Adjustable Stand for Portable Monitors 4–18.5" - Waveshare 33202

The expansion module (shield) is designed for Arduino boards. It enables easy connection of 16x32 and 32x32 matrix displays. Requires self-assembly. Adafruit 2601

Extension module dedicated to matrix displays with HUB75 interface. Designed for minicomputers Raspberry Pi. Adafruit 3211

The expansion module (shield) is designed for Feather nRF52840 boards. It enables easy connection of 16x32, 32x32 and 64x32 matrix displays. Requires self-assembly. Adafruit 4702

The NFC module kit based on the ST25R3911B chip and the STM32F103RBT6 microcontroller enables wireless transfer of graphics from a microSD card to Waveshare e-Paper displays with NFC. Equipped with a 1.3" OLED display, a CP2102 USB-UART converter, 1 Mbit SRAM memory and user interfaces, it supports rapid prototyping of NFC applications and wireless communication systems. Waveshare 17623

Driver for e-Paper displays in the form of an overlay for Arduino and Nucleo. The SPI interface is used for communication with the controller. Waveshare e-Paper Shield

Driver enabling operation of displays with an RGB-666 connector with resolutions from 480x272 to 800x600 pixels. Equipped with an ESP32-S3 microcontroller with 16 MB Flash memory and 8 MB PSRAM memory. Powered and programmable via USB Type-C connector. Adafruit 5800

The magnetic holder is an ideal solution for mounting small USB monitors or phones. It provides a stable grip and is easy to install. Waveshare Magnetic Holder

FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-300mm

FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. Black EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-500mm

Module with I2C driver based on the HT16K33 system. It is equipped with STEMMA QT connectors and is dedicated to 8x8 LED matrix displays with a diagonal of 1.2". Adafruit 1048

An expansion board equipped with a 24-pin FPC connector, designed for the SeeedStudio XIAO series boards. Enables smooth control of the ePaper display. Seeed Studio 105990172

The LED_CGG128064M-XXW is a white LED backlight designed for COG displays of the "CF" series and graphic displays of the "MN" series. It operates at a voltage of approximately 3.3 V with a maximum current of 20 mA.

The ESL-Gateway-AP base station is a key infrastructure component for electronic label systems based on e-paper technology. With WiFi and BLE connectivity and PoE power support, it enables centralized and wireless content management on ESL labels in commercial and industrial environments. Ideal for automated real-time labeling of shelves, products, and assets.

An acrylic diffuser for Pico 2W Unicorn tiles that effectively softens and disperses the intense light from LEDs. The translucent layer makes the pixels larger, blurrier, and much easier on the eyes, improving comfort during long-term use. The kit is ideal for desktop installations, wall mounts, and decorative projects. Pimoroni PIM714

An acrylic diffuser for the Pico 2W Unicorn Galactic board, which effectively softens and disperses the intense light from LEDs. The translucent layer makes the pixels larger, blurrier, and much easier on the eyes, improving comfort during long-term use. The set is ideal for desktop installations, wall mounts, and decorative projects. Pimoroni PIM713

Magnetic stand for portable monitors compatible with screens from 4" to 18.5", equipped with an N52 neodymium magnet, multi-axis position adjustment, and a foldable design. Includes magnetic mounting rings. Waveshare Mini Monitor Stand (B)