Qwiic Pro RF - IoT development kit with SAMD21G18A and LoRa 915MHz
ID: 581510
5906623420520
zł164.81
Tax included
zł133.99 tax excl.
Development kit with SAMD21G18A microcontroller with ARM Cortex M0+ core and LoRa RFM95W radio communication module. SparkFun WRL-15836
Description
Development kit with SAMD21G18A microcontroller with ARM Cortex M0+ core and LoRa RFM95W radio communication module. The SAMD21G18A microcontroller has a built-in 256 KB of Flash memory and an external 32 MHz quartz. The LoRa module enables radio communication in the 915 MHz band. For communication over shorter distances (up to 1.5 km), the user can connect a short antenna with a length of approx. 7.6 cm to the ANT pin, while communication over longer distances, an antenna with better parameters is required, connected to the u.FL connector. Due to its small dimensions, the set is perfect for projects related to IoT (Internet of Things). In addition, the module has a JST-PH connector and a built-in LiPo battery charger, which makes it a portable device. on the product page there is a tutorial and Arduino library as well as numerous examples.
Features
- SAMD21G18A microcontroller with ARM Cortex M0 + core
- Flash memory 256 kB
- 32 MHz external oscillator
- 4 digital and 5 analog IO pins
- LoRa RFM95W modem
- Point to Point function
- Frequency range: 915 MHz
- Spread factor: 6-12
- Range up to 1.5 km in the line of sight
- U.FL antenna connector
- Charger for LiPo 500 mA batteries
- Qwiic connector
- A jumper that disconnects the power LEDs
- PTH pins for debugging (SWD)
581510
Data sheet
- Microcontroller
- ATSAMD21E18
- Core
- Cortex-M0+
- Frequency
- 48MHz
- Flash memory
- 256kB
- RAM
- 32kB
- EEPROM memory
- none
- Number of digital pins
- 4
- Number of PWM channels
- 4
- Ilość wejść analogowych
- 5
- ADC
- 1x 12bit
- DAC
- none
- CAN
- none
- USB
- 1
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- GSM/GPRS module
- No
- Logic voltage
- 3,3 V
- MicroSD slot
- No
- Supply voltage min
- 3,5 V
- Supply voltages max
- 6 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Blue USB 3.0 A cable - microUSB 3.0 B with 1m length, allowing SuperSpeed transmission (up to 5Gbit / s = 625MB / s)
zł13.36
24h
Available quantity: 11
Available
Available
Available
Li-Po battery 3.7V / 220mAh. Connector + JST-BEC 2,54, 2 pins, PCM protection, cable length 150mm. Akyga LP402036
zł17.18
24h
Available quantity: 3
Available
Li-Po battery 3.7V / 980mAh, PCM protection, connector, 2 pins, cable length 150mm. Akyga LP573450
zł24.28
Delivery date unknown
No product available!
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-W
zł3.49
Delivery date unknown
No product available!
Other products in the same category (16)
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino Nano kit. It has a USB C. The board also has a USB-UART converter, a microphone, Lipo battery charging and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15443
zł111.57
24h
Available quantity: 2
Available
The Fio v3 is a new spin on the Arduino Fio hardware powered by the ATmega32U4. Not only is it small and LiPo-ready, it’s a very capable XBee-ready development board. DEV-11520
zł212.57
24h
Available quantity: 1
Available
This board combines the simplicity of the UNO’s Optiboot bootloader (which is used in the Pro series), the stability of the FTDI (which we all missed after the Duemilanove was discontinued) and the R3 shield compatibility of the latest Arduino UNO R3. SparkFun DEV-13975
zł95.23
24h
Available quantity: 1
Available
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino UNO kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15444
zł146.44
24h
Available quantity: 2
Available
Available
The SparkFun AST-CAN485 board is a miniature Arduino in a compact Pro Mini housing with a built-in CAN (Control Area Network) and RS485 ports. Sparkfun DEV-14483
zł315.22
24h
Available quantity: 1
Available
A small module, matching the breadboard, containing a 32-bit microcontroller with ARM Cortex M7 core. PJRC TEENSY40
zł128.39
24h
Available quantity: 22
Available
SparkFun MicroView is a board with an ATmega328P microcontroller from the AVR family and an OLED 64 x 48 pixel display. DEV-12923
zł237.80
3 weeks
No product available!
Pro Micro is similar to Pro Mini Arduino compatible board, main difference is that Pro Micro uses ATmega32u4 with builtin USB connectivity. Sparkfun DEV – 12587
zł132.18
3 weeks
No product available!
Base board compatible with Arduino. It was equipped with the ATSAMD21G18 microcontroller. It has 26 I/O lines and 14 analog inputs. SparkFun DEV-14812
zł171.87
3 weeks
No product available!
Development kit with ATSAMD21E microcontroller with ARM Cortex M0+ core. The chip can be clocked at 48 MHz, has a built-in 256 KB of Flash memory and 32 KB of SRAM. The module has a Qwiic connector. SparkFun DEV-15423
zł110.56
24h
Available quantity: 1
Available
Development board equipped with ATSAMD21G18 microcontroller. It has 30 I/O lines, including SERCOM interfaces and 14 analog inputs. Compatible with Arduino. SparkFun DEV-13672
zł164.38
24h
Available quantity: 2
Available
IoT development board the size of Arduino, equipped with an ARM Cortex-M3 processor (STM32F205) and a Wi-Fi communication module (with an integrated antenna and uFL connector). SparkFun DEV-13321
zł204.39
24h
Available quantity: 1
Available
No product available!
Development board with NXP iMXRT1062 ARM Cortex-M7 microcontroller. Equipped with a microSD slot. Version without Ethernet communication. PJRC TEENSY41-NE-PINS
zł186.30
24h
Available quantity: 5
Available
Base board compatible with Arduino. It was equipped with an Atmega 328P microcontroller. It has 14 I/O lines (including 6 PWM channels) and 6 analog inputs. SparkFun DEV-14525
zł128.77
24h
Available quantity: 1
Available
Development kit with SAMD21G18A microcontroller with ARM Cortex M0+ core and LoRa RFM95W radio communication module. SparkFun WRL-15836