Audio amplifier based on the TPA3255 system with a power of 600 W with an active filter. Dedicated to the bass column (subwoofer)

Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 4 to 16 Ω. It is powered with the voltage ranging from 9 to 24 V.

Quartz resonator, housing HC49S (low), RoHS

DIP socket, 20-pin, precision, pitch 2.54mm, spacing 7.62mm, RoHS

Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 4 to 16 Ω. It is powered with the voltage ranging from 9 to 24 V.

4-wire cable that breaks out a Qwiic connector to individual female header terminals. Provides GND, VCC, SDA and SCL lines for connecting Qwiic modules to boards without a dedicated Qwiic connector. Soldered 333314

Class D digital audio amplifier with Bluetooth module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage in the range from 9 to 24 V. NS-01G

DIP8

The unmanaged network switch provides five Gigabit Ethernet ports, including four PoE+ ports for simultaneous data transmission and power delivery to connected devices. IEEE 802.3af/at support and DIN-rail mounting enable deployment in surveillance systems, automation, and industrial Ethernet installations. The offered version is supplied without a power supply. Teltonika TSW100

The 74LVC125ABQ is a four-channel, 3-state output buffer/line driver supporting voltages up to 5 V. Ideal for interfacing with 5 V logic, it features low power consumption and direct interfacing with TTL levels.

Expansion board with LoRaWAN SX1303 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1303 868M LoRaWAN Gateway HAT

Driver IC for Dual DC motor, SSOP24, Toshiba

Measuring spring red, RoHS

TXB0108PWR, 8-Bit Bidirectional Voltage-Level Translator with Auto-Direction Sensing and ±15-kV ESD Protection, TSSOP20

The TXS0104E is a 4-bit bidirectional voltage level translator, ideal for open-drain and push-pull applications, capable of translating voltages from 1.65 V to 3.6 V on port A and from 2.3 V to 5.5 V on port B. Thanks to its design, it does not require a directional control signal or power supply sequence, ensuring high immunity to electromechanical interference and ESD protection in accordance with IEC 61000-4-2 standards.

WS2812C-2020, intelligent LED 5mA 0.1W, 2020

The XL4015E1 converter is a step-down (buck) circuit that converts an input voltage of 8-36V to a regulated output of 1.25-32V, with a maximum current of up to 5A. It is characterized by high efficiency (up to 96%) and protection against short circuit and overheating, although it does not have protection against reverse polarity of the power supply.