zł129.42 tax excl.
Programmable COB RGB LED strip measuring 5 m in length, featuring 800 LEDs at a density of 160 LEDs/m and WS2812B-compatible control chips. Powered by 5 V, it offers power consumption of up to 12 W/m, a width of 2.7 mm, and a 180° beam angle. Supports RGB color control with 256 brightness levels per channel and a total of 60 independently controlled segments. The flexible design with an adhesive backing allows installation in furniture, computer cases, and decorative lighting systems. The strip can be cut at designated points every 12.5 mm. The 5 m version features a male SM 3PIN input connector and additional power supply wires at the end of the strip. Waveshare RGB-27-5V-160D-5M
The Waveshare RGB-27-5V-160D-5M programmable COB RGB LED strip measures 5 m in length and uses Chip On Board (COB) technology to provide uniform light diffusion across the entire illuminated surface. A density of 160 LEDs per meter, totaling 800 LEDs, and a 180° beam angle produce a continuous line of light without clearly visible individual light points. The strip operates at 5 V, with a maximum power consumption of approximately 12 W/m, equivalent to 60 W for the entire length. Its 2.7 mm width allows installation in narrow profiles, furniture gaps, display cabinets, and computer cases.
WS2812B-compatible control chips enable programming of colors and lighting effects through a single-wire data interface. Each segment supports three RGB channels with 256 brightness levels per channel, allowing smooth color transitions and animations. According to the manufacturer's documentation, each meter of the strip contains 12 independently controlled segments measuring approximately 83.3 mm each, providing a total of 60 segments along the 5 m strip. Control requires an external controller generating a signal compatible with the WS2812B protocol. The strip is suitable for decorative lighting installations, microcontroller-based electronics projects, and illuminating computer workstations and interior furnishings.

The flexible design with an adhesive backing allows the strip to conform to the shape of a surface and be cut at designated points every 12.5 mm. The 5 m version features a male SM 3PIN input connector and additional power supply wires at the end of the strip to help compensate for voltage drops. The red wire provides +5 V power, the white wire is the GND connection, and the green wire carries the data signal. Maximum current consumption is approximately 12 A at 5 V, so powering the entire strip requires a power supply with sufficient current capacity and consideration of additional power injection points. The IP20 protection rating makes the strip suitable for use in dry indoor environments. Detailed connection and control information is available in the Waveshare technical documentation.
Data sheet
Manufacturer
Responsible person
Programmable COB RGB LED strip measuring 1 m in length, featuring 160 LEDs per meter and WS2812B-compatible control chips. Powered by 5 V, it offers power consumption of up to 12 W/m, a width of just 2.7 mm, and a 180° beam angle. Supports RGB color control with 256 brightness levels per channel and 12 independently controlled segments per meter. The flexible design with an adhesive backing allows installation in furniture, computer cases, and decorative lighting systems. The strip can be cut at designated points every 12.5 mm. The 1 m version features SM 3PIN input and output connectors. Waveshare RGB-27-5V-160D-1M
LED strip with addressable RGB WS2815 diodes on a black PCB. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP67
LED strip with addressable RGB WS2815 diodes on a black PCB. It is powered by 12 V DC, has a length of 1 m and 144 LEDs/m. Protection level IP67
LED strip with COB diodes in white (warm). It is powered by 12 V DC, has a length of 1 m and 384 LEDs/m. Protection level IP20
LED strip with COB diodes in white (warm). It is powered by 12 V DC, has a length of 5 m and 384 LEDs/m. Protection level IP20
LED strip with COB diodes in white (cold). It is powered by 12 V DC, has a length of 1 m and 384 LEDs/m. Protection level IP20
LED strip with COB diodes in white (cold). It is powered by 12 V DC, has a length of 5 m and 384 LEDs/m. Protection level IP20
LED strip with COB diodes in white (neutral). It is powered by 12 V DC, has a length of 1 m and 384 LEDs/m. Protection level IP20
LED strip with COB diodes in white (neutral). It is powered by 12 V DC, has a length of 5 m and 384 LEDs/m. Protection level IP20
LED strip with COB diodes in blue. It is powered by 12 V DC, has a length of 1 m and 384 LEDs/m. Protection level IP20
LED strip with COB diodes in blue. It is powered by 12 V DC, has a length of 5 m and 384 LEDs/m. Protection level IP20
LED strip with COB diodes in green. It is powered by 12 V DC, has a length of 1 m and 384 LEDs/m. Protection level IP20
LED strip with COB diodes in green. It is powered by 12 V DC, has a length of 5 m and 384 LEDs/m. Protection level IP20
LED strip with COB diodes in red. It is powered by 12 V DC, has a length of 1 m and 384 LEDs/m. Protection level IP20
LED strip with COB diodes in golden yellow. It is powered by 12 V DC, has a length of 1 m and 384 LEDs/m. Protection level IP20
LED strip with COB diodes in golden yellow. It is powered by 12 V DC, has a length of 5 m and 384 LEDs/m. Protection level IP20
LED strip with COB diodes in pink. It is powered by 12 V DC, has a length of 1 m and 384 LEDs/m. Protection level IP20
Programmable COB RGB LED strip measuring 5 m in length, featuring 800 LEDs at a density of 160 LEDs/m and WS2812B-compatible control chips. Powered by 5 V, it offers power consumption of up to 12 W/m, a width of 2.7 mm, and a 180° beam angle. Supports RGB color control with 256 brightness levels per channel and a total of 60 independently controlled segments. The flexible design with an adhesive backing allows installation in furniture, computer cases, and decorative lighting systems. The strip can be cut at designated points every 12.5 mm. The 5 m version features a male SM 3PIN input connector and additional power supply wires at the end of the strip. Waveshare RGB-27-5V-160D-5M