zł29.99 tax excl.
Programmable COB RGB LED strip measuring 1 m in length, featuring 160 LEDs per meter and WS2812B-compatible control chips. Powered by 5 V, it offers power consumption of up to 12 W/m, a width of just 2.7 mm, and a 180° beam angle. Supports RGB color control with 256 brightness levels per channel and 12 independently controlled segments per meter. The flexible design with an adhesive backing allows installation in furniture, computer cases, and decorative lighting systems. The strip can be cut at designated points every 12.5 mm. The 1 m version features SM 3PIN input and output connectors. Waveshare RGB-27-5V-160D-1M
The Waveshare RGB-27-5V-160D-1M programmable COB RGB LED strip measures 1 m in length and uses Chip On Board (COB) technology to provide uniform light diffusion across the entire illuminated surface. A density of 160 LEDs per meter and a 180° beam angle produce a continuous line of light without clearly visible individual light points. The strip operates at 5 V and consumes a maximum of approximately 12 W per meter. Its 2.7 mm width allows installation in narrow profiles, furniture gaps, display cabinets, and computer cases.
WS2812B-compatible control chips enable programming of colors and lighting effects through a single-wire data interface. Each segment supports three RGB channels with 256 brightness levels per channel, allowing smooth color transitions and animations. According to the manufacturer's documentation, each meter of the strip contains 12 independently controlled segments measuring approximately 83.3 mm each. Control requires an external controller generating a signal compatible with the WS2812B protocol. The strip is suitable for decorative lighting installations, microcontroller-based electronics projects, and illuminating computer workstations and interior furnishings.

The flexible design with an adhesive backing allows the strip to conform to the shape of a surface and be cut at designated points every 12.5 mm. The 1 m version features a male SM 3PIN input connector and a female SM 3PIN output connector, allowing additional sections to be connected. The red wire provides +5 V power, the white or black wire is the GND connection, and the green wire carries the data signal. Maximum current consumption is approximately 2.4 A at 5 V, so the power supply should provide sufficient power reserve. The IP20 protection rating makes the strip suitable for use in dry indoor environments. Detailed connection and control information is available in the Waveshare technical documentation.
Data sheet
Manufacturer
Responsible person
Programmable COB RGB LED strip measuring 5 m in length, featuring 800 LEDs at a density of 160 LEDs/m and WS2812B-compatible control chips. Powered by 5 V, it offers power consumption of up to 12 W/m, a width of 2.7 mm, and a 180° beam angle. Supports RGB color control with 256 brightness levels per channel and a total of 60 independently controlled segments. The flexible design with an adhesive backing allows installation in furniture, computer cases, and decorative lighting systems. The strip can be cut at designated points every 12.5 mm. The 5 m version features a male SM 3PIN input connector and additional power supply wires at the end of the strip. Waveshare RGB-27-5V-160D-5M
No product available!
Waterproof NeoPixel tape with RGB LED diodes, 1m long, 60 LEDs per meter, diodes are mounted on a flexible black PCB. Adafruit 1376
No product available!
LED strip with connector JST 200 mm (blue) (HK23344)
The versatile WS2812B RGB LED strip with a length of 5 meters and a density of 60 diodes per meter allows you to create dynamic lighting effects in various projects
LED RGB WS2812B, Black Strip, 1m, 60LEDs / m
LED RGB WS2812B, Black Strip, 5m, 30LEDs / m, no waterproof
LED RGB WS2812B, Black Strip, 1m, 30LEDs / m, no waterproof
Addressable WS2812B RGB LED strip with a length of 5 m and 300 LEDs arranged at a density of 60 LEDs per meter. Individual control of each LED enables advanced lighting effects, while the IP67 silicone coating provides protection against dust and moisture
Waterproof NeoPixel tape with RGB LED diodes with a length of 2 m, 60 LEDs per meter, diodes are mounted on an elastic PCB in black. Adafruit 1376
RGB LED WS2812B LEDs on a black strip, 144 LEDs per 1m. The diodes are not protected against water. The strips can be cut or joined into ranks
WS2812B
5 m long LED strip with 100 purple LEDs. It is powered with the voltage of 12 V through the DC connector 5.5 x 2.1 mm. DFRobot FIT0385-P
Tape with RGB LEDs WS2812B 1m long, 144 LEDs per meter, the diodes are mounted on a flexible white PCB. The diodes are not protected against water.
RGB LED strip consisting of 120 colorful WS2812 LEDs. The diodes are controlled by one signal line. The strip can be arbitrarily bent or cut. Equipped with adhesive tape for easy assembly. DFRobot FIT0612
Waterproof strip with RGB LED diodes, 1 m long (60 LEDs per meter). The LEDs are mounted on a flexible white PCB, the tape has a Grove connector. Seeed Studio 104020109
Waterproof strip with RGB LED diodes, 1 m long (30 LEDs per meter). The LEDs are mounted on a flexible white PCB, the tape has a Grove connector. Seeed Studio 104020108
LED strip with addressable RGB WS2813B diodes on a black PCB. It is powered by 5 V DC, has a length of 1 m and 144 LEDs/m. Protection degree IP65
Programmable COB RGB LED strip measuring 1 m in length, featuring 160 LEDs per meter and WS2812B-compatible control chips. Powered by 5 V, it offers power consumption of up to 12 W/m, a width of just 2.7 mm, and a 180° beam angle. Supports RGB color control with 256 brightness levels per channel and 12 independently controlled segments per meter. The flexible design with an adhesive backing allows installation in furniture, computer cases, and decorative lighting systems. The strip can be cut at designated points every 12.5 mm. The 1 m version features SM 3PIN input and output connectors. Waveshare RGB-27-5V-160D-1M