TB67S279FTG - Pololu stepper motor driver module
ID: 571804
5906623478699
zł57.01
Tax included
zł46.35 tax excl.
TB67S279FTG stepper motor controller module supplied with 10 ... 47V voltage and 1.2A working current. The controller allows you to control the motor movement up to 7 different resolutions (up to 1/32 of a step). Pololu 2974
Description
TB67S279FTG Stepper Motor Driver Carrier is a stepper motor driver module based on the Toshiba TB67S279FTG chipset. The controller allows you to control the motor movement up to 7 different resolutions (up to 1/32 of a step) using DMODE0, DMODE1 and DMODE2. The module is supplied with voltage in the range of 2 ... 5.5 V (logical part), and the motor can be supplied with 10 ... 47 V. The continuous current of the motor should not exceed 1.2 A, and the momentary 2 A. Control room the module is simple and requires only two pions of the microcontroller (direction and step signal). The controller can be used to build a 3D printer or CNC milling machine based on stepper motors.
Attention!
Connecting or disconnecting the stepper motor when the controller is powered can destroy the controller.
An example of a controller connection
properties
- Based on the Toshiba TB67S279FTG chip
- Engine power supply: 10 V to 47 V
- Maximum continuous current per phase without additional cooling: 1.2 A (peak 2 A)
- A simple step and direction control interface
- Seven different step modes: full step, round half-stage, 1/2 degree, 1/4 degree, 1/8 degree, 1/16 degree and 1/32 degree
- Adjustable current control allows you to set the maximum output power using a potentiometer
- Detection of load opening
- Error outputs
- Reverse voltage protection
- Voltage lock and protection against overload / short circuit and overheating
- Built-in regulator (without external logic supply)
- It can work directly with 3.3 V and 5 V systems
- Dimensions: 25.5 x 35.5 mm
- Weight: 4.3 g
Included
- TB67S279FTG Stepper Motor Driver Carrier driver
- 3 x 2-pin screw connector
- 2 x straight male goldpin connector
571804
Data sheet
- Output current
- 1,2 A
- Number of channels
- 2
- Supply voltage min
- 10 V
- Supply voltages max
- 47 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
DRV8825 Stepper Motor Driver Carrier is a DRV8825 stepper motor driver that allows you to supply a bipolar current of up to 1.5 A per phase, without using a heat sink. The system can be supplied with voltage up to 45V, in the set there is a heat sink. Polol 2133
zł58.49
24h
Available quantity: 1
Available
A4988 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2981
zł47.48
24h
Available quantity: 2
Available
A4988 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2980
zł40.81
Delivery date unknown
No product available!
TB67S249FTG stepper motor driver module supplied with 10-47V voltage and working current of 1.7A. The controller allows you to control the motor movement up to 7 different resolutions (up to 1/32 of a step). Pololu 2973
zł68.66
24h
Available quantity: 1
Available
Other products in the same category (16)
TB67S249FTG stepper motor driver module supplied with 10-47V voltage and working current of 1.7A. The controller allows you to control the motor movement up to 7 different resolutions (up to 1/32 of a step). Pololu 2973
zł68.66
24h
Available quantity: 1
Available
Extension module with a driver for two stepper motors based on the HR8825 system. Dedicated for Raspberry Pi minicomputers. Waveshare Stepper Motor HAT (B)
zł78.58
24h
Available quantity: 2
Available
Extension module with a driver for two stepper motors based on the DRV8825 system. Dedicated for Raspberry Pi minicomputers. Waveshare Stepper Motor HAT
zł111.67
4 weeks
No product available!
The module with a 4-channel L293D DC motor driver, designed to work with the Raspberry Pi. It can work with a voltage from 6 to 24 V and a current of up to 600 mA. SB Components 08001
zł78.77
24h
Available quantity: 1
Available
Module with a 2-channel driver for DC motors L293D designed to work with the Raspberry Pi Pico. It can work with a voltage from 6 to 12 V and a current of up to 600 mA. SB Components 21468
zł85.90
24h
Available quantity: 1
Available
Module with a stepper motor driver based on the DRV8434A system. It allows the bipolar motor to be powered with a current of up to 1.2 A per phase and can be supplied with the voltage from 4.5 V to 45 V. Pololu 3764
zł54.74
4 weeks
No product available!
Dual-channel electric motors controller (H-bridge) Arduino Motor Shield Rev3 with L298 for controlling two DC motors or one stepper motor with the possibility of using an electronic brake.
zł143.53
24h
Available quantity: 1
Available
The stepper motor driver with Allegro A4988 (A4988 Stepper Motor Driver Carrier) allows you to supply a bipolar current of up to 2A per phase. The system can be supplied with voltage up to 35V, in the set there is a heat sink. It is compatible with Polol 1182
zł5.57
24h
Available quantity: 118
Available
A compact stepper motor controller with a TMC2225 system with an operating voltage from 4.75 to 36 V. It offers smooth, quiet operation, high efficiency, various operating modes and easy configuration. It is controlled via the STEP/DIR interface and is an ideal solution for 3D printers and similar applications. BIGTREETECH TMC2225 V1.0
zł19.70
24h
Available quantity: 11
Available
DRV8711 stepper motor driver module powered by 8-50V voltage and 4A operating current. The controller allows you to control the movement of the engine with up to 9 different resolutions. Configuration via SPI interface. Pololu 3730
zł139.29
24h
Available quantity: 5
Available
Stepper motor driver that can work with a voltage in the range from 20 to 50 V and a maximum current of 5.6 A. It allows you to configure the microstep in the range from 2 to 128. DM556
zł76.67
24h
Available quantity: 6
Available
A4988 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2981
zł47.48
24h
Available quantity: 2
Available
Simple to use stepper motor driver, compatible with anything that can output a digital 0..5V pulse or 0..3.3V pulse. Connect a 4-wire stepper motor and a microcontroller and you’ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. ROB-12779
zł87.16
3 weeks
No product available!
Two-channel driver of direct current (DC) motors with an operating voltage from 4 to 16 V and a maximum continuous current of 3 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron MDD3A
zł35.01
24h
Available quantity: 9
Available
The Tic T825 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).
zł181.13
4 weeks
No product available!
Module with a stepper motor driver based on the DRV8434 system. It allows you to power a bipolar motor with a current of up to 1.2 A per phase and a voltage from 4.5 V to 48 V. Pololu 3762
zł46.48
4 weeks
No product available!
TB67S279FTG stepper motor controller module supplied with 10 ... 47V voltage and 1.2A working current. The controller allows you to control the motor movement up to 7 different resolutions (up to 1/32 of a step). Pololu 2974