Category: Expansion modules
Subcategories
There are 139 products.
Module of a 4-channel driver of DC motors with RP2040 microcontroller. It allows the connection of encoders and is equipped with a QW/ST connector. Pimoroni PIM636
Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Pimoroni PIM630
Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM638
Module with a matrix LED RGB 7x16 display (112 LEDs) designed to work with the Raspberry Pi Pico. It communicates via a digital interface. Pimoroni PIM546
Module for building a weather station equipped with a controller based on Raspberry Pi Pico W. Pimoroni PIM628
Module with an RFID reader designed to work with the Raspberry Pi Pico. Equipped with an OLED display and a buzzer. SB Components 21192
Module with a color LCD IPS display with a screen diagonal of 1.14" and a resolution of 240x135 px, dedicated to the Raspberry Pi Pico. It communicates via the SPI interface. Pimoroni PIM543
2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21284
Module with a 3-color e-Paper display with a diagonal of 4.2" and a resolution of 400x300 px. Communication via the SPI interface. Waveshare Pico-ePaper-4.2-B
RGB LED matrix display with a resolution of 64x32 (2048 LED) for Raspberry Pi Pico. Equipped with RTC clock, light sensor, buzzer and IR receiver. Waveshare Pico-RGB-Matrix-P3-64x32
QVGA monochrome camera module with HM01B0 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0315
Monochrome VGA camera module with HM0360 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0319
Module with IPS LCD display with a diagonal of 2" and a resolution of 320x240 px. Communication via the SPI interface. Pimoroni PIM580
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. Pimoroni PIM555
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets (male and female) of 2x20 pins. DFRobot DFR0836
Module with a flexible e-Paper display with a diagonal of 2.9" and a resolution of 296x128 px. Communication via the SPI interface. Waveshare Pico-ePaper-2.9-D
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes and two areas of 8x20 holes with a pitch of 2.54 mm with marked pin labels. SB Components 21505
Module with black and white e-Paper display, 3.7" diagonal and 480x280 px resolution. Communication via SPI interface. Waveshare Pico-ePaper-3.7
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. SB Components 21314
2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 120 V AC or 24 V DC and currents up to 2 A. SB Components 21376