QTRX-MD-05A - module with 5 reflectance sensor with analog output
ID: 572759
5906623479412
zł49.68
Tax included
zł40.39 tax excl.
Module with 5 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4445
Description
Reflectance sensor consisting of array 5 QTRX optocouplers with the ability to individually control the brightness of each of the infrared LEDs. The sensors on the board are medium density (MD) and the distance between them is 8 mm. The module can be supplied with the voltage ranging from 2.9 V to 5.5 V and draws current up to 14 mA. The optimum distance from the sensor to the ground is 10 mm and the maximum distance is 40 mm. The module is ideally suited for detecting changes in light reflection, so it can be used for edge detection or line tracking in linefollower robots.
Features
- Sensor type: QTRX
- Number of sensors:5
- Sensor pitch: 8 mm (distance between individual sensors)
- Full brightness LED current: 3,5 mA (regardless of the supply voltage)
- Maximum module current: 14 mA
- Output signal: analog signal (0 V to VCC)
- Optimum sensing distance: 5 mm
- Maximum sensing distance: 40 mm
- Supply voltage: 2.9 ... 5.5 V
- Dimensions: 37,0 × 20,0 × 3,0 mm
- Weight: 1,9 g
572759
Data sheet
- Type of sensor
- QTRX
- Output type
- analog
- Number of sensors
- 5
- Power supply voltage
- 2,9 - 5,5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Dual motor controller that allows you to control two DC motors with 2.7-10.8V voltage and 1.2A continuous current per channel. Pololu 2130
zł43.00
Delivery date unknown
No product available!
The versatile Romi chassis is a great starting point for your next mobile robot. This kit includes all the basic mechanical parts to get up and running, including two motors, two wheels, one ball caster, and battery contacts. The wheels and ball are white; all other plastic components are pink.
zł172.89
24h
Available quantity: 1
Available
Module with the ATMega4809 microcontroller from the AVR family (48 KB Flash, 6 KB SRAM, 256 B EEPROM). The module has two 15-pin connectors equipped with GPIO, SPI, I2C, PWM, USART, DAC and ADC. Arduino ABX00028
zł57.70
Delivery date unknown
No product available!
Other products in the same category (16)
Module with 2 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4402
zł21.09
24h
Available quantity: 2
Available
Module with 2 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4242
zł15.44
24h
Available quantity: 1
Available
Front sensor module of the Zumo 32U4 robot. It is included as part of the Zumo 32U4 robot kit and built into the assembled versions of the Zumo 32U4 robot. The set includes additional infrared connectors and LEDs. Pololu 3122
zł109.10
4 weeks
No product available!
QTR-1RC Reflectance Sensor (2-Pack)
zł25.22
4 weeks
No product available!
Module with 13 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4453
zł120.76
24h
Available quantity: 1
Available
Module with 7 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4247
zł39.99
24h
Available quantity: 1
Available
No product available!
Module with 4 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4204
zł22.36
24h
Available quantity: 2
Available
A module with line sensors designed to work with the Kitronik kit. It has two sensors in the form of phototransistors that generate an analog voltage that can be read by the microcontroller. The module is equipped with a 4-pin connector (3V, 0V, L, R), which allows for power supply and reception of signals from the sensors, and the output voltage changes depending on the detected surface, which allows it to be used not only with the Kitronik kit, but also with platforms such as Arduino or Raspberry Pi Pico. Kitronik 56111
zł19.45
24h
Available quantity: 6
Available
Module with an analog IR reflective sensor. It consists of an IR diode and a phototransistor which measures the intensity of the reflected light. Used, among others in line tracking robots. Cytron MAKER-REFLECT
zł8.68
24h
Available quantity: 10
Available
The :MOVE mini MK2 robot kit allows for automatic line tracking, enhancing the interactivity of educational projects. The kit is easy to assemble, requires no soldering, and adjustable sensors allow for precise sensitivity adjustments for the left and right sides of the robot. The module can track both a dark line on a light background and a light line on a dark background, and backward compatibility with the original :MOVE mini makes it easy to use in older projects. Kitronik 5659
zł75.68
24h
Available quantity: 2
Available
Module with 1 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4141
zł11.17
4 weeks
No product available!
ROB-09454 - QRE1113 Line Sensor Breakout - Digital
zł29.59
3 weeks
No product available!
Module with 15 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4115
zł75.85
24h
Available quantity: 1
Available
Module with 2 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4302
zł20.95
24h
Available quantity: 3
Available
Module with 11 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4211
zł61.75
24h
Available quantity: 1
Available
Module with 5 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4445