Programmable RGBWC COB LED strip with a length of 5 m, featuring WS2812B control chips, 24 V power supply, and IP65 protection rating. Designed for decorative lighting, gaming setups, PC cases, smart lighting systems, and DIY projects. Waveshare RGBWC-150-24V-IP65-1428D-5M

4" IPS display with a 5-point capacitive touch panel, DSI interface, and 480 × 800 resolution. Designed for Raspberry Pi, ESP32-P4, RK3506, RK3576, and embedded systems requiring a compact touch display. Waveshare 4-DSI-TOUCH-A

4.3" IPS display with a 5-point capacitive touch panel, DSI interface, and 480 × 800 resolution. Designed for Raspberry Pi, ESP32-P4, RK3506, RK3576, and embedded systems requiring a compact touch display. Waveshare 4.3-DSI-TOUCH-A

SparkFun XBee 3 is a set for wireless communication ideal to start using XBees. These modules enable data transfer from a remote sensor or data transfer from a computer to update the scoreboard or control the robot from the keyboard. Kit-15936

Digital IR distance sensor operating on the basis of a modulated signal with a frequency of 38 kHz. It can detect objects at a distance of up to 60 cm and is powered with a voltage from 4.5 to 5.5 V. Cytron MAKER-OBJECT

DC motor driver with a working voltage from 5 to 30 V and a maximum continuous current of 13 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron MD10C

Two-channel DC motor driver with an operating voltage from 7 to 35 V and a maximum continuous current of 30 A. It can be controlled by an analog signal, PWM, UART, RC signal or by means of built-in buttons. Cytron MDDS30

Plastic semi-circular lens with an outer diameter of 40 mm. Adafruit 3853

Optical Time of Flight sensor with Pmod I2C connector. The built-in ISL29501 digital signal processor calculates the time it takes for the light emitted by ToF to reach the destination and back. The calculated time is proportional to the distance. Pmod ToF has a range of up to 5 m. Digilent 410-392

Dual-channel DAC converter compatible with the SYZYGY standard. The module can simultaneously generate two 5V signals with 14-bit resolution and sampling frequency up to 100MS/s. The module is compatible with Eclypse Z7 and Genesys ZU evaluation kits. Digilent Zmod AWG 1411 410-397

Dual-channel ADC converter compatible with the SYZYGY standard. The module can simultaneously obtain two 25V signals with 14-bit resolution and sampling frequency up to 100MS/s. The module is compatible with Eclypse Z7 and Genesys ZU evaluation kits. Digilent Zmod Scope 1410-105 (410-396)

Shielded WiFi 802.11b/g/n and Bluetooth 5.1 communication module by Murata based on the Infineon CYW43439 chipset, featuring SDIO, UART, and PCM interfaces for IoT devices and industrial applications. Murata LBEE5KL1YN-814

Module with three optical inspection sensors (spectrophotometers) from the AS7265x series. The module consists of three sensors; AS72651, AS72652 and AS72653 which can detect wavelengths from 410nm (UV) to 940nm (IR). SparkFun SEN-15050

AK-NB-01A is a solid 3-pin clover network cable of the Pro series, 1.5 m long. Designed to supply laptop adapters and all other IEC C5 compatible plugs. The cable is compatible with most power supplies available in our offer. Akyga AK-NB-01A

HLK-LD2410C is a 24 GHz radar sensor for human presence and micro-motion detection, featuring UART and BLE interface. modHLK-LD2410C

Development kit featuring a 13.3" full-color E-Paper display with 1600 × 1200 px resolution and an ESP32-S3-based driver board. Utilizes E Ink Spectra 6 (E6) technology, supports 2.4 GHz WiFi and Bluetooth LE, and includes a TF card slot, audio codecs, and a Li-Ion battery charging circuit. Waveshare ESP32-S3-ePaper-13.3E6

COM-10994 - BarePaint - Conductive Paint (50ml)

HLK-LD2450 is a 24 GHz radar module designed for precise human presence and motion detection in intelligent IoT systems. modHLK-LD2405

COM-11275 Button, 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch

Programmable coin acceptor with memory for 3 types of coins. It uses the thickness, diameter and fall time of the coins for identification. Programming is done using buttons and a 7-segment display on the side of the device. SparkFun COM-11719