Gravity: I2C ADS1115 16-Bit ADC Module - ADC converter module
ID: 571680
€18.22
Tax included
€14.81 tax excl.
Gravity: I2C ADS1115 The 16-Bit ADC Module is an analogue-to-digital converter module for Arduino and Raspberry Pi. This module uses 16-bit ADC ADS1115 and is powered by 3.3 ... 5V. DFRobot DFR0553
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Gravity: I2C ADS1115 The 16-Bit ADC Module is an analogue-to-digital converter module for Arduino and Raspberry Pi . This module uses 16-bit ADC ADS1115 and is powered by 3.3 ... 5 V. The system has a precise reference voltage and programmable gain control (PGA), so accurate collection and conversion can be performed for both permanent and very high variable signals.
One ADC module can read analog signals from 4 channels. Thanks to the built-in I2C address selection switch, it supports the connection of two ADC modules and can read analog signals from 8 channels. Thanks to this, it allows for a significant expansion of the capabilities of baseboards not equipped with a larger number of analog inputs.
Attention!
The voltage at the analog input contacts must be less than VCC + 0.3 V.
The voltage at the analog input contacts must be less than VCC + 0.3 V.
properties
- Analog detection range: 0 ... VCC
- Number of analogue channels: 4
- ADC resolution: 16 bits
- Interface: I2C
- Gravity connector
- Power consumption: 2 ... 3 mA
- Supply voltage: 3.3 ... 5 V
- Product size: 32 x 32 mm
Included
- Gravity module: I2C ADS1115 16-bit ADC
- Male goldpin connector (XH2.54-4pin)
- Connecting cable Gravity (Gravity-4P I2C / UART Sensor Wire)
571680
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with 4-channel ADC ADS1115 converter. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 1085
€20.71 24hAvailable quantity: 4 AvailableModule with 4-channel ADC ADS1015 converter. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 1083
€13.49 24hAvailable quantity: 2 AvailableADC and DAC converter module based on the PCF8591 system with I2C and the possibility of cascading other I2C modules. Waveshare PCF8591 AD DA Board
Delivery date unknown No product available!
Other products in the same category (16)
Module with 4-channel ADC ADS1015 converter. The system enables analog voltage conversion for single signals and differential signals with 12-bit resolution. I2C communication
€7.31 6 weeks No product available!
A 2-channel DAC converter module with an output voltage range from 0 to 10 V. It is powered by 3.3 V to 5 V and communicates via I2C interface (Gravity connector). It is used as a controller in industrial applications. DFRobot DFR0971
€12.93 24hAvailable quantity: 7 AvailableModule with 12-bit DAC converter and built-in EEPROM memory. The module is supplied with the voltage from 2.7 to 5.5V, the I2C interface is used for communication. SparkFun BOB-12918
€7.59 24hAvailable quantity: 4 AvailableModule with 8 inputs for data acquisition from 0-24 mA analog current inputs. It communicates via Ethernet interface and supports Modbus TCP protocol. The board is enclosed in an industrial enclosure. GM4008
€66.05 24hAvailable quantity: 2 AvailableModule with 4-channel ADC ADS1115 converter. The system enables analog voltage conversion for single signals and differential signals with 16-bit resolution. I2C communication
€3.27 24hAvailable quantity: 15 AvailableGravity module designed based on the GP8501 system. It is a two-channel DAC (analog-to-digital) converter with PWM communication that offers an output signal with 8-bit resolution and 0.5% accuracy. It allows you to generate analog signals with a voltage range from 0 to 2.5 V or from 0 to VCC. DFRobot DFR1037
€9.99 24hAvailable quantity: 4 AvailableModule with 8 inputs for data acquisition from 0-24 mA analog current inputs. It communicates via RS485 interface and supports Modbus RTU protocol. The board is enclosed in an industrial enclosure. GM1008
€61.08 24hAvailable quantity: 1 AvailableDAC converter module with current output in the range of 0 to 25 mA. It is powered by 18 V to 24 V and communicates via I2C interface (Gravity connector). It is used as a controller in industrial applications. DFRobot DFR0972
€13.12 24hAvailable quantity: 3 Available- Available
Demonstration board with Linear Technologies LTC2360 12-bit digital-to-analogue converter. The system is ideal for use in communication systems, data acquisition, mobile and car devices. DC1190A-E
Regular price€92.61€72.93 24hAvailable quantity: 2 AvailableAudio expansion module with CS4344 24-bit DAC converter. Numato Lab EXPAUD002
€25.22 6 weeks No product available!
Advanced ADC converter module with four channels of analog inputs for Qwiic projects, offering high resolution of 24 bits and the ability to work with single-channel and differential inputs. With a programmable amplifier, the ability to select a reference voltage and support for up to 16 modules on one I2C bus, it is an ideal solution for applications requiring precise measurement of analog signals. Sparkfun SPX-23455
€32.84 24hAvailable quantity: 1 AvailableModule with an 8-channel ADC converter with 8-bit resolution. It uses the ADS7830 chip and is equipped with a STEMMA QT connector, thanks to which it communicates via the I2C interface. Adafruit 5836
€8.08 24hAvailable quantity: 1 AvailableModule with 24-bit ADC NAU7802 converter. It enables reading data from strain gauges and scales. I2C interface. SparkFun SEN-15242
€22.57 24hAvailable quantity: 12 AvailableGravity module designed based on the GP8413 system. It is a two-channel DAC (analog-to-digital) converter with I2C communication that offers an output signal with a resolution of 15-bit and an accuracy of 0.2%. It allows you to generate analog signals with a voltage range from 0 to 10 V or 0 to 5 V. DFRobot DFR1073
€15.35 24hAvailable quantity: 3 AvailableExtension module with ADC AD9250 converter dedicated to FPGA boards. It offers 4 input channels with a resolution of 14 bits and an ANSI/VITA 57.1 FMC connector. Numato Lab NLFMCADC001
€1,596.49 6 weeks No product available!
Gravity: I2C ADS1115 The 16-Bit ADC Module is an analogue-to-digital converter module for Arduino and Raspberry Pi. This module uses 16-bit ADC ADS1115 and is powered by 3.3 ... 5V. DFRobot DFR0553