.png)
Category: Main categories
Subcategories
There are 22903 products.
Automatic punches are used to precisely mark points on materials such as wood, metal or plastic, making it easier to start drilling by limiting the movement of the drill; are equipped with an internal spring eliminating the need to use a hammer and allow you to adjust the impact force depending on the hardness of the material. Yato YT-47160
Spring-loaded test needle for connecting and testing modules without soldering
Plastic enclosure Z97 lightgray ABS
Pin strip straight in green, single-row, female, 1x6, pitch 2.54mm, THT, RoHS. Set of 10 pieces PB06S GREEN
A solar cell with a power output of 0.7 W and a voltage output of 5.5 V, measuring 95 x 95 x 3 mm, equipped with pads for soldering wires. Ideal for powering small electronic devices in DIY projects.
Infrared sensor module with TCRT5000. Can be used to detect objects in close proximity or detect lines in "Line Follower" robots
Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0150-O
The protection system for four Li-Ion cells with a voltage of 14.8 V. The module has the function of charging the cells, discharging and protecting against excessive discharge. The cells can be discharged with a continuous current of up to 18 A
Lanberg Cat. 6A patch cord with Fluke Passed certification guarantees the highest quality and reliability, enabling optimal network connection compatible with various network devices in any environment. Lanberg PCF6A-10CC-0500-O
Single operational amplifier STMicroelectronics LMV321LILT type Rail-to-Rail. It is designed to work with low supply voltages (supply voltage range 2.7V-5V), the maximum current consumption of the system is 250uA (at 5V voltage). System in the SOT23-5 housing
Din rail enclosure Z101 lightgray
A connector that allows you to connect the cable to the existing installation without having to cut the cable. Suitable for wires with a cross-section of 0.75mm2
The module is designed for learning electronics in the form of a kit for self-assembly. It allows you to get acquainted with the operating principle of the NE555 chip and the CD4017 counter
Metal detector module in the form of a kit for self-assembly. A spiral probe is placed on the board, thanks to which the module can detect the presence of a metal object from a distance of 60 mm
Permanent cylindrical neodymium magnet with a diameter of 2 mm and a height of 1 mm. Set of 10 pcs
Development board based on the RP2040 microcontroller combines a dual-core Arm Cortex-M0+ processor with the W6300 Ethernet controller featuring a hardware TCP/IP stack and native IPv4/IPv6 support. The board maintains compatibility with Raspberry Pi Pico while adding a 10/100 Mb/s Ethernet interface with an RJ45 connector and optional Power over Ethernet support using the WIZPoE-P1 module. It is designed for IoT applications, industrial automation, network communication systems, and embedded devices requiring reliable wired Ethernet connectivity. WIZnet W6300-EVB-Pico
LCD and Keypad Shield for Arduino compatible boards, LCD 2x16, 5 keys and RESET key, RoHS