Qwiic 12 Bit ADC - module with 4-channel ADC ADS1015 converter
ID: 581502
5906623418060
zł92.94
Tax included
zł75.56 tax excl.
Module with 4-channel ADC ADS1015 converter. The system enables analog voltage conversion for both single signals (11-bit resolution) and differential signals (12-bit resolution). I2C communication. SparkFun DEV-15334
Description
Module with 4-channel ADC ADS1015 converter. The system enables analog voltage conversion for both single signals (11-bit resolution) and differential signals (12-bit resolution). It has a built-in programmable gain value, so it can measure even very small voltage changes. ADS1015 uses an internal reference voltage, but the user can also connect their own 3.3V to increase the accuracy of the measurements. Additionally, a potentiometer has been connected to the A3 channel to facilitate the first configuration of the module. Communication takes place via the I2C interface. On the product page there is a guide and the Arduino library.
Features
- Working modes: single conversion, continuous conversion (default) and cyclic
- Measurement type: single signal, differential signal
- Input voltage range: GND to VDD
- Full Scale Range (FSR): ± 0.256V to ± 6.114V (Default: 2.048V)
- Resolution: 12-bit (differential) or 11-bit (single signal)
- LSB size: 0.125 mV - 3 mV (Default: 1 mV)
- Sampling frequency: 128 Hz to 3.3 kHz
- Screw clamps
- I2C communication
- I2C addresses: 0x48 (default), 0x49, 0x4A, 0x4B
- 2 x Qwiic connector
- Built-in 10K potentiometer (A3 channel)
- Voltage (VDD): 2 V to 5.5 V (3.3 V for Qwiic)
- Current consumption (typical): 150 μA to 200 μA
- Working temperature: -40°C to 125°C
581502
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
zł5.97
24h
Available quantity: 37
Available
Available
Available
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
zł12.56
24h
Available quantity: 22
Available
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
zł12.96
24h
Available quantity: 9
Available
Other products in the same category (16)
Gravity module designed based on the GP8503 system. It is a two-channel DAC (analog-to-digital) converter with I2C communication that offers an output signal with 12-bit resolution and 0.1% accuracy. It allows you to generate analog signals with a voltage range from 0 to 2.5 V or from 0 to VCC. DFRobot DFR1034
zł47.24
24h
Available quantity: 3
Available
A compact board with eight 12-bit DACs that allow precise voltage control on each output via I2C communication. Compatible with 3.3V or 5V, it offers flexibility with a reference voltage setting and STEMMA QT or Qwiic connectors for easy integration with other I2C devices. Adafruit 6223
zł131.12
24h
Available quantity: 5
Available
8-channel module with current analog outputs ranging from 0 to 20 mA. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in a housing that can be mounted on an industrial rail. Waveshare Modbus RTU Analog Output 8CH
zł88.41
4 weeks
No product available!
DAC converter module with current output in the range of 0 to 25 mA. It is powered by 18 V to 24 V and communicates via I2C interface (Gravity connector). It is used as a controller in industrial applications. DFRobot DFR0972
zł50.28
24h
Available quantity: 5
Available
Module with 4-channel ADC ADS1115 converter. The system enables analog voltage conversion for single signals and differential signals with 16-bit resolution. I2C communication
zł14.90
4 weeks
No product available!
Extension module with ADC AD9250 converter dedicated to FPGA boards. It offers 4 input channels with a resolution of 14 bits and an ANSI/VITA 57.1 FMC connector. Numato Lab NLFMCADC001
zł6,785.09
3 weeks
No product available!
Audio module based on a 32-bit PCM5102A DAC converter intended for cooperation, among others with Raspberry Pi minicomputers. Communication via the I2S interface. GY-PCM5102
zł26.83
24h
Available quantity: 2
Available
A module with a stereo DAC converter based on the UDA1334A chip. It can generate a signal with a resolution of 16, 20 or 24 bits. It communicates via the I2S interface. Adafruit 4037
zł70.16
4 weeks
No product available!
Module with 4-channel 12-bit DAC MCP4728 converter with built-in EEPROM memory. Equipped with a STEMMA QT connector, it communicates using the I2C bus. Adafruit 4470
zł38.62
24h
Available quantity: 3
Available
ADC converter module with 7 measurement channels (measuring 0-5V, 0-10V voltage and 4-20 mA current). Communicates via RS485 industrial interface using Modbus RTU protocol. R4AVA07
zł40.52
4 weeks
No product available!
A 16-bit DAC converter module designed to work with M5Stack sets. It enables the conversion of analog signals into a digital signal. M5Stack ADC Unit
zł31.89
24h
Available quantity: 9
Available
Audio module designed for Teensy 3.2, 3.5, 3.6 and 4.0. It uses the PT8211 16-bit digital to analog converter (DAC) chip. PJRC PT8211-AUDIO-KIT
zł17.32
24h
Available quantity: 5
Available
12-bit DAC converter module designed to work with the M5Stack sets. It enables the conversion of digital signals into an analog signal. M5Stack DAC Unit
zł38.90
24h
Available quantity: 3
Available
A module with a 24-bit ADC converter HX711, which allows you to read data from strain gauges and scales. It communicates via the serial interface. SparkFun SEN-13879
zł54.45
24h
Available quantity: 2
Available
Demonstration board with Linear Technologies LTC2360 12-bit digital-to-analogue converter. The system is ideal for use in communication systems, data acquisition, mobile and car devices. DC1190A-E
Regular pricezł393.60zł309.96
24h
Available quantity: 2
Available
Dual-channel DAC converter compatible with the SYZYGY standard. The module can simultaneously generate two 5V signals with 14-bit resolution and sampling frequency up to 100MS/s. The module is compatible with Eclypse Z7 and Genesys ZU evaluation kits. Digilent Zmod AWG 1411 410-397
zł647.15
3 weeks
No product available!
Module with 4-channel ADC ADS1015 converter. The system enables analog voltage conversion for both single signals (11-bit resolution) and differential signals (12-bit resolution). I2C communication. SparkFun DEV-15334