Category: Main categories
Subcategories
There are 24127 products.
Double-sided universal plate 168 plated holes, size 20x80mm, made of laminate FR-4 with a thickness of 1.6mm. Ideal for creating electrical, electronic and prototype circuits using THT
Permanent cylindrical neodymium magnet with a diameter of 15 mm and a height of 5 mm.
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 4 GB LPDDR4 RAM, 32 GB eMMC and wireless connectivity. Raspberry Pi CM4104032
The KAmod USB-C Adapter Module allows for the connection of a USB-C port to almost any electronic system. The pin header provides only the essential signals, including 5V power and D+ and D- data lines.
AOZ8000HI is a compact, low-capacitance 4-channel ESD protection TVS diode array, ideal for safeguarding high-speed data interfaces in mobile and industrial electronics
32bit ARM Cortex-M0, 32K Flash, 4K RAM, HVQFN33, RoHS
COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 300 mA, offering a wide beam angle of 120 °
Connector for connecting the 50-pin tape with 0.5 mm pitch to the printed circuit board. PCA-6-LA-50-HL-3
KAmod RPI5 REL+POW is a module enabling the powering of Raspberry Pi 5 from a voltage of 8-32 V and the control of receivers up to 3 A via two relays, with an additional digital input with galvanic separation based on an optocoupler
LoLin NodeMCU V3 is a board with ESP8266 (ESP12E). The ESP8266 system provides WiFi connectivity (802.11 b / g / n). The USB-UART converter (CH340G chip) is located on the board. The module can be programmed in Lua (under the control of the NodeMCU firmware) or in the Arduino environment. There are 10 GPIO lines available.
LT8911EXB is a video signal bridge IC enabling integration of eDP displays with platforms using the MIPI interface. It is intended for projects requiring conversion between video transmission standards in embedded and industrial devices. Proper operation requires appropriate hardware design and configuration according to the manufacturer’s documentation.
M3 hex nut, height: 2.7mm, made of white polyamide, Fix & Fasten, RoHS
Light-emitting diode (LED) with a beam angle of 120 ° and luminosity of 100 mcd. The maximum current of the diode is I max = 20mA (2.0V), and the wavelength is 474 nm (green). LED ALS-0805G-00100-120
Tact switch button with dimensions 3x7x3.5mm, designed for surface mounting. Set of 10 pieces
Module with the Infineon Optiga SLB 9670 TPM 2.0 cryptographic chip. It uses the SPI interface for communication and is compatible with all versions of the Raspberry Pi. LetsTrust TPM
A set of EC5 connectors (male plug and female socket with contacts) with a maximum forward current of 40 A. It works well as a battery connector or a power connector in RC models. Amass EC5