A set of flat female spade connectors in sizes 2.8 / 4.8 / 6.3 mm designed for quick and durable wire connections in electrical and automotive installations. The set also includes insulating sleeves and a practical organizer for easy storage

The motor driver card can drive 24 servo motors at most. It can be used to drive a multiple-joint robot machine, such as Hexapod Robot, Biped Robot, and Arm Robot. P0288

Wireless, precise temperature sensor with high accuracy with built-in recorder. Works with thermoelectric sensors type K, J, T, N, E, B, S and R

An 8-channel LoRaWAN gateway designed for indoor IoT installations, based on the Semtech SX1302 chip and the MediaTek MT7628 processor. It provides a communication range of up to 10 km and supports the EU868 and US915 bands, enabling simultaneous operation with multiple end devices. The gateway offers Wi-Fi, Ethernet, Bluetooth, and optional 4G connectivity and is compatible with TTN and ChirpStack platforms. Elecrow ThinkNode G1

Simple-to-use, open source solution for measuring weight and temperature with the ability to read multiple types of load cells and offers a simple-to-use serial menu to configure calibration value, sample rate, time stamp and units of precision. SEN-13261

Development kit with SAMD21G18 microcontroller with ARM Cortex M0 core and LoRa RFM95 868/915 MHz radio communication module. Adafruit 3178

A power module for the Pimoroni Yukon platform that allows independent control of two high-current outputs within a voltage range of 5 to 17 V. Built-in diodes and chokes enable excellent handling of inductive loads such as pumps, fans, and solenoids. Each channel can also operate in PWM mode, allowing for smooth power regulation in slow-response devices. The module supports a total current of up to 15 A and includes temperature sensors and a "power good" signal. Pimoroni PIM692

Dual VNH2SP30 Motor Driver Carrier MD03A

The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5262

This power supply module for the Pimoroni Yukon offers an adjustable output voltage from 3 to 12V using a powerful step-down converter. It provides stable power with a continuous current of 5A and a peak current of up to 10A, as well as the ability to set a fixed 5V output by cutting a dedicated trace. The module allows for the use of additional digital signals and monitoring of voltage, temperature, and power supply status. Pimoroni PIM690

Gravity: The high temperature sensor is a sensor based on the PT100 probe and adapted to very high temperatures (30-350 ° C). The module is powered by 3.3 ... 5.5V voltage. DFRobot SEN0198

Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 20 A. DFRobot SEN0211

This small breakout board couples an Electret microphone (100Hz–10kHz) with a 60x mic preamplifier to amplify the sounds of voice, claps, door knocks or any sounds loud enough to be picked up by a microcontroller’s analog-to-digital converter. Each breakout comes fully assembled and works from 2.7V up to 5.5V. BOB-12758

TFT LCD driver with DPI interface dedicated to Raspberry Pi. It allows you to operate resistive touch panels. Adafruit 2453

A compact evaluation board that allows you to quickly connect the FLIR Lepton thermal imaging camera module to a Raspberry Pi or your own hardware projects. The board provides a local 3-5.5V power supply and an on-board clock necessary for proper module operation, with the option to bypass these components via a jumper. FLIR Lepton Breakout Board v2.0

Module with MLX90614-DCC sensor for non-contact temperature measurement in the range from -70℃ to 380℃. I2C communication. DFRobot SEN0206

RS422 to TTL converter module based on MAX490 for long-distance bidirectional serial communication, up to 1000 meters, with a transmission speed of up to 2.5 Mbps. Equipped with ESD protection up to 15 kV, TVS diodes and 120 Ω terminating resistors, it provides stability and immunity to interference in demanding industrial conditions. Powered by 5 V, it works with TTL logic and is compatible with popular platforms, and LED indicators facilitate diagnostics and integration.

The PUSR U200S CPE router provides high-speed Internet access via 5G mobile networks, dual-band WiFi 6, and Gigabit Ethernet. Powered by the Qualcomm IPQ5018 processor and Qualcomm Snapdragon X62 modem, it supports 5G SA/NSA networks, delivers wireless speeds of up to 3000 Mb/s, and features four Gigabit Ethernet ports. The router is designed for business, retail, industrial, and commercial applications requiring reliable wired and wireless connectivity. PUSR U200S

A compact 5MP SPI camera module based on the OV5642 image sensor, designed for microcontrollers and embedded platforms. It enables high-quality JPEG image capture, supports multiple cameras on a single MCU, and allows short video recording, making it ideal for IoT, robotics, and battery-powered applications.. ArduCAM B0068

Adafruit module with Si7021 temperature and humidity sensor. Sensor Sillicon Labs can measure temperature in the range of -10 ~ 125 ° C, and humidity in the range of 0-100 & RH. The sensor communicates using the I2C interface. Adafruit 3251