XIAO ESP32C6 module and pre-installed ESPHome firmware. Equipped with a BH1750 light intensity sensor, RGB LED indicator and the possibility of expanding with Grove sensors, it is ideal for monitoring health, safety and home automation. Seeed Studio 114993388

LTR390-UV UV light sensor module. Allows measurement of ultraviolet and visible light intensity. Equipped with a Gravity connector, it communicates via an I2C or UART interface. DFRobot SEN0540

The GPS module allows you to download the current coordinates of position and time, has a built-in GPS receiver FGPMMOPA6H. MOD-54

The SD3031 precision real-time clock (RTC) module. It has an integrated quartz resonator, on-board SRAM and communicates via an I2C interface. DFRobot DFR0998

100BaseT Ethernet-RS232 module (EM203 + RJ203), Tibbo

DEV-11814 - USB-to-Serial Bridge - µUSB-PA5, RoHS