Category: Main categories

A modernized version of the popular Pololu 3pi mobile robot. The robot was based on the AVR ATmega32U4 microcontroller with the Arduino bootloader and OLED display. Kit version. Pololu 4979

A modernized version of the popular Pololu 3pi mobile robot. The robot was based on the AVR ATmega32U4 microcontroller with the Arduino bootloader and OLED display. Kit version. Pololu 4977

Evaluation board with nRF52840 microcontroller and bluetooth communication. Equipped with motion, temperature, light, sound sensors and RGB diodes. Can be programmed in CircuitPython or Arduino IDE. Adafruit 4333

The expansion module (shield) is designed for Teensy 4.0 and Teensy 4.1 boards. It allows you to easily connect displays from the SmartMatrix series. Adafruit 4828

Module with digital barometer BMP390. It enables pressure measurement from 300 to 1250 hPa and temperature from -40℃ to 85℃. Communicates via I2C or SPI. Adafruit 4816

Single-channel DC motor driver with an operating voltage from 8 to 28 V and a continuous current up to 160 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDS160A

Multimeter that allows you to measure DC voltage up to 1000 V, AC voltage up to 750 V, DC current up to 10 A and resistance. The meter is equipped with a diode and transistor tester and a buzzer

Module with a 3-color (yellow, black, white) e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px. SPI interface. Pimoroni PIM367

Camera with a resolution of 2 MPx with a USB interface. Equipped with CMOS IMX291 sensor with 86° lens, microphone, housing and tripod. ArduCAM B0354

M.2 M Key to M.2 A Key connector adapter with USB communication support. It allows, among others, to connect modules with M.2 A Key connector to the Raspberry Pi CM4 base board. Waveshare M.2 M KEY TO M.2 A KEY

Camera with a resolution of 1 MPx with a USB interface. Equipped with a GC1024 sensor with a lens with a 128° angle of view and LED lighting. ArduCAM U6060

Camera with OV2640 CMOS sensor with a resolution of 1600x1200 px. It communicates via the SCCB parallel interface. ArduCAM U0061

Metal case with fan for Raspberry Pi 4 model B in gray

Micro analog servo with metal gear. It has a range of motion of 145°. EMAX ES08MA

Micro digital servo with metal gear. It has a range of motion of 180°. TowerPro MG90S

Aluminum case for minicomputer Raspberry Pi 4 model B, gray color

Module with a color LCD IPS display with a screen diagonal of 4" and a resolution of 800x480 px, dedicated to the Raspberry Pi. It communicates via the DSI interface. Pimoroni PIM370

Aluminum case for minicomputer Raspberry Pi 4 model B, black color

HAT module with RTC DS3231SN clock and MAX705 reset system designed for Raspberry Pi and Jetson Nano. The board has a CR1220 battery socket and a C-type USB connector. Waveshare RTC WatchDog HAT

A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. Pimoroni PIM555