TB67S249FTG - Pololu stepper motor driver module
ID: 571805
5906623478705
zł68.66
Tax included
zł55.82 tax excl.
TB67S249FTG stepper motor driver module supplied with 10-47V voltage and working current of 1.7A. The controller allows you to control the motor movement up to 7 different resolutions (up to 1/32 of a step). Pololu 2973
Description
TB67S249FTG Stepper Motor Driver Carrier is a stepper motor driver module based on the Toshiba TB67S249FTG chipset. The controller allows you to control the motor movement up to 7 different resolutions (up to 1/32 of a step) using DMODE0, DMODE1 and DMODE2. The module is supplied with voltage in the range of 2- 5.5 V (logic part), and the motor can be supplied with 10-47 V voltage. The continuous current of the motor should not exceed 1.7 A, and the momentary 4.5 A. The module control is simple and requires only two pions of the microcontroller (direction and step signal). The controller can be used to build a 3D printer or CNC milling machine based on stepper motors.
Attention!
Connecting or disconnecting the stepper motor when the controller is powered can destroy the controller.
An example of a controller connection
properties
- Based on the Toshiba TB67S249FTG chip
- Engine power supply: 10 V to 47 V
- Maximum continuous current per phase without additional cooling: 1.7 A (peak 4.5 A)
- A simple step and direction control interface
- Seven different step modes: full step, round half-stage, 1/2 degree, 1/4 degree, 1/8 degree, 1/16 degree and 1/32 degree
- Adjustable current control allows you to set the maximum output power using a potentiometer
- Detection of load opening
- Error outputs
- Reverse voltage protection
- Voltage lock and protection against overload / short circuit and overheating
- Built-in regulator (without external logic supply)
- It can work directly with 3.3 V and 5 V systems
- Dimensions: 25.5 x 35.5 mm
- Weight: 4.3 g
Included
- Driver TB67S249FTG Stepper Motor Driver Carrier
- 3 x 2-pin screw connector
- 2 x straight male goldpin connector
571805
Data sheet
- Output current
- 1.7A
- Number of channels
- 2
- Supply voltage min
- 10 V
- Supply voltages max
- 47 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
DRV8825 Stepper Motor Driver Carrier is a DRV8825 stepper motor driver that allows you to supply a bipolar current of up to 1.5 A per phase, without using a heat sink. The system can be supplied with voltage up to 45V, in the set there is a heat sink. Polol 2133
zł60.10
24h
Available quantity: 1
Available
A4988 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2981
zł47.48
24h
Available quantity: 2
Available
TB67S279FTG stepper motor controller module supplied with 10 ... 47V voltage and 1.2A working current. The controller allows you to control the motor movement up to 7 different resolutions (up to 1/32 of a step). Pololu 2974
zł57.01
24h
Available quantity: 1
Available
Other products in the same category (16)
A compact stepper motor controller with a TMC2225 system with an operating voltage from 4.75 to 36 V. It offers smooth, quiet operation, high efficiency, various operating modes and easy configuration. It is controlled via a STEP/DIR or UART interface and is an ideal solution for 3D printers and similar applications
zł16.36
24h
Available quantity: 5
Available
Compact expansion module compatible with DRV8825 and A4988 stepper motor drivers. It allows you to connect the module with the controller and convenient connection of other system components
zł5.20
24h
Available quantity: 25
Available
Extension module (shield) with a stepper motor driver for Arduino. It allows you to control drives operating with a voltage of up to 40 V and a current consumption of up to 2 A per coil. DFRobot DRI0035
zł149.90
4 weeks
No product available!
The Tic T825 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).
zł172.99
4 weeks
No product available!
The pad for use with shallow Feather series contains two TB6612 chips that allow you to control DC motors or stepper motors. The I2C interface is used to communicate with the overlay. Adafruit 2927
zł113.25
24h
Available quantity: 3
Available
Module with a stepper motor driver based on the DRV8434 system. It allows you to power a bipolar motor with a current of up to 1.2 A per phase and a voltage from 4.5 V to 48 V. Pololu 3763
zł50.50
24h
Available quantity: 2
Available
TMC5130A-BOB is a compact breakout board with the TMC5130A-TA chip, designed for rapid prototyping of motion control solutions. Its high microstepping resolution, encoder support, and wide operating voltage range make it a suitable choice for projects such as 3D printers, CNC axis controllers, and robotic manipulators.
zł116.73
24h
Available quantity: 8
Available
The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).
zł287.59
24h
Available quantity: 3
Available
Module with TMC2208 stepper motor driver. It enables control with a supply voltage ranging from 5.5 to 34 V and a current of up to 1,2 A
zł20.43
24h
Available quantity: 15
Available
Tic T500 USB Multi-Interface Stepper Motor Controller
zł134.39
24h
Available quantity: 1
Available
Extension module with a driver for two stepper motors based on the DRV8825 system. Dedicated for Raspberry Pi minicomputers. Waveshare Stepper Motor HAT
zł111.67
4 weeks
No product available!
DRV8834 Low-Voltage Stepper Motor Driver Carrier
zł43.43
24h
Available quantity: 3
Available
A compact controller that enables precise control of bipolar stepper motors. It offers high precision movement thanks to the ability to control a stepper motor with a resolution of up to 1/128 steps and two control interfaces - clock-in step control and serial commands. SparkFun ROB-25167
zł48.98
24h
Available quantity: 3
Available
Stepper motor driver that can work with a voltage in the range from 20 to 50 V and a maximum current of 5.6 A. It allows you to configure the microstep in the range from 2 to 128. DM556
zł76.67
24h
Available quantity: 4
Available
The stepper motor driver with Allegro A4988 (A4988 Stepper Motor Driver Carrier) allows you to supply a bipolar current of up to 2A per phase. The system can be supplied with voltage up to 35V, in the set there is a heat sink. It is compatible with Polol 1182
zł5.57
24h
Available quantity: 102
Available
TB6612FNG dual DC motor controller module. It can be used as a stepper motor driver or solenoid driver. Adafruit 2448
zł33.91
24h
Available quantity: 2
Available
TB67S249FTG stepper motor driver module supplied with 10-47V voltage and working current of 1.7A. The controller allows you to control the motor movement up to 7 different resolutions (up to 1/32 of a step). Pololu 2973