Category: Main categories

The clamp meter can measure DC voltage, AC voltage and current, capacitance, frequency, temperature and resistance. Equipped with diode test function, circuit continuity test and NCV test. Aneng ST180

Solar panel with an output voltage of 5.5 V and a power of 0.4 W. It has dimensions of 65 x 65 x 3 mm and pads for soldering the wires

Cooling fan dedicated to the NVIDIA Jetson Orin NX and Orin Nano minicomputers. Waveshare Orin-FAN-PWM

Module with e-Paper display, 6" diagonal and 1448x1072 px resolution. Communication via USB, SPI or I80 interface. Waveshare 6inch HD e-Paper HAT

Module with relay HF152FD 16A. It allows you to control devices with a current consumption of up to 16A using a low-power signal. The module has a relay activation time of about 10ms. DFRobot DFR0251

The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8

A module with a 1.69" colour IPS LCD display with a resolution of 240x280 pixels. It has rounded corners and uses the ST7789V2 controller (SPI interface). Waveshare 1.69inch LCD Module

Mobile robot chassis equipped with Mecanum four-wheel drive. Modular design allows for easy development of the project. Ideal for building your first mobile robot. Waveshare Robot-Chassis-MS

Mobile robot chassis equipped with four-wheel drive. Modular design allows for easy development of the project. Ideal for building your first mobile robot. Waveshare Robot-Chassis-NS

A digital multimeter that is used to measure electrical quantities such as AC and DC voltage, AC and DC current, resistance, capacitance and frequency, and temperature. It has an LCD display and backlight, as well as functions for automatic range change, measurement stop and circuit continuity test. Aneng AN8009

BME680 integrated gas, pressure, temperature and humidity sensor module housed in a single MEMS housing. It is equipped with an I2C and SPI interface. Waveshare BME680 Environmental Sensor

IPS 5" round LCD display with touch panel. It is equipped with HDMI for video display and USB Type C for touchscreen. It has a resolution of 1080 x 1080 pixels. Waveshare 5inch 1080x1080 LCD

Omnidirectional ceramic antenna dedicated to GNSS systems. It can work with receivers operating in BeiDou, GPS and GLONASS systems. It has a cable terminated with an IPEX 1 connector. Waveshare GNSS Ceramic Antenna

Module with liquid level sensor. The set includes a current-voltage converter that generates an analog signal. DFRobot KIT0139

Power module based on a DC-DC Step-Down converter with a current efficiency of up to 12 A. The output voltage is adjustable in the range from 0 V to 50 V. The power supply offers power up to 600 W. WZ5012L

Power module based on a DC-DC Step-Down converter with a current efficiency of up to 20 A. The output voltage is adjustable in the range from 0 V to 50 V. The power supply offers power up to 1000 W. WZ5020L

The module is based on the ESP8266MOD chip. Thanks to the support of the 802.11 b/g/n standard, it enables wireless communication with WiFi networks, which allows for Internet access and data exchange. WeMos D1 Mini Type-C

Module with an ozone detection sensor that performs measurements in the range of up to 10 ppm with a resolution of 0.01 ppm. The module is equipped with an I2C interface. DFRobot SEN0321

Wireless controller with built-in Bluetooth module and USB type C output. SparkFun WIG-17265

Wireless controller with built-in Bluetooth module and USB type C output. SparkFun WIG-17266