Module with 4-channel 12-bit ADC ADS1015 converter
ID: 587531
5906623475476
zł16.16
Tax included
zł13.14 tax excl.
Module with 4-channel ADC ADS1015 converter. The system enables analog voltage conversion for single signals and differential signals with 12-bit resolution. I2C communication
Description
Module with 4-channel ADC ADS1015 converter. The system enables analog voltage conversion with 12-bit resolution for both single and differential signals. It has a programmable gain value built in, so it can measure small voltage changes. The system has the possibility of sampling with a frequency of up to 3.3 kHz with an input voltage ranging from ± 256 mV to ± 6.114 V. Communication takes place via the I2C interface, the address of which can be modified using the ADDR pin. The user also has an interrupt output that allows the converter to be configured to generate a signal for a specific event.
Features
- Working modes: single conversion, continuous conversion (default) and recursive
- Measurement type: single signal, differential signal
- Input voltage range: GND to VDD
- FSR: ± 0.256V to ± 6.114V (Default: 2.048V)
- Resolution: 12-bit
- LSB: 0.125 mV - 3 mV (default: 1 mV)
- Sampling frequency: 128 Hz to 3.3 kHz
- I2C communication
- I2C addresses: 0x48, 0x49, 0x4A, 0x4B
- Voltage (VDD): 2V to 5.5V
- Current consumption: 150 μA to 200 μA
- Working temperature: from -40°C to 125°C
Kit contains
- ADC ADS1015 converter module
- 10-pin straight male goldpin connector
587531
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Gravity: I2C ADS1115 The 16-Bit ADC Module is an analogue-to-digital converter module for Arduino and Raspberry Pi. This module uses 16-bit ADC ADS1115 and is powered by 3.3 ... 5V. DFRobot DFR0553
zł72.56
24h
Available quantity: 4
Available
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.35
24h
Available quantity: 201
Available
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.31
Delivery date unknown
No product available!
A set of 40 pcs of male-male connecting cables in various colors, 10 cm long
zł5.49
24h
Available quantity: 13
Available
A module with a 3-channel ADC ADC ADS1015, which allows you to read voltages from -24 V to +24 V with a sampling frequency of up to 3.3 kHz and a resolution of 12 bits. Pimoroni PIM422
zł97.26
24h
Available quantity: 4
Available
Other products in the same category (16)
Module with the driver of the resistive touch panel. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5423
zł24.94
24h
Available quantity: 1
Available
3-channel voltage and current monitoring module designed to work with the Raspberry Pi. It can measure voltage ranging from 0 to 26 V and voltage ± 3.2 A. SB Components 20805
zł93.81
24h
Available quantity: 2
Available
The sound card in the form of a module with a USB type B socket. It uses the ES9018K2M DAC converter, has a 3.5 mm jack audio output and two RCA connectors
zł126.71
4 weeks
No product available!
Module with 8-bit ADC and 8-bit DAC. It allows you to measure voltage and generate an analog signal. Communicates via I2C
zł6.42
4 weeks
No product available!
Module with 4-channel ADC ADS1015 converter. The system enables analog voltage conversion for both single signals (11-bit resolution) and differential signals (12-bit resolution). I2C communication. SparkFun DEV-15334
zł92.94
24h
Available quantity: 1
Available
Module with 8 inputs for data acquisition from 0-24 mA analog current inputs. It communicates via RS485 interface and supports Modbus RTU protocol. The board is enclosed in an industrial enclosure. GM1008
zł259.58
24h
Available quantity: 2
Available
8-channel module with current analog outputs ranging from 0 to 20 mA. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in a housing that can be mounted on an industrial rail. Waveshare Modbus RTU Analog Output 8CH
zł88.41
4 weeks
No product available!
Gravity module designed based on the GP8512 system. It is a single-channel DAC (analog-to-digital) converter with I2C communication that offers an output signal with a resolution of 15-bit and an accuracy of 0.01%. It allows you to generate analog signals with a voltage range from 0 to 2.5 V or from 0 to VCC. DFRobot DFR1035
zł42.61
24h
Available quantity: 3
Available
A module with a 24-bit differential ADC NAU7802 optimized for reading strain gauges in a Wheatstone bridge configuration. It offers high precision force or mass measurements. Thanks to the I2C interface, ready-made libraries and screw connectors, it is easy to integrate, especially in mobile and DIY projects. Adafruit 4538
zł30.33
24h
Available quantity: 1
Available
Extension module with ADC AD7616 converter dedicated to FPGA boards. It offers 32 channels with a resolution of 16 bits and an FMC LPC connector. Numato Lab NLFMCADC002
zł6,195.01
3 weeks
No product available!
A module with a 3-channel ADC ADC ADS1015, which allows you to read voltages from -24 V to +24 V with a sampling frequency of up to 3.3 kHz and a resolution of 12 bits. Pimoroni PIM422
zł97.26
24h
Available quantity: 4
Available
Module with 8 voltage analog outputs with a range from 0 to 10 V. It communicates via the RS485 interface and supports communication within the Modbus RTU protocol. The board is enclosed in a housing that can be mounted on an industrial rail. Waveshare Modbus RTU Analog Output 8CH (B)
zł89.73
4 weeks
No product available!
Gravity: I2C 12-Bit DAC is a module with 12-bit DAC and built-in EEPROM memory. The module is powered by 3.3 ... 5V for communication used by the I2C interface. DFRobot DFR0552
zł21.81
24h
Available quantity: 3
Available
DFRobot DFR0316
zł54.67
24h
Available quantity: 6
Available
Module with 12-bit DAC converter and built-in EEPROM memory. The module is supplied with the voltage from 2.7 to 5.5V, the I2C interface is used for communication. SparkFun BOB-12918
zł32.58
24h
Available quantity: 3
Available
Gravity module designed based on the GP8413 system. It is a two-channel DAC (analog-to-digital) converter with I2C communication that offers an output signal with a resolution of 15-bit and an accuracy of 0.2%. It allows you to generate analog signals with a voltage range from 0 to 10 V or 0 to 5 V. DFRobot DFR1073
zł59.24
24h
Available quantity: 2
Available
Module with 4-channel ADC ADS1015 converter. The system enables analog voltage conversion for single signals and differential signals with 12-bit resolution. I2C communication