.png)
Category: Main categories
Subcategories
There are 21367 products.
Module with the HR1124S DC motor controller with a maximum current of 1.2 A. It can be powered with the voltage from 1.8 V to 6.8 V and is controlled by two PWM signals
USB 2MP camera with a Sony 1/2.8 inch sensor, M12 lens with a 95 degree field of view, and support for 1080p video at 30 fps, intended for operation in low light conditions. ArduCam B052001
100 W audio signal converter that reduces the speaker signal from the player to the level of RCA inputs. It allows you to connect the radio to an external power amplifier
Module with 1 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4301
Extension module dedicated to matrix displays with HUB75 interface. Designed for minicomputers Raspberry Pi. Adafruit 3211
Distance Measuring Sensor Unit Digital output (100 mm) type, voltage 2.7V-6.2V, Sharp, RoHS
Two-channel driver of direct current (DC) motors with an operating voltage from 5 to 30 V and a maximum continuous current of 10 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron MDD10A
Zeenko ZK07-BM is a low-noise, wideband amplifier with very high gain, powered by a battery and intended for operation in the 30 MHz – 6 GHz band. Ideal for compensating losses in long antenna lines, it provides up to 43 dB of gain and very good noise performance. Recommended for installation as close to the antenna as possible in receiving and measurement paths.
A small module matching the contact plate based on a 32-bit microcontroller with ARM Cortex M7 core. Has a microSD slot. PJRC TEENSY41
M12 mount lens included with adapter. 8 mm focal length and 50° FoV. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN024
Thermal paste with gold particles, designed to fill microscopic surface irregularities between components requiring efficient heat transfer, including processors, electronic components and heatsinks. Thermal conductivity is >3.57 W/mK, with an operating temperature range from -50°C to 250°C and short-term temperature resistance up to 340°C. The paste provides good dielectric properties and can also be used in industrial equipment and energy systems. The ART.AGT-163 variant is supplied in a syringe containing 1 g of paste. AG TermoPasty ART.AGT-163
Female terminal block, 6-pin. Pitch 3.5mm. Height 7.8mm. Suitable for KF2EDGR male strips with a pitch of 3.5 mm. 2EDGKN-3.5
Module with 8x8 LED matrix in red and HT16K33 driver. The board is equipped with an XH2.54 connector and communicates via I2C
The Sunon EF50151B3-1B00U-A99 fan is a compact cooling solution for electronic, industrial and automotive applications where reliability, quiet operation and safety of use are important. With a wide operating voltage range, ball bearings and compliance with flammability standards, it is used in devices requiring constant cooling in harsh environmental conditions. Sunon EF50151B3-1B00U-A99
0.3 x 70 mm cleaning needles are precision tools for removing dirt and filament residue from 3D printer nozzles, improving print quality and extending the life of the device. Made of durable stainless steel, they guarantee safe cleaning of small diameter nozzles without the risk of damage.
Female terminal block, 3-pin. Pitch 3.5mm. Height 7.8mm. Suitable for KF2EDGR male strips with a pitch of 3.5 mm. 2EDGKN-3.5
J-Link 6-pin Needle Adapter (8.06.16)