![Fermion HR8833 DC Motor Driver - two-channel controller for DC 10V/1.5A motors Fermion HR8833 DC Motor Driver - two-channel controller for DC 10V/1.5A motors](https://kamami.pl/27546-large_default/fermion-hr8833-dc-motor-driver-two-channel-controller-for-dc-10v15a-motors-dri0040.jpg)
![Fermion HR8833 DC Motor Driver - two-channel controller for DC 10V/1.5A motors Fermion HR8833 DC Motor Driver - two-channel controller for DC 10V/1.5A motors](https://kamami.pl/27546-large_default/fermion-hr8833-dc-motor-driver-two-channel-controller-for-dc-10v15a-motors-dri0040.jpg)
zł17.45 tax excl.
Two-channel DC motor driver based on the HR9933 circuit. It allows you to control the movement of drives with a supply voltage of up to 10 V and power consumption up to 1.5 A. DFRobot DRI0040
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Dual-channel driver for DC motors that can control the movement of the drive with a supply voltage of up to 10 V and a current consumption of up to 1.5 A per channel. It uses the H HR8833 moastka system and is controlled by the PWM signal. It has a 5 V output, which allows for powering external modules, including e.g. a control board. Full documentation and examples of use are available on the product page.
Data sheet
This gearmotor is a miniature high-power, 6 V brushed DC motor with a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
A small, high-power motor with a 1000: 1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 35 RPM, a maximum torque of 10 kg * cm and carbon brushes with increased durability. Pololu 3046
No product available!
Small, high power motor with 1000: 1 metal gear, 12 V operating voltage, power consumption from 0.06 A to 0.75 A, speed 35 RPM, maximum torque of 10 kg * cm, carbon brushes with increased strength and double-sided shaft. Pololu 3057
No product available!
This add-on board enables a Raspberry Pi B+, Pi A+, Pi 2 or Pi 3 to drive a pair of brushed DC motors. Its dual MC33926 motor drivers operate from 5 V to 28 V and can deliver a continuous 3 A (5 A peak) per motor. The default pin mappings make it easy to get started using our provided software, but the board also exposes most of the driver chips’ I/O pins for more specialized applications.
DC motor driver that allows you to control the movement of three drives using the I2C interface. Board with soldered connectors. Pololu 5033
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5041
No product available!
Two-channel DC motor driver powered with the voltage from 2.5 to 12 V with a maximum continuous current of 0.8 A per channel. It can control a bipolar stepper motor
RoboClaw 2x60AHV Motor Controller (V7C) is a two-channel DC motor driver, operating voltage: 10,5 to 60V, maximum continuous current: 60A, the ability to easily implement feedback loops with PID controller, security systems. Pololu 3583
No product available!
No product available!
This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 Voperating range and are efficient enough to deliver a continuous 18 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation.
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 V operating range and are efficient enough to deliver a continuous 18 A without a heat sink.
Dual DC motor controller with voltage from 2.5 to 9.5V with 1A continuous current per channel. Has an embedded voltage regulator. Cytron Maker Drive
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5036
No product available!
TB9051FTG Single Brushed The DC Motor Driver Carrier is a single DC motor driver that allows the motor to be supplied with voltage in the 4.5 ... 28V range and power consumption at a continuous 2.6 A (5A peak) operation. Pololu 2997
The ESC RC controller module is designed for brush motors with a supply voltage from 3.5 to 6 V and a capacity of 1 A
Direct current motor driver (DC) with a working voltage from 7 to 58 V and a maximum continuous current of 25 A. It can be controlled by a PWM signal, a potentiometer or by means of built-in buttons. Cytron MD25HV
Pololu Simple High-Power Motor Controller 18v15
No product available!
MP6550 DC motor controller module. It can work with motors supplied with voltage from 1.8 to 22 V and current consumption up to 1.7 A. Pololu 4733
Pololu Dual G2 High-Power Motor Driver 18v22 is an extension that allows you to control two DC motors designed for Arduino tiles. The motor can be supplied with 6.5 ... 30V voltage and can draw up a maximum current of 22A. Polol 2517
No product available!
Two-channel DC motor driver based on the HR9933 circuit. It allows you to control the movement of drives with a supply voltage of up to 10 V and power consumption up to 1.5 A. DFRobot DRI0040