QTRX-HD-07RC - module with 7 reflectance sensor with RC (digital) output
ID: 572289
5906623478804
zł63.04
Tax included
zł51.25 tax excl.
Module with 7 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4307
Description
Reflectance sensor consisting of array 7 QTRX optocouplers with the ability to individually control the brightness of each of the infrared LEDs. The sensors on the board are high density (HD) and the distance between them is 4 mm. The module can be supplied with the voltage ranging from 2.9 V to 5.5 V and draws current up to 17 mA. The optimum distance from the sensor to the ground is 10 mm and the maximum distance is 40 mm. The module is ideally suited for detecting changes in light reflection, so it can be used for edge detection or line tracking in linefollower robots.
Features
- Sensor type: QTRX
- Number of sensors:7
- Sensor pitch: 4 mm (distance between individual sensors)
- Full brightness LED current: 3,5 mA (regardless of the supply voltage
- )Maximum module current: 17 mA
- Output signal: digital I/O-compatible signals that can be read in parallel as timed high pulses
- Optimum sensing distance: 5 mm
- Maximum sensing distance: 40 mm
- Supply voltage: 2.9 ... 5.5 V
- Dimensions: 29,0 × 20,0 × 3,0 mm
- Weight: 1,7 g
572289
Data sheet
- Type of sensor
- QTRX
- Output type
- digital
- Number of sensors
- 7
- Power supply voltage
- 2,9 - 5,5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The A-Star 32U4 Mini ULV is a programmable module based on the ATmega32U4 from Atmel. Unlike competing products, it has an onboard switching step-up regulator that allows it to be powered efficiently from a 0.5 V to 5.5 V supply. Pololu 3102
zł119.77
24h
Available quantity: 1
Available
KAmodMPC17C724 is a module with a double MP bridge bridge type MPC17C724. The system allows you to control two DC brush motors or one bipolar stepping motor. The controller operates at a voltage range of 2.7 - 5.5 V and can work with motors with power consumption up to 0.4 A.
zł19.90
24h
Available quantity: 336
Available
4WD car chassis construction kit. It can be used as a base for building a robot
zł42.98
24h
Available quantity: 2
Available
Other products in the same category (16)
KAmodQTR8A is a module with eight photointerrupter sensors KTIR0711S. It allows to detect edge or line. Thanks to the analog outputs, is possible to connect a module to the e.g. comparator. The module can be used in analisze of the floor e.g. by Linefollower vehicles.
zł37.90
24h
Available quantity: 3
Available
Module with 5 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4405
zł48.31
24h
Available quantity: 1
Available
Module with 1 optocoupler type QTRXL with RC (digital) output. It is supplied with the voltage from 2.9 to 5.5 V, detects objects at a distance of up to 80 mm. Pololu 4501
zł16.11
24h
Available quantity: 1
Available
Module with 9 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4409
zł81.71
4 weeks
No product available!
Module with 13 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4153
zł69.24
24h
Available quantity: 3
Available
Module with 6 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4346
zł57.54
24h
Available quantity: 1
Available
This micro:bit module allows for light and object detection and line tracking, making it ideal for educational and robotic projects. Equipped with three phototransistors, it provides precise measurements, and the analog signal transmitted to the micro:bit allows for precise analysis of the surroundings. The board can be connected directly to the micro:bit or via alligator clips. Kitronik 5678
zł24.39
24h
Available quantity: 2
Available
No product available!
Module with 9 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4309
zł81.71
24h
Available quantity: 1
Available
Module with five TCRT5000 reflective sensors. Powered with 5 V, it has analog outputs. It can detect objects at a distance of up to 15 mm
zł8.43
24h
Available quantity: 5
Available
Module with an analog IR reflective sensor. It consists of an IR diode and a phototransistor which measures the intensity of the reflected light. Used, among others in line tracking robots. Cytron MAKER-REFLECT
zł8.88
24h
Available quantity: 3
Available
Reflective Optical Sensor with Transistor Output, Vishay, RoHS
zł1.89
24h
Available quantity: 36
Available
Module with 25 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4125
zł135.31
24h
Available quantity: 2
Available
The :MOVE mini MK2 robot kit allows for automatic line tracking, enhancing the interactivity of educational projects. The kit is easy to assemble, requires no soldering, and adjustable sensors allow for precise sensitivity adjustments for the left and right sides of the robot. The module can track both a dark line on a light background and a light line on a dark background, and backward compatibility with the original :MOVE mini makes it easy to use in older projects. Kitronik 5659
zł75.68
24h
Available quantity: 2
Available
Module with 2 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4142
zł15.44
24h
Available quantity: 1
Available
Module with 13 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4353
zł120.76
24h
Available quantity: 1
Available
Module with 7 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4307