.png)
Soldered MQ131 - ozone sensor with analog and digital outputs
ID: 1208288
zł64.30
Tax included
zł52.28 tax excl.
Ozone (O₃) sensor breakout featuring an MQ131 sensing element, an analog AO output and a digital DO output. An onboard potentiometer allows adjustment of the digital output threshold. The module operates from a 5V supply and can be used in ozone monitoring projects and systems working with ozone generators. Soldered 333110
Description
The device MQ131 from Soldered is an ozone sensor breakout designed to detect the presence of ozone (O₃) in the air. Its semiconductor sensing element changes resistance when exposed to gas, allowing changes in ozone levels to be monitored. The module can be used in ozone monitoring projects and systems working with ozone generators.
The analog AO output provides a voltage that varies with the detected gas level and can be read through a microcontroller's analog input. The digital DO output indicates when the threshold set using the onboard potentiometer has been exceeded. This allows the controller to track changes in the sensor signal or respond when the set threshold is crossed.
The manufacturer provides an Arduino library with reading and calibration examples. Before taking measurements, the sensor requires preheating and calibration according to the documentation. Converting the output voltage into ozone concentration requires the response characteristics of the appropriate sensor variant, and the resulting readings are approximate. The board operates from a 5V supply and features two mounting holes for secure installation.
Features
- Sensor and measurements
- Sensing element: MQ131
- Detected gas: ozone (O₃)
- Sensor type: semiconductor, resistive
- Preheating and calibration required before taking measurements
- Sensor variant: MQ131-H, High Concentration
- Ozone detection range: 10-1000 ppm
- Outputs and controls
- Analog output: AO
- Digital output: DO, indicating when the set threshold is exceeded
- Digital output threshold adjustable using the onboard potentiometer
- LED indicator for gas detection
- Pins: 5V, GND, AO, DO
- Power supply
- Module supply voltage: 5V
- Software
- Arduino library and examples provided by the manufacturer
- Support for analog signal readings and calibration
- Mechanical specifications
- Board dimensions: 22 × 38mm
- Two mounting holes for M3 screws
Kit includes
- MQ131 ozone sensor breakout
- 4-pin male header supplied unsoldered
1208288
Data sheet
- Interface
- Sygnał analogowy
- Type of sensor
- MQ131
- Power supply voltage
- 5 V
- Concentration measurement
- O₃ – ozon
Other products in the same category (16)
Module with hydrogen sulphide sensor made in MEMS technology. It allows gas detection in the range of 0.5 to 50 ppm and has an analog output. DFRobot SEN0568
zł43.00
24h
Available quantity: 1
Available
Module with ammonia sensor made in MEMS technology. It allows gas detection in the range of 1 to 300 ppm and has an analog output. DFRobot SEN0567
zł39.66
4 weeks
No product available!
Module with a VOC sensor (volatile organic compounds) made in MEMS technology. It allows gas detection in the range of 5 to 500 ppm and has an analog output. DFRobot SEN0566
zł23.68
24h
Available quantity: 5
Available
Methane sensor module made in MEMS technology. It allows gas detection in the range of 1 to 10000 ppm and has an analog output. DFRobot SEN0565
zł25.08
24h
Available quantity: 2
Available
Module with a smoke concentration sensor made in MEMS technology. It allows gas detection in the range of 10 to 1000 ppm and has an analog output. DFRobot SEN0570
zł25.04
24h
Available quantity: 3
Available
Module with a formaldehyde sensor made in MEMS technology. It allows gas detection in the range of 0 to 3 ppm and has an analog output. DFRobot SEN0563
zł23.95
24h
Available quantity: 3
Available
Module with ethanol sensor made in MEMS technology. It allows gas detection in the range of 1 to 500 ppm and has an analog output. DFRobot SEN0569
zł25.90
24h
Available quantity: 1
Available
zł22.55
24h
Available quantity: 3
Available
Module with nitrogen dioxide sensor made in MEMS technology. It allows gas detection in the range of 0.1 to 10 ppm and has an analog output. DFRobot SEN0574
zł40.73
24h
Available quantity: 3
Available
Formaldehyde sensor (HCHO) dedicated to measuring ambient air quality. It is used to detect whether the surrounding environment exceeds a set concentration threshold. It is powered by a voltage of 5 V to 24 V and has an output in the form of a two-state digital signal. DFRobot SEN0595
zł106.84
24h
Available quantity: 1
Available
Module with a CO2 sensor based on the XENSIV PAS CO2 system from Infineon. It enables precise measurement of CO2 concentration in ppm via I2C, UART and PWM interfaces. SparkFun SEN-2295
zł339.00
3 weeks
No product available!
SenseCAP CO2, Temperature and Humidity Sensor - CO2, temperature and humidity sensor with RS485 &...
Digital sensor dedicated to measuring carbon dioxide (CO2), air temperature and relative humidity. High performance, fast response and excellent stability make it an ideal solution for a variety of applications such as greenhouses, cities, poultry farms and transport stations. Seeed Studio 101991029
zł394.66
4 weeks
No product available!
A digital gas and air quality sensor that measures eCO2, TVOC, and the AQI air quality index. The device utilizes metal-oxide technology with four sensor sections and an embedded microcontroller, simplifying operation and integration with Arduino, Raspberry Pi, and CircuitPython platforms. The sensor supports I2C and SPI interfaces, as well as temperature and humidity compensation using an external sensor. The compact design and STEMMA QT/Qwiic standard allow for easy integration into projects. Adafruit 6431
zł118.28
24h
Available quantity: 3
Available
A compact 3-in-1 module that simultaneously measures CO₂ concentration, temperature, and humidity. With 2.4 GHz Wi-Fi connectivity and MQTT and REST API support, it easily integrates with IoT systems and cloud platforms. It offers local data storage, a built-in web server, and an RGB indicator for air quality. Numato Lab NLSENZA002
zł921.45
24h
Available quantity: 1
Available
An environmental sensor based on the BME688 sensor, enabling simultaneous measurement of temperature, humidity, atmospheric pressure, and air quality. The device detects volatile organic compounds and calculates CO₂ equivalent and IAQ, allowing for accurate monitoring of indoor conditions. Communication via an I2C interface ensures easy integration with microcontrollers and platforms such as Arduino and UIFlow. M5Stack U169
zł109.00
24h
Available quantity: 1
Available
SGP41 gas sensor module for VOC and NOx measurement with I2C interface and STEMMA QT/Qwiic connectors, equipped with dual MOX sensing elements. Adafruit 6455
zł103.52
24h
Available quantity: 1
Available
Ozone (O₃) sensor breakout featuring an MQ131 sensing element, an analog AO output and a digital DO output. An onboard potentiometer allows adjustment of the digital output threshold. The module operates from a 5V supply and can be used in ozone monitoring projects and systems working with ozone generators. Soldered 333110